Tie Rod Type Cylinder CD (BOSCH , Rexroth) Range T3 to ISO 6022/2 , DIN 24554. - CDT3 MT2. - Bore Diameter D=160 mm. - With Stroke Length S=200 mm.

Supplier:
User Library
Model Name:
Tie Rod Type Cylinder CD (BOSCH , Rexroth) Range T3 to ISO 6022/2 , DIN 24554. - CDT3 MT2. - Bore Diameter D=160 mm. - With Stroke Length S=200 mm.
Configuration Name:
Part Number:
CDT3MT2-160-110-200
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: September 03,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CDT3MT2-160-110-200
Name:Tie Rod Type Cylinder CD (BOSCH , Rexroth) Range T3 to ISO 6022/2 , DIN 24554. - CDT3 MT2. - Bore Diameter D=160 mm. - With Stroke Length S=200 mm.
Description:Based on the Rexroth technical documentation, here are the details for your CDT3-MT2 tie-rod cylinder configuration with a 160mm bore and 200mm stroke, along with hashtags. 🔧 Key Specifications: CDT3-MT2, 160mm Bore, 200mm Stroke The CDT3 is a single-rod tie-rod hydraulic cylinder with a nominal pressure of 160 bar (maximum 210 bar for static loads) and conforms to standards ISO 6020-2 and DIN 24554 . The MT2 mounting style designates a trunnion mount at the cylinder base, allowing the cylinder to pivot around a fixed axis at its rear end . Parameter Specification for CDT3-MT2 (160mm Bore) Series CD – Single-rod hydraulic cylinder, T3 Style Mounting Type MT2 – Trunnion at cylinder base Nominal Pressure 160 bar (16 MPa) Maximum Operating Pressure 210 bar (21 MPa) Standards ISO 6020-2, DIN 24554 Piston Diameter (ØAL) 160 mm Piston Rod Diameter (ØMM) For a 160mm bore, standard options include a range of sizes; typical rods like 70 mm or 90 mm are available Stroke Length (S) 200 mm (Maximum up to 3000 mm) ⚙️ Mounting Details and Ordering Notes Trunnion Mounting: The MT2 style allows the cylinder to pivot at its base, helping to compensate for misalignments in the application and reduce side loads on the piston rod and seals . Trunnion mounting blocks (CLTA series) are available as accessories for specific build sizes . Trunnion Position: The trunnion position is freely selectable. When ordering, the "XV" dimension (the trunnion position from the cylinder base) must always be specified in the plain text in mm . Line Connection: For piston diameters from 125 to 200 mm with this series, only line connection "B" is possible . Ordering Code Reference: The Rexroth ordering code for your cylinder follows the structure: text CDT3MT2/160/[Rod Diameter in mm]/200... You would need to specify the piston rod diameter (e.g., 70 or 90 mm) and options like cushioning or seals to complete the order code .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (28)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)