Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 80.

The correct self-aligning clevis for a CDH1 cylinder with a 160 mm piston or a CDH3 cylinder with a 140 mm piston is the CGAK 80.This swivel head is detailed in the Rexroth technical documentation for mounting elements, which provides specifications for both the CDH1/CGH1/CSH1 and CDH3/CGH3/CSH3 series.📊 CGAK 80 SpecificationsParameter Specification for CGAK 80For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 160 mmCDH3/CGH3/CSH3: 140 mmMaterial No. (Maintenance-required) R900303169Material No. (Alternative) R900327370 (CGKA 80 KPL.)Thread (KK) M80 x 2Pin Diameter (ØCN) 80 mmLength (L1) 265 mmClamping Screw ISO 4762 - M20Tightening Torque (MA) 490 NmWeight (m) 12.2 kgStatic Load Rating (C₀) 670 kNMax. Admissible Load (Fadm) 241.2 kNAngle of Misalignment (Z) 6°⚠️ Installation Note: The self-aligning clevis must always be screwed against the piston rod thread stop. Afterwards, the clamping screws must be tightened with the specified tightening torque.

Based on the official Rexroth technical documentation, the correct clampable swivel head for your specified cylinder configurations is the CGAK 100 .The technical data from the catalog clearly lists this model as the accessory for the CDH1/CGH1/CSH1 series with a piston diameter (ØAL) of 180 mm, and the CDH3/CGH3/CSH3 series with a piston diameter of 160 mm .📊 CGAK 100 SpecificationsHere is a summary of its key specifications from the Rexroth technical data :Parameter Specification for CGAK 100For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 180 mmCDH3/CGH3/CSH3: 160 mm Material No. (Standard) R900303133 (for CDH1) R900312165 (for CDH3) Thread (KK) M100 x 2 Length (L1) 323 mm Weight (m) 21.5 kg Static Load Rating (C₀) 980 kN Max. Admissible Load (Fadm) 352.8 kN Clamping Screw ISO 4762 - M20 Tightening Torque (MA) 490 Nm Angle of Misalignment (Z) 5° ⚠️ Installation Note: The self-aligning clevis must always be screwed against the piston rod shoulder. Afterwards, the clamping screws must be tightened with the specified tightening torque .

Based on the official Bosch Rexroth technical documentation, the correct clampable swivel head for your specified cylinder configurations is the CGAK 110.The CGAK 110 is designed for the CDH1/CGH1/CSH1 series with a piston diameter (ØAL) of 200 mm, and the CDH3/CGH3/CSH3 series with a piston diameter of 180 mm.📊 CGAK 110 SpecificationsHere is a summary of its key specifications from the Rexroth technical data:Parameter Specification for CGAK 110For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 200 mmCDH3/CGH3/CSH3: 180 mmMaterial No. (Standard) R900303167 (for CDH1)R900321691 (for CDH3)Thread (KK) M110 x 2Pin Diameter (ØCN) 100 mmLength (L1) 360 mmWeight (m) 27.5 kgStatic Load Rating (C₀) 1120 kNMax. Admissible Load (Fadm) 403.2 kNClamping Screw ISO 4762 - M24Tightening Torque (MA) 840 NmAngle of Misalignment (Z) 7°⚠️ Installation Note: The self-aligning clevis must always be screwed against the piston rod shoulder. Afterwards, the clamping screws must be tightened with the specified tightening torque.

Based on the official Bosch Rexroth technical documentation for the CDH1/CGH1/CSH1 series, the correct clampable swivel head for the piston diameters you specified is the CGAK 120.📊 CGAK 120 SpecificationsThe technical data from the catalog clearly lists the CGAK 120 for both the CDH1 series with piston diameters (ØAL) of 220 mm and 250 mm , and the CDH3 series with piston diameters of 200 mm and 220 mm. The data is consistent across the CDH1 and CDH3 series documentation.Here is a summary of its key specifications from the Rexroth technical data:Parameter Specification for CGAK 120For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 220 mm, 250 mmCDH3/CGH3/CSH3: 200 mm, 220 mm Material No. (Maintenance-required) R900321621 (for CDH1) Material No. (Variant) R900323333 Thread (KK) M120 x 3 Pin Diameter (CN) 110 mm Length (L1) 407.5 mm Weight (m) 40.7 kg Static Load Rating (C₀) 1700 kN Max. Admissible Load (Fadm) 612.0 kN Angle of Misalignment (Z) 6° ⚠️ Installation Note: The self-aligning clevis must always be screwed against the piston rod shoulder. Afterwards, the clamping screws must be tightened with the specified tightening torque. A variant with flat grease nipple (R900321522) is also available .

Based on the official Bosch Rexroth documentation for the CDH1/CGH1/CSH1 and CDH3/CGH3/CSH3 series, the correct clampable swivel head for your specified cylinder configurations is the CGAK 130.The technical data clearly lists the CGAK 130 for both the CDH1 series with piston diameters (ØAL) of 280 mm and the CDH3 series with piston diameters of 250 mm.📊 CGAK 130 SpecificationsHere is a summary of its key specifications from the Rexroth technical data:Parameter Specification for CGAK 130For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 280 mmCDH3/CGH3/CSH3: 250 mmMaterial No. (Maintenance-required) R900322015Material No. (Maintenance-free) R900540850Thread (KK) M130 x 3Pin Diameter (ØCN) 120 mmLength (L1) 490 mmStatic Load Rating (C₀) 2900 kNMax. Admissible Load (Fadm) 1044.0 kNClamping Screw ISO 4762 - M24Tightening Torque (MA) 840 NmWeight (m) 76.4 kg⚠️ Installation Note: The self-aligning clevis must always be screwed against the piston rod shoulder. Afterwards, the clamping screws must be tightened with the specified tightening torque.

Based on the official Bosch Rexroth technical documentation for the CGH2 mill-type cylinder series, here are the specifications for a double rod cylinder (CG) with MF3 mounting, a 50 mm bore, and a 75 mm stroke .📊 Key Specifications for CGH2 MF3 (50mm Bore, 75mm Stroke)The Rexroth CGH2 is a robust mill-type cylinder designed for heavy-duty applications. It meets ISO 6022 and DIN 24333 standards and has a nominal pressure of 250 bar (25 MPa) .Mounting Style: MF3 defines a round flange at the cylinder head .Piston Diameter (ØAL): 50 mm.Stroke Length (S): 75 mm (Maximum stroke up to 6000 mm is available for this series) .Piston Rod Diameter (ØMM): For a 50 mm bore, the standard options are 32 mm or 36 mm .Port Thread (EE): G1/2 .⚙️ Ordering Code ReferenceThe technical documentation provides the ordering code structure, which follows this format for your cylinder :CGH2MF3/50//75...A complete order code example would be structured as:CGH2MF3/50/32/75... (for a 32 mm rod)CGH2MF3/50/36/75... (for a 36 mm rod)

Based on the official Bosch Rexroth technical documentation, here are the specifications for the CGH2 MS2 double rod, mill-type cylinder with a 50 mm bore and a 75 mm stroke.The CGH2 is a robust cylinder series designed for a nominal pressure of 250 bar (25 MPa) and conforms to DIN 24333 and ISO 6022 standards . The MS2 designation specifies a foot mounting style . For your specified 50 mm bore, the standard piston rod diameter options are 32 mm or 36 mm .📊 Key Specifications & Dimensions for CGH2 MS2 (50mm Bore)The following table summarizes critical data from the official Rexroth catalog :Parameter Value for 50 mm Bore / MS2 MountingPiston Diameter (ØAL) 50 mmPiston Rod Diameter (ØMM) 32 mm or 36 mmMounting Style MS2 (Foot mounting)Stroke Length (S) 75 mm (Maximum up to 6000 mm possible) Port Thread (EE) G1/2 Piston Rod Thread (KK) M27 x 2 ⚙️ Weight & Force DataThe total weight of the cylinder depends on the selected piston rod diameter. Weight data and forces at the nominal pressure of 250 bar are provided below :Weight Calculation:Base Weight (0 mm stroke): 14 kg (for MS2 mounting) .Additional Weight per 100 mm Stroke: 1.9 kg (32 mm rod) or 2.3 kg (36 mm rod) .Calculated Weight (75 mm stroke):With a 32 mm rod: 14 kg + (0.75 × 1.9 kg) = 15.43 kg.With a 36 mm rod: 14 kg + (0.75 × 2.3 kg) = 15.73 kg.Force Data (at 250 bar):Force on Piston Side (F1): 49.10 kN .Force on Rod Side (F3 - pulling): 28.98 kN (32 mm rod) or 23.65 kN (36 mm rod) .

