ROTO

Road gullies of diameter DN400, DN500, DN600, DN800 and DN1000 are made of nature friendly material polyethylene which can be 100% recycled after use. Sand traps are used for separating the water from sand and dust, collected from the roof, before it flows into the tank or manhole.

ROTO

With RoSeptic 3 chamber tanks, we collect fecal waste water from the households of the facilities where the public sewerage is not regulated.Their use is sensible and practical especially for households with one or two population units or for holiday facilities where there is no permanent inflow.The recommended volume of the septic tanks is 1500 L per person.Waste water of the non-flowing septic tank must be emptied regularly. Discharge of municipal waste water takes place through an opening at the top.With the correct installation a septic tank is also suitable for installations under traffic loads.

ROTO

With RoSeptic tanks, we collect fecal waste water from the households of the facilities where the public sewerage is not regulated.Their use is sensible and practical especially for households with one or two population units or for holiday facilities where there is no permanent inflow.The recommended volume of the septic tanks is 1500 L per person.Waste water of the non-flowing septic tank must be emptied regularly. Discharge of municipal waste water takes place through an opening at the top.With the correct installation a septic tank is also suitable for installations under traffic loads.

ROTO

The biological wastewater treatment plant RoEco 3 PE is intended for cleaning wastewater from households. The reservoir of the plant is made of polyethylene (PE) and is distinguished for its excellent statics and load capacity. Vertical shape and dimensions of the reservoir enables installation of the WWTP on small surface.The RoEco treatment plant operates on the basis of the flow technology of wastewater treatment. Water from households flows into the first sedimentary chamber. Across the opening at the bottom of the chamber drains into the aeration part of the plant. In the aeration chamber, through the tube diffusers, air is supplied which, in the form of bubbles rise to the water level. The water then flows over the overflow knee into the third post sedimentary chamber, where the mammuth pump is installed which returns sludge back to the first chamber.The WWTP RoEco has been tested in accordance with standard SIST EN 12566 – 3.

ROTO

Roterra water tanks are used for the purpose of collecting rainwater for domestic use.They are made of polyethylene and offers 100 % waterproofing.Roterra tank has a telescopic extension Φ 600 x 300 mm, which allows simple adjustment to te terrain height. On the top of the water tank, a polyethylene cover, suitable for loads up to 200 kg, is installed.A different diameter of inlet and outlet pipes can be arranged on the reservoir.The shape and dimensions of the Rottera tanks, make it easy to manipulate on the construction site.The tank has been tested in accordance with standard SIST EN 12566 – 3.

ROTO

RoDrive Tanks are suitable for various purposes and aplications. Their uses include fire water tanks, containments, water reservoirs and more.They are characterized by excellent statics, which enables the installation of the tank on traffic surfaces up to load class C250 or axle load up to 25 t/m2.

ROTO

The biological wastewater treatment plant EcoBox 6 - 9 PU is intended for cleaning wastewater from households. The tank of the WWTP is made of polyethylene (PE) and is distinguished by its excellent statics and load capacity, which enables deep underground installation and good durability even in high ground waters and under traffic loads.The EcoBox wastewater treatment plant works safely and reliably, and is almost inaudable, without odour and is insensitive to temperature fluctuations in the environment.The high efficiency of cleaning, easy management and the adaptation of the WWTP to the need of users is ensured by the SBR technology.