http://meder.com/mount-reed-sensor-mk18-uk.html

MK18 proximity sensors are magnetically operated Reed switches in a cylindrical housing, fitted with interconnect cable. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. The Reed Sensor and magnet must be fixed in a definite distance to each other. Introduction or removal of the magnet determines the closing and opening of the Reed Switch.

http://meder.com/reed-sensor_mk16_en.html

MK16 are magnetically operated Reed proximity switches for SMD mounting.Lead design 1: Flat, straight leads for PCB slot mounting.Lead design 2: Flat, bent SMD leads.The sensors are supplied taped & reeled according to IEC 286/part 3 suitable for auto-placement. The special features of this series are the small dimensions of only 15.6 x 2.3 x 2.3 mm and the simple internal structure (low-cost version).

http://meder.com/reed-sensor-mk11-uk.html

MK11 sensors are magnetically operated Reed Sensors with screw thread enclosure supplied with interconnect cable. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch. The magnetic pull-in / drop-out sensitivity is divided into five AT ranges. A choice of switches, termination options and cable lengths is offered

http://meder.com/reed-sensor-mk17-en.html

MK17 are magnetically operated Reed proximity sensors for SMD mounting.Lead design 1: Flat, straight leads for PCB mounting.Lead design 2: Flat, bent SMD leads.Lead design 3: J leadThe sensors are supplied taped & reeled according to IEC 286 / part 3 suitable for auto-placement. The special features of this series are the small dimensions of only 12.5 x 2.1 x 2.1mm and the simple internal structure (low cost version).

http://meder.com/reed-sensor-mk15-en.html

MK15 are magnetically operated Reed proximity sensors for SMD mounting. Lead design 1: Flat, straight leads for PCB slot mounting. Lead design 2: Flat, bent SMD leads. The sensors are supplied taped & reeled according to IEC 286 / part 3 suitable for auto-placement. The magnetic pull-in sensitivity is divided in several AT classes at 5 AT steps each. The special features of this series are the small dimensions of only 19.5 x 2,5 x 2.5mm and the simple internal structure (low cost version).

http://meder.com/reed-sensor-mk06-uk.html

The MK06 proximity sensors are magnetically operated Reed Switches for direct PCB mounting . The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. The Reed Sensor and the magnet must be fixed in a definite distance to each other. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch. 2.54 mm PCB pin spacing, available with different distances.

http://meder.com/reed-sensor-mk13-uk.html

MK13 sensors are magnetically operated Reed proximity switches in a case with an interconnect cable. The technical design corresponds to the series MK04 except for the long mounting holes offering the possibility of individual adjustment. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch.

http://meder.com/mk09-reed-sensors-uk.html

MK09 sensors are magnetically operated Reed proximity switches potted into a standard Hirschmann connector casing according to “DIN 43650 / type AM3”. In combination with the corresponding Hirschmann socket a coupling with firmly defined position is achieved.

http://meder.com/reed-sensor-mk04-uk.html

MK04 sensors are magnetically operated Reed proximity switches designed for screw mounting. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch.

http://meder.com/reed-sensor-mk05-uk.html

MK05 sensors are magnetically operated Reed proximity switches designed for screw mounting. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch.