Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=10 mm. - For Cylinder Range CD70. -For Piston Diameter D=25 mm.

Supplier:
User Library
Model Name:
Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=10 mm. - For Cylinder Range CD70. -For Piston Diameter D=25 mm.
Configuration Name:
Part Number:
CGK_10
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 20,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGK_10
Name:Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=10 mm. - For Cylinder Range CD70. -For Piston Diameter D=25 mm.
Description:Based on the official Bosch Rexroth documentation, a self-aligning clevis (swivel head) with an internal bush diameter (CN) of 10 mm for a CD70 cylinder with a 25 mm piston is the CGK 10. Product Specifications The CGK 10 swivel head is the correct accessory for the CD70 cylinder series . The key specifications for this component are listed below . Parameter Specification for CGK 10 Type CGK 10 Material No. R900001653 Internal Bush Diameter (ØCN) 10 mm Thread (KK) M10 Weight (approx.) 0.07 kg Static Load Rating (C0) 17.6 kN Max. Admissible Load (Fadm) 5.8 kN Misalignment Angle (Z) 12 ... 15° Note: The document specifies that the CGK 10 is "Cannot be re-lubricated" . Compatibility The CGK 10 is specifically documented as part of the accessory range for the CD70 and CG70 cylinder series . The CD70 series has a nominal pressure of 70 bar [7 MPa] with piston diameters ranging from 25 to 200 mm , confirming it is the correct component for your specified CD70 cylinder with a 25 mm piston diameter. The standard for this swivel head is ISO 12240-4 .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)