Fork Clevis CCKB -(Rexroth - Bosch) Accessories - ISO 8132 - Size 32. - For Cylinder Range CDH2. -For Piston Diameter D=50mm.

Supplier:
User Library
Model Name:
Fork Clevis CCKB -(Rexroth - Bosch) Accessories - ISO 8132 - Size 32. - For Cylinder Range CDH2. -For Piston Diameter D=50mm.
Configuration Name:
Part Number:
CCKB_32
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 24,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CCKB_32
Name:Fork Clevis CCKB -(Rexroth - Bosch) Accessories - ISO 8132 - Size 32. - For Cylinder Range CDH2. -For Piston Diameter D=50mm.
Description:Based on the official Bosch Rexroth technical documentation, the correct Fork Clevis CCKB for your CDH2 cylinder with a 50mm piston diameter is the CCKB 32. The "Size 32" in the model name refers to the diameter of the required mounting pin . 📊 CCKB 32 Specifications for CDH2 (50mm Piston) The table below lists the key specifications and dimensions for the CCKB 32 from the official Rexroth data sheet . Parameter Specification for CCKB 32 Type CCKB 32 Material Number R900542846 Nominal Force 50,000 N For Cylinder (Piston Ø) CDH2/CGH2/CSH2: 50 mm Pin Diameter (CK H9) 32 mm Thread (KK 6H) M27 x 2 Weight (approx.) 2.8 kg Clamping Screw M12 x 40 (ISO 4762-10.9) Tightening Torque (MA) 85 Nm Important Installation Note: The fork clevis must always be screwed against the piston rod thread stop. Afterwards, the clamping screws must be tightened with the specified tightening torque . The associated pin (32 mm diameter, tolerance m6) is included in the scope of supply but is not mounted in the factory .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (22)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)