Rexroth - Bosch Accessories - pin set CAM16 Pin Set. -Bolt Diameter EK=16mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=18 Or Piston Rod End H With D=32 mm And d=22 mm

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - pin set CAM16 Pin Set. -Bolt Diameter EK=16mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=18 Or Piston Rod End H With D=32 mm And d=22 mm
Configuration Name:
Part Number:
CAM_16
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CAM_16
Name:Rexroth - Bosch Accessories - pin set CAM16 Pin Set. -Bolt Diameter EK=16mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=18 Or Piston Rod End H With D=32 mm And d=22 mm
Description:A specific "CAM16 Pin Set" part number could not be found in the available Bosch Rexroth documentation for the CDM1 cylinder series. However, the technical data confirms the exact piston rod threads and compatibility details you need for this configuration. 📋 Configuration Compatibility for CDM1 Based on the Rexroth CDM1 series technical data, here are the confirmed specifications for the rod ends you mentioned : Specification Piston Rod End "G" (d=18 mm) Piston Rod End "H" (D=32 mm, d=22 mm) Piston Diameter (ØAL) 32 mm 32 mm Piston Rod Diameter (ØMM) 18 mm 22 mm Rod Thread (KK) M14 x 1.5 (ISO 6020/1) M16 x 1.5 (VW 39 D 920) Swivel Head Compatibility CGKD swivel head, thread type "G" CGKD swivel head, thread type "H" 🔍 Note on "CAM" Designation: The "CAM" prefix is not a standard Rexroth code for mounting pins in the available documentation. The correct term in the catalog for the pin set is simply "Pin" . A "CAM16" pin set would likely be the accessory for a CAM series mounting block used with this cylinder.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (20)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)