Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 125. - For Cylinder Range CDH2 , Piston Diameter D=200 mm. - ISO 6982 , DIN 24338.

Supplier:
User Library
Model Name:
Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 125. - For Cylinder Range CDH2 , Piston Diameter D=200 mm. - ISO 6982 , DIN 24338.
Configuration Name:
Part Number:
CGKD125
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 22,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGKD125
Name:Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 125. - For Cylinder Range CDH2 , Piston Diameter D=200 mm. - ISO 6982 , DIN 24338.
Description:The Rexroth CGKD 125 is the correct self-aligning clevis for your CDH2 cylinder with a 200 mm piston diameter, adhering to ISO 8132 standards for cylinder mounting accessories . 📊 CGKD 125 Specifications The key technical specifications for this component are detailed in the table below from the official Rexroth documentation : Parameter Specification for CGKD 125 Material no. R900322026 Nominal force 800,000 N Thread (KK) M100 x 3 Pin diameter (CN H7) 125 mm Weight (approx.) 52.5 kg Misalignment angle (Z) 4° Clamping screw M24 x 70 (ISO 4762-10.9) Tightening torque (MA) 710 Nm This swivel head is suitable for the CDH2 series with piston rod diameters of 125 mm or 140 mm for this particular piston size . 📌 Installation note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .
Supplier part number:CGKD125
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (14)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User