The Bosch Rexroth SV valve is a pilot-operated check valve with internal drain, designed for subplate mounting and to provide leak-free blocking of one actuator port . The specifications you've listed—NS6, 60 L/min max flow, and 315 bar max pressure—are confirmed by the technical data . The specific cracking pressure of 3 bar is an available option for this size .📊 Key Technical SpecificationsHere is a summary of the confirmed parameters based on the search results:Parameter SpecificationModel Series SV (Pilot Oil Return Internal) Nominal Size NS6 / NG6 / CETOP3 Maximum Operating Pressure 315 bar Maximum Flow 60 L/min Cracking Pressure (Selected) 3 bar Standard Cracking Pressures 1.5, 3, 6, 10 bar Mounting Type Subplate mounting Porting Pattern ISO 4401-03-02-0-05, ISO 5781-03-04-0-00 Weight (approx.) 0.8 kg 🔧 Understanding the Ordering CodeThe valve's specifications are encoded in its model number. A typical code for your configuration would be SV 6 P B2-6X/... , where:SV: Type (pilot-operated check valve with internal pilot oil return) .6: Nominal size (NS6) .P: For subplate mounting .B: Version without pre-opening .2: Cracking pressure of 3 bar .6X: Component series 60 to 69 (with unchanged installation dimensions) .The A or B in the code refers to the pre-opening feature. Version "A" includes pre-opening for dampened decompression and reduced switching shocks, while version "B" is without this feature . The standard cracking pressure options for this size are 1.5, 3, 6, and 10 bar .

Bosch Rexroth SV Pilot-Operated Check Valve (7 bar Cracking Pressure)For a 7 bar cracking pressure, the correct selection for the Bosch Rexroth SV pilot-operated check valve (NS6, 60 L/min, 315 bar) is not a direct standard option, as the standard cracking pressures are 1.5, 3, 6, and 10 bar .The 7 bar value is a standard option for larger valves, such as the NG10 and NG20 sizes in the same family .🔧 Understanding the Valve SpecificationThe "7 bar" value you've specified may refer to a specific configuration detail like the minimum pilot pressure for reliable valve opening, or a custom cracking pressure that requires a special order .Standard Cracking Pressures for NS6Code Cracking Pressure1 1.5 bar 2 3 bar 3 6 bar 4 10 bar ✅ Confirmed Technical SpecificationsDespite the cracking pressure question, the other key parameters are well-confirmed for the SV6 valve :Parameter ValueType SV (Pilot oil return internal) Nominal Size NS6 / NG6 Maximum Operating Pressure 315 bar Maximum Flow 60 L/min Porting Pattern ISO 4401-03-02-0-05 Weight (approx.) 0.8 kg

The 10 bar cracking pressure you specified is a standard option for the Bosch Rexroth SV6 pilot-operated check valve .✅ Confirmed Valve SpecificationsAll other key parameters for this valve configuration are confirmed as follows:Parameter ValueType SV (Pilot oil return internal, without drain connection) Nominal Size NS6 / NG6 / CETOP3 Maximum Operating Pressure 315 bar Maximum Flow 60 L/min Cracking Pressure 10 bar (code 4) Porting Pattern ISO 4401-03-02-0-05 Mounting Type Subplate mounting Weight (approx.) 0.8 kg 🔧 Ordering CodeTo specify the 10 bar cracking pressure, you would use the code 4 in the ordering code.The full ordering code follows this structure: SV 6 P B 4 - 6X/... .SV = Pilot-operated check valve with internal pilot oil return 6 = Nominal size 6 P = Subplate mounting B = Without pre-opening (version without dampened decompression) 4 = Cracking pressure of 10 bar 6X = Component series 60 to 69 (dimensions unchanged) /* = Placeholder for additional options like seal material (NBR or FKM) and corrosion resistance

The Rexroth CDT3 MP5 tie-rod cylinder is a robust, single-rod hydraulic cylinder designed for medium-duty industrial applications. It conforms to standards ISO 6020-2 and DIN 24554, which ensures it is compatible with a wide range of international machinery designs .📊 Technical Specifications (CDT3 MP5, 200mm Bore, 500mm Stroke)For your specified cylinder configuration of 200 mm bore and 500 mm stroke, the key parameters are as follows:Specification Value Source(s)Series CD Single-rod hydraulic cylinder, T3 Style Mounting MP5 Self-aligning clevis at cylinder base (bottom hinge lug) Nominal Pressure 160 bar (16 MPa) (Maximum 210 bar for static loads) Piston Diameter 200 mm (Maximum for this series) Stroke Length 500 mm (Up to 3,000 mm max available) ⚙️ Ordering Code ExampleThe Rexroth ