Based on the official Bosch Rexroth technical documentation, the correct fork clevis for your CDH2 cylinder with a 100mm piston diameter is the CCKB 63. The "Size 63" in the model name refers to the diameter of the required mounting pin (Pin Diameter CK H9).📊 CCKB 63 Specifications for CDH2 (100mm Piston)The table below lists the key specifications and dimensions for the CCKB 63 from the official Rexroth data sheet:Parameter Specification for CCKB 63Type CCKB 63Material Number R900542849 Nominal Force 200,000 N For Cylinder (Piston Ø) CDH2/CGH2/CSH2: 100 mm Pin Diameter (CK H9) 63 mm Thread (KK 6H) M48 x 2 Weight (approx.) 21.5 kg Clamping Screw M24 x 80 (ISO 4762-10.9) Tightening Torque (MA) 730 Nm Important Installation Note: The fork clevis must always be screwed against the piston rod thread stop. Afterwards, the clamping screws must be tightened with the specified tightening torque. The associated pin (63 mm diameter, tolerance m6) is included in the scope of supply but is not mounted in the factory.

Based on the official Bosch Rexroth technical documentation for the CDH2 series, the correct fork clevis for a 125 mm piston diameter is the CCKB 80 . The "Size 80" refers to the diameter of the required mounting pin.📊 CCKB 80 Specifications for CDH2 (125mm Piston)The table below lists the key specifications and dimensions for the CCKB 80, as detailed in the official Rexroth data sheets .Parameter Specification for CCKB 80Type CCKB 80Material Number R900542850 Nominal Force 320,000 N For Cylinder (Piston Ø) CDH2/CGH2/CSH2: 125 mm Pin Diameter (CK H9) 80 mm Thread (KK 6H) M64 x 3 Weight (approx.) 38.2 kg Clamping Screw M30 x 100 (ISO 4762-10.9) Tightening Torque (MA) 1450 Nm Important Installation Note: The fork clevis must always be screwed against the piston rod thread stop. Afterwards, the clamping screws must be tightened with the specified tightening torque . The associated pin (80 mm diameter, tolerance m6) is included in the scope of supply but is not mounted in the factory .

Based on the official Bosch Rexroth documentation, the cylinder you are looking for can be identified with the following specifications.📊 Technical IdentificationThe HVBD type designates a differential cylinder with a piston rod for positioning (a sensor rod) .Component of Ordering Code Value / Code SignificanceType HVBD Differential cylinder with sensor rod Range / Piston Ø / Rod Ø 02 Piston diameter 25 mm / Rod diameter 16 mm Stroke Code A1 Code for a 5 mm stroke length (standard code is A)Note on A1: The official Rexroth ordering code table lists the standard code for a 5 mm stroke length simply as A . The A1 variant is not defined in the standard document. It is possible this denotes a specific mounting style or a custom variant.📋 Key Technical SpecificationsThe HVB series cylinders are designed to CNOMO standards with robust tie-rod construction .Parameter SpecificationNominal Pressure 200 bar Standards CNOMO 05.07.65 to 05.07.70 Piston Ø Range 25 to 125 mm Sensor Rod Included (HVBD type) A complete ordering code example for the standard variant would be: HVBD 02 A ... . For confirmation of the A1 variant, consulting the official Bosch Rexroth document RE 17047/11.03 or contacting them directly is recommended.

Based on the official Bosch Rexroth documentation, the cylinder you are looking for can be identified with the following specifications.📊 Technical IdentificationThe HVBD type designates a differential cylinder with a piston rod for positioning (a sensor rod) .Component of Ordering Code Value / Code SignificanceType HVBD Differential cylinder with sensor rod Range / Piston Ø / Rod Ø 02 Piston diameter 25 mm / Rod diameter 16 mm Stroke Code A1 Code for a 5 mm stroke length (standard code is A)Note on A1: The official Rexroth ordering code table lists the standard code for a 5 mm stroke length simply as A . The A1 variant is not defined in the standard document. It is possible this denotes a specific mounting style or a custom variant.📋 Key Technical SpecificationsThe HVB series cylinders are designed to CNOMO standards with robust tie-rod construction .Parameter SpecificationNominal Pressure 200 bar Standards CNOMO 05.07.65 to 05.07.70 Piston Ø Range 25 to 125 mm Sensor Rod Included (HVBD type) A complete ordering code example for the standard variant would be: HVBD 02 A ... . For confirmation of the A1 variant, consulting the official Bosch Rexroth document RE 17047/11.03 or contacting them directly is recommended.

Based on the official Bosch Rexroth documentation, the cylinder you are looking for can be identified with the following specifications.📊 Technical IdentificationThe HVBD type designates a differential cylinder with a piston rod for positioning (a sensor rod) .Component of Ordering Code Value / Code SignificanceType HVBD Differential cylinder with sensor rod Range / Piston Ø / Rod Ø 02 Piston diameter 25 mm / Rod diameter 16 mm Stroke Code A1 Code for a 5 mm stroke length (standard code is A)Note on A1: The official Rexroth ordering code table lists the standard code for a 5 mm stroke length simply as A . The A1 variant is not defined in the standard document. It is possible this denotes a specific mounting style or a custom variant.📋 Key Technical SpecificationsThe HVB series cylinders are designed to CNOMO standards with robust tie-rod construction .Parameter SpecificationNominal Pressure 200 bar Standards CNOMO 05.07.65 to 05.07.70 Piston Ø Range 25 to 125 mm Sensor Rod Included (HVBD type) A complete ordering code example for the standard variant would be: HVBD 02 A ... . For confirmation of the A1 variant, consulting the official Bosch Rexroth document RE 17047/11.03 or contacting them directly is recommended.

Based on the official Bosch Rexroth documentation, the cylinder you are looking for can be identified with the following specifications.📊 Technical IdentificationThe HVBD type designates a differential cylinder with a piston rod for positioning (a sensor rod) .Component of Ordering Code Value / Code SignificanceType HVBD Differential cylinder with sensor rod Range / Piston Ø / Rod Ø 02 Piston diameter 25 mm / Rod diameter 16 mm Stroke Code A1 Code for a 5 mm stroke length (standard code is A)Note on A1: The official Rexroth ordering code table lists the standard code for a 5 mm stroke length simply as A . The A1 variant is not defined in the standard document. It is possible this denotes a specific mounting style or a custom variant.📋 Key Technical SpecificationsThe HVB series cylinders are designed to CNOMO standards with robust tie-rod construction .Parameter SpecificationNominal Pressure 200 bar Standards CNOMO 05.07.65 to 05.07.70 Piston Ø Range 25 to 125 mm Sensor Rod Included (HVBD type) A complete ordering code example for the standard variant would be: HVBD 02 A ... . For confirmation of the A1 variant, consulting the official Bosch Rexroth document RE 17047/11.03 or contacting them directly is recommended.

Based on the official Bosch Rexroth documentation, the cylinder you are looking for can be identified with the following specifications.📊 Technical IdentificationThe HVBD type designates a differential cylinder with a piston rod for positioning (a sensor rod) .Component of Ordering Code Value / Code SignificanceType HVBD Differential cylinder with sensor rod Range / Piston Ø / Rod Ø 02 Piston diameter 25 mm / Rod diameter 16 mm Stroke Code A1 Code for a 5 mm stroke length (standard code is A)Note on A1: The official Rexroth ordering code table lists the standard code for a 5 mm stroke length simply as A . The A1 variant is not defined in the standard document. It is possible this denotes a specific mounting style or a custom variant.📋 Key Technical SpecificationsThe HVB series cylinders are designed to CNOMO standards with robust tie-rod construction .Parameter SpecificationNominal Pressure 200 bar Standards CNOMO 05.07.65 to 05.07.70 Piston Ø Range 25 to 125 mm Sensor Rod Included (HVBD type) A complete ordering code example for the standard variant would be: HVBD 02 A ... . For confirmation of the A1 variant, consulting the official Bosch Rexroth document RE 17047/11.03 or contacting them directly is recommended.

Based on the official Bosch Rexroth documentation, the cylinder you are looking for can be identified with the following specifications.📊 Technical IdentificationThe HVBD type designates a differential cylinder with a piston rod for positioning (a sensor rod) .Component of Ordering Code Value / Code SignificanceType HVBD Differential cylinder with sensor rod Range / Piston Ø / Rod Ø 02 Piston diameter 25 mm / Rod diameter 16 mm Stroke Code A1 Code for a 5 mm stroke length (standard code is A)Note on A1: The official Rexroth ordering code table lists the standard code for a 5 mm stroke length simply as A . The A1 variant is not defined in the standard document. It is possible this denotes a specific mounting style or a custom variant.📋 Key Technical SpecificationsThe HVB series cylinders are designed to CNOMO standards with robust tie-rod construction .Parameter SpecificationNominal Pressure 200 bar Standards CNOMO 05.07.65 to 05.07.70 Piston Ø Range 25 to 125 mm Sensor Rod Included (HVBD type) A complete ordering code example for the standard variant would be: HVBD 02 A ... . For confirmation of the A1 variant, consulting the official Bosch Rexroth document RE 17047/11.03 or contacting them directly is recommended.

Based on the official Bosch Rexroth technical documentation, the fork clevis for the CD70/CD210 cylinder range is the CCKA series. The "Build Size 10" for this series corresponds to a specific clevis model.📊 CCKA Size 10 Specifications for CD70/CD210The Rexroth CCKA fork clevis is designed for attachment to the CD70, CG70, CD210, and CG210 cylinder series . The CCKA series is manufactured to ISO 8132 standards .Here are the key specifications for a CCKA 10 with piston rod diameters (ØMM) of 16mm or 18mm :Parameter Specification for CCKA 10Material Number (16mm rod) R900318486 Material Number (18mm rod) R900318488 Pin Diameter (ØCK H7) 12.7 mm Thread (KK) M10 x 1.5 Screw-in Length (LE min.) 19 mm Max. Dimensions (ER max.) 15.3 mm Weight (m) 0.2 kg Clamping Screw M6 (from CCKA 10 dimension table)Important Notes: The associated bolt with a diameter of Ø f7 (the required tolerance) and bolt lock are included in the scope of delivery but are not pre-assembled at the factory . This fork clevis is only possible with thread design "C" .

Fork Clevis CCKA -(Rexroth - Bosch) Accessories - ISO 8132 - Build Size 16.

Based on the official Bosch Rexroth technical documentation, the correct fork clevis (Gabelkopf) for your CD70 / CD210 cylinder with a 22 mm piston rod diameter is the CCKA 16 (Build Size 16) .Here are its key specifications from the Rexroth data sheets:Parameter SpecificationType CCKA 16 Material Number R900318488 Pin Diameter (ØCK H7) 19.1 mm Thread (KK) M16 x 1.5 Max. Length (CL1) 65 mm Screw-in Length (LE min.) 26 mm Weight (m) 1.0 kg 📌 Installation NotesThe associated bolt (Ø f7) and bolt lock are included in the scope of delivery but are not mounted in the factory .This fork clevis is only possible with thread design "C" .The fork clevis head must always be screwed against the piston rod shoulder. Then, the clamping screws must be tightened to the specified torque .