Based on the Bosch Rexroth technical documentation, here are the specifications for the CGH2 MT4 double rod, mill-type cylinder with a 50 mm bore and a 75 mm stroke.📊 Key Specifications for CGH2 MT4 (50mm Bore, 75mm Stroke)The CGH2 series is designed for a nominal pressure of 250 bar (25 MPa) and conforms to DIN 24333 and ISO 6022 standards . The MT4 designation specifies a trunnion (pivot) mount .For a 50 mm bore, the standard piston rod diameter options are 32 mm or 36 mm .Parameter Value for 50 mm Bore / MT4 MountingPiston Diameter (ØAL) 50 mmPiston Rod Diameter (ØMM) 32 mm or 36 mmMounting Style MT4 (Trunnion mount)Stroke Length (S) 75 mm (Maximum up to 6000 mm possible) Port Thread (EE) G1/2 Piston Rod Thread (KK) M27 x 2 Trunnion Diameter (OTD) 32 mm Trunnion Length (TL) 25 mm ⚙️ Weight & Force DataThe total weight depends on the piston rod diameter. Weight data and forces at the nominal pressure of 250 bar are provided below :Weight Calculation:Base Weight (0 mm stroke): 13 kg (for MT4 mounting) .Additional Weight per 100 mm Stroke: 1.9 kg (32 mm rod) or 2.3 kg (36 mm rod) .Calculated Weight (75 mm stroke):With a 32 mm rod: 13 kg + (0.75 × 1.9 kg) = 14.43 kg.With a 36 mm rod: 13 kg + (0.75 × 2.3 kg) = 14.73 kg.Force Data (at 250 bar):Force on Piston Side (F1): 49.10 kN .Force on Rod Side (F3 - pulling): 28.98 kN (32 mm rod) or 23.65 kN (36 mm rod) .🔧 Trunnion Mounting AccessoryThe MT4 mounting style uses CLTB (trunnion bearing block) accessories, which are sold in pairs. For a 50 mm bore cylinder, the correct bearing block is the CLTB 32 .

Rexroth - BOSCH - Tie Rod Cylinder To CNOMO - Single Rod Cylinder Range HVBS , 02.

For the Rexroth - BOSCH - Tie Rod Cylinder To CNOMO - Single Rod Cylinder Range HVBS, 02, the stroke length code A3 is not a standard option in the official documentation. The standard stroke code for a 5mm length is A.The HVBS type designates a single rod differential cylinder . The code 02 specifies your requested 25 mm piston and 16 mm rod diameters .Based on the official Bosch Rexroth ordering code table, the standard stroke designations are as follows :Stroke Length Code5 mm A10 mm B16 mm C25 mm D40 mm E63 mm F100 mm G160 mm HThe A3 code you used is not listed and likely refers to a specific variant of the mounting type or a custom non-standard stroke option .A complete ordering code example would be: HVBS 02 A 1 V (where 1 is the basic mounting type and V is the standard seal option) .

Rexroth - BOSCH - Tie Rod Cylinder To CNOMO - Single Rod Cylinder Range HVBS , 02.

For the Rexroth - BOSCH - Tie Rod Cylinder To CNOMO - Single Rod Cylinder Range HVBS, 02, the stroke length code A3 is not a standard option in the official documentation. The standard stroke code for a 5mm length is A.The HVBS type designates a single rod differential cylinder . The code 02 specifies your requested 25 mm piston and 16 mm rod diameters .Based on the official Bosch Rexroth ordering code table, the standard stroke designations are as follows :Stroke Length Code5 mm A10 mm B16 mm C25 mm D40 mm E63 mm F100 mm G160 mm HThe A3 code you used is not listed and likely refers to a specific variant of the mounting type or a custom non-standard stroke option .A complete ordering code example would be: HVBS 02 A 1 V (where 1 is the basic mounting type and V is the standard seal option) .