Based on the Bosch Rexroth technical documentation, the CST3 - MS2 is a tie-rod hydraulic cylinder with an integrated position measuring system. Your specified configuration has a 50 mm bore and a 50 mm stroke.📋 Key SpecificationsA critical design consideration for a cylinder is the maximum permissible stroke length to avoid piston rod buckling. For the CST3 series with a 50 mm bore and MS2 foot mounting, your requested 50 mm stroke is well within the safe operating limits.Piston Diameter (ØAL) Piston Rod Diameter (ØMM) Max. Admissible Stroke (mm) at 160 bar50 mm 28 mm 895 - 945 50 mm 36 mm 1200 🔧 Ordering Code StructureBased on the Rexroth ordering code for this series, your cylinder can be configured as follows:Series: CST3 (Differential cylinder with position measurement system)Mounting Type: MS2 (Foot mounting)Piston Diameter: 50 (50 mm)Piston Rod Diameter: 28 or 36 (select based on your required stroke length and force)Stroke Length: 50 (50 mm)A complete ordering code example would be structured as: CST3MS2/50/28/50... or CST3MS2/50/36/50... .

Tie Rod Cylinder With Position Measuring Systems CST3 - MX5.

Based on the available search results, the specifications for a CST3 - MX5 tie rod cylinder are defined, and a 50mm bore with a 50mm stroke is a standard and safe configuration . The position measuring system uses magnetostrictive technology for precise, contact-free position feedback .📋 Key Specifications & DataThe following table summarizes the key technical data for your cylinder configuration:Parameter Specification SourceType CST3 - MX5 Mounting Style MX5 (Tapped hole at head) Bore Diameter (ØAL) 50 mm Stroke Length (S) 50 mm Max. Available Stroke 1200 mm Max. Admissible Stroke @160 bar 920 - 1200 mm The MX5 mounting type provides a rigid, fixed mounting point via a threaded bore at the cylinder head, suitable for applications requiring stable, non-pivoting installation . An example of the ordering code for this configuration would be CST3MX5/50/XX/50..., where XX is the chosen piston rod diameter .

Based on the official Bosch Rexroth technical documentation, here are the specifications for the CST3 - MT4 tie-rod cylinder with a 50 mm bore and a 50 mm stroke.📋 Key Specifications for CST3 MT4 (50mm Bore)The CST3 series is a tie-rod hydraulic cylinder with a nominal pressure of 160 bar, designed with an integrated position measuring system. The MT4 designation in the ordering code indicates a center trunnion mounting style, allowing the cylinder to pivot on a central axis.For your specified 50 mm bore, the standard piston rod diameter options are 28 mm or 36 mm. The table below shows the key technical data, including the permissible stroke length to avoid piston rod buckling.Parameter Specification for 50mm Bore / MT4 MountingPiston Diameter (ØAL) 50 mmPiston Rod Diameter (ØMM) 28 mm or 36 mmMounting Style MT4 (Center trunnion)Max. Admissible Stroke @160 bar 920 - 1200 mm (your 50 mm stroke is safe)Port Thread (EE) G 1/2Piston Rod Thread (KK) M20 x 1.5 (for 28mm rod) or M27 x 2 (for 36mm rod)Trunnion Diameter (ØQTD f8) 25 mm🔧 Ordering Code StructureBased on the Rexroth ordering system for the CST3 series, the cylinder can be configured as follows:Series: CST3 (Differential cylinder with position measurement system)Mounting Type: MT4 (Center trunnion)Piston Diameter: 50 (50 mm)Piston Rod Diameter: 28 or 36 (choose based on application requirements)Stroke Length: 50 (50 mm)A complete ordering code example would be structured as: CST3MT4/50/28/50... or CST3MT4/50/36/50....

Based on the official Bosch Rexroth technical documentation, here are the specifications for the CST3 - MP5 tie-rod cylinder with a 63 mm bore and a 50 mm stroke.📋 Key Specifications for CST3 MP5 (63mm Bore)The CST3 series is a tie-rod hydraulic cylinder with an integrated position measuring system, designed for a nominal pressure of 160 bar . The MP5 designation indicates a self-aligning clevis (swivel eye) at the cylinder base mount, which allows the cylinder to pivot and compensates for minor angular misalignments .For your specified 63 mm bore, your 50 mm stroke is well within the maximum permissible stroke length and safe operating limits. Here is a summary of the key technical data:Parameter SpecificationSeries CST3...Z (Tie Rod Cylinder with Position Measuring System) Mounting Type MP5 (Self-aligning clevis at base) Nominal Pressure 160 bar Piston Diameter (ØAL) 63 mmStroke Length (S) 50 mmMax. Admissible Stroke @160 bar 1700 mm (with 36mm rod) / 1050 mm (with 45mm rod) Port Thread (EE) G 1/2 🔧 Ordering Code StructureBased on the Rexroth ordering system for the CST3 series, your cylinder can be configured as follows :Series: CST3 (Differential cylinder with position measurement system)Mounting Type: MP5 (Self-aligning clevis at base)Piston Diameter: 63Piston Rod Diameter: 36 or 45 (standard options for 63mm bore)Stroke Length: 50A complete ordering code example would be structured as: CST3MP5/63/36/50... or CST3MP5/63/45/50....

Based on the official Rexroth documentation, the correct self-aligning clevis (swivel head) for your specified cylinder configurations is the CGAS 30. This component is designed to attach to the piston rod, allowing for angular misalignment .The "CGAS" is a clampable swivel head, and the "30" in the name refers to the size of the clevis, not the pin diameter.📊 CGAS 30 SpecificationsHere is a summary of its key specifications from the official Rexroth catalog :Parameter SpecificationType CGAS 30For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 50 mm, CDH3/CGH3/CSH3: 40 mmMaterial No. (Maintenance-required) R900303138 Material No. (Maintenance-free) R900321696 Material No. (Flat Grease Nipple) R900321627 Length L1 (max.) 109 mm Length LF (min.) 30 mm Clamping Screw ISO 4762 - M8 Tightening Torque (MA) 30 Nm Weight (m) 1.0 kg Static Load Rating (C₀) 122 kN Max. Admissible Load (Fadm) 40.3 kN Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .

Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 35.

The correct self-aligning clevis for your specified Rexroth cylinder configurations is the CGAS 35. This component is designed to attach to the piston rod and allow for angular misalignment . The "CGAS" designation indicates a clampable swivel head, and the "35" refers to the clevis size.Here is a summary of its key specifications from the official Rexroth catalog:Parameter SpecificationType CGAS 35 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 63 mmCDH3/CGH3/CSH3: 50 mm Material No. (Maintenance-required) R900303139 Material No. (Maintenance-free) R900322716 Material No. (Flat Grease Nipple) R900840595 Length L1 (max.) 132 mm Length LF (min.) 40 mm Clamping Screw ISO 4762 - M10 Tightening Torque (MA) 59 Nm Weight (m) 1.5 kg Static Load Rating (C₀) 177 kN Max. Admissible Load (Fadm) 58.4 kN

The correct self-aligning clevis for your specified Rexroth cylinder configurations is the CGAS 40.This component is a clampable swivel head (Gelenkkopf) designed to attach to the piston rod and compensate for angular misalignment . The size "40" refers to the clevis size, which matches the piston diameters you specified .📊 CGAS 40 SpecificationsHere is a summary of its key specifications based on the official Rexroth catalog data :Parameter SpecificationType CGAS 40For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 80 mmCDH3/CGH3/CSH3: 63 mmMaterial No. (Maintenance-required) R900303140Material No. (Maintenance-free) R900321665Material No. (Flat Grease Nipple) R900321650Thread (KK) M39 x 3Pin Diameter (ØCN) 40 mmLength L1 (max.) 155 mmLength LF (min.) 44 mmClamping Screw ISO 4762 - M12Tightening Torque (MA) 100 NmWeight (m) 2.4 kgStatic Load Rating (C₀) 287 kNMax. Admissible Load (Fadm) 94.7 kNInstallation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .

Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 50.

The correct self-aligning clevis (swivel head) for your specified Rexroth cylinders is the CGAS 50.For a CDH1 cylinder with a 100 mm piston or a CDH3 cylinder with an 80 mm piston, the CGAS 50 is the recommended accessory. Here are the key specifications from the official documentation.CGAS 50 SpecificationsParameter Specification for CGAS 50For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 100 mm CDH3/CGH3/CSH3: 80 mm Material No. (Maintenance-required) R900303141 Material No. (Maintenance-free) R900322017 Material No. (Flat Grease Nipple) R900321885 Length L1 (max.) 198 mm Length LF (min.) 55 mm Clamping Screw M12 (ISO 4762-10.9) Tightening Torque (MA) 100 Nm Static Load Rating (C₀) 422 kN Max. Admissible Load (Fadm) 139.3 kN Thread (KK) M50 x 3 Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .

Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 60.

Based on the official Rexroth documentation, the correct self-aligning clevis for your specified cylinder configurations is the CGAS 60. This clampable swivel head is designed to attach to the piston rod and compensate for angular misalignment.The size 60 corresponds to the clevis size required for a CDH1 cylinder with a 125 mm piston or a CDH3 cylinder with a 100 mm piston.📊 CGAS 60 SpecificationsParameter SpecificationFor Cylinder (Piston Ø) CDH1/CGH1/CSH1: 125 mmCDH3/CGH3/CSH3: 100 mmMaterial No. (Maintenance-required) R900300731Material No. (Flat Grease Nipple) R900322734📌 Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.

Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 70.

The correct self-aligning clevis (swivel head) for your specified Rexroth cylinders is the CGAS 70.This clampable swivel head is documented as an accessory for the specified CDH1 and CDH3 series cylinders . The size 70 corresponds to the clevis size required for a CDH1 cylinder with a 140 mm piston or a CDH3 cylinder with a 125 mm piston .📊 CGAS 70 SpecificationsParameter SpecificationFor Cylinder (Piston Ø) CDH1/CGH1/CSH1: 140 mmCDH3/CGH3/CSH3: 125 mm Length L1 (max.) 279 mm Length LF (min.) 75 mm Angle of Misalignment 6° Clamping Screw M16 Tightening Torque (MA) 250 Nm Weight (m) 12.2 kg 📌 Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.