Fork Clevis CCKB -(Rexroth - Bosch) Accessories - ISO 8132 - Size 40. - For Cylinder Range CDH2. -For Piston Diameter D=63mm.

Supplier:
User Library
Model Name:
Fork Clevis CCKB -(Rexroth - Bosch) Accessories - ISO 8132 - Size 40. - For Cylinder Range CDH2. -For Piston Diameter D=63mm.
Configuration Name:
Part Number:
CCKB_40
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 24,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CCKB_40
Name:Fork Clevis CCKB -(Rexroth - Bosch) Accessories - ISO 8132 - Size 40. - For Cylinder Range CDH2. -For Piston Diameter D=63mm.
Description:Based on the official Bosch Rexroth technical documentation, the correct Fork Clevis CCKB for your CDH2 cylinder with a 63mm piston diameter is the CCKB 40. The "Size 40" in the model name refers to the diameter of the required mounting pin . 📊 CCKB 40 Specifications for CDH2 (63mm Piston) The table below lists the key specifications and dimensions for the CCKB 40 from the official Rexroth data sheet . Parameter Specification for CCKB 40 Type CCKB 40 Material Number R900542847 Nominal Force 80,000 N For Cylinder (Piston Ø) CDH2/CGH2/CSH2: 63 mm Pin Diameter (CK H9) 40 mm Thread (KK 6H) M33 x 2 Weight (approx.) 5.2 kg Clamping Screw M16 x 50 (ISO 4762-10.9) Tightening Torque (MA) 210 Nm Important Installation Note: The fork clevis must always be screwed against the piston rod thread stop. Afterwards, the clamping screws must be tightened with the specified tightening torque . The associated pin (40 mm diameter, tolerance m6) is included in the scope of supply but is not mounted in the factory .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (22)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)