FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to block - RVCMLJN

Supplier:
User Library
Model Name:
FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to block - RVCMLJN
Configuration Name:
Part Number:
RVCMLJN
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: September 02,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: RVCMLJN
Name:FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to block - RVCMLJN
Description:This FLeX Series solenoid-operated, 2-stage, balanced relief cartridge is a pressure regulating valve. The valve is normally in relief mode. In relief mode, the valve is open to tank (port 2), throttling flow to regulate the pressure when the pressure at the inlet (port 1) reaches the valve setting. The setting is adjustable with an adjust screw. Energizing the solenoid blocks pilot flow. The valve blocks the flow path from inlet (port 1) to tank (port 2) similar to a spool-type directional valve. Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals. Designed and tested to 10-million operational cycles at full-rated pressure. Exceeds new NFPA test standard T2.6.1 R2014 for fatigue and burst pressure ratings. Higher flow rates than competing valves of similar size. All configurations of this valve include zinc-nickel plating as standard for 1000-hour salt fog protection. Coil connector options offer ratings up to IP69K. See individual coil product pages for details. This cartridge utilizes both 740 Series high-power and 747 Series hazardous location coils. Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio. Main stage orifice is protected by a 150-micron stainless steel screen. Will accept maximum pressure at port 2. All configurations of this valve are assembled with a non-removable adjust screw. FLeX Series relief valves are fully compatible with the XMD Expandable Mobile Drivers from Sun. A FULL DATA SHEET is available for this model using the link at the top of the page. A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section. Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining vari
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (44)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)