Rexroth - Bosch Accessories - pin set CAM50 Pin Set. -Bolt Diameter EK=50mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=56 Or Piston Rod End H With D=100 mm And d=70 mm

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - pin set CAM50 Pin Set. -Bolt Diameter EK=50mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=56 Or Piston Rod End H With D=100 mm And d=70 mm
Configuration Name:
Part Number:
CAM_50
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CAM_50
Name:Rexroth - Bosch Accessories - pin set CAM50 Pin Set. -Bolt Diameter EK=50mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=56 Or Piston Rod End H With D=100 mm And d=70 mm
Description:The search results do not contain the specific part number for a CAM50 Pin Set for the Rexroth CDM1 cylinder series. However, they provide the key technical specifications you need to identify the correct accessory. ✅ Confirmed CDM1 Cylinder Configuration Data The following table summarizes the technical details for your specified cylinder rod ends, based on the official Rexroth CDM1 catalog dimension tables: Specification Piston Rod End "G" (d=56 mm) Piston Rod End "H" (D=100 mm, d=70 mm) Piston Diameter (ØAL) 100 mm 100 mm Piston Rod Diameter (ØMM) 56 mm 70 mm Rod Thread (KK) M42 x 2 (ISO 6020/1) M48 x 2 (VW standard VW 39 D 920) This data is directly from the CDM1 series dimension tables, which show the rod end threads for different piston and rod diameters . 🧭 How to Find the Exact "CAM50" Pin Set The CAM designation typically identifies a specific mounting block (clevis or fork bracket) within the CDM1 accessory range . The required pin set is the accessory that matches this specific mounting block . To find the exact part number for your pin set, you should consult the official Bosch Rexroth CDM1 / CGM1 / CSM1 catalog (RE 17329). The dedicated "Accessories" section, found on pages 46 to 54 of the catalog, lists all mounting components, including pins, and pairs them with the correct cylinder sizes and rod ends . The table shows that fork-type mounting blocks and their associated pins are assigned based on the piston rod end type (G or H) .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (21)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)