Rexroth - Bosch Accessories - pin set CAM12 Pin Set. -Bolt Diameter EK=12mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=14 Or Piston Rod End H With D=25 mm And d=18 mm

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - pin set CAM12 Pin Set. -Bolt Diameter EK=12mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=14 Or Piston Rod End H With D=25 mm And d=18 mm
Configuration Name:
Part Number:
CAM_12
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CAM_12
Name:Rexroth - Bosch Accessories - pin set CAM12 Pin Set. -Bolt Diameter EK=12mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=14 Or Piston Rod End H With D=25 mm And d=18 mm
Description:The specific "CAM12 Pin Set" you are looking for is not documented as a standalone item in the available Rexroth literature. However, based on the official documentation for the CDM1 cylinder series and the "CAM" designation, this likely refers to the mounting pin set for a specific mounting block. I can confirm the compatibility details for a CDM1 cylinder with a 12 mm pin diameter, which depends on the piston rod end type you specified. 📋 Compatibility for CAM12 Pin Set For a CDM1 cylinder with a 12 mm pin diameter, the documentation confirms the following compatibility with your specified piston rod ends: Piston Rod Diameter 14 mm: The standard piston rod thread for a 14 mm rod is M10 x 1.25, as documented for the CDM1 series . This is compatible with the specified "G" piston rod end . Piston Rod Diameter 18 mm: The standard piston rod thread for an 18 mm rod is M14 x 1.5, as documented for the CDM1 series . This is compatible with the specified "H" piston rod end (VW standard thread) . The table below summarizes the key data: Parameter Specification Accessory Type Pin Set (Mounting Block Accessory) Rexroth Designation CAM12 (Based on naming convention) Pin Diameter (EK) 12 mm For Cylinder Series CDM1 (Mill Type Cylinder) For Piston Rod End "G" Piston Rod Ø 14 mm, Thread M10 x 1.25 For Piston Rod End "H" Piston Rod Ø 18 mm, Thread M14 x 1.5 ⚠️ Note on the "CAM" Designation: The "CAM" prefix is not a standard Rexroth code for pins in the documentation I can access. This designation is most likely associated with a specific mounting block (e.g., a CAM clevis bracket) for which this pin set is the required accessory. To confirm the exact part number, you should verify the specific mounting block model you are using.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (20)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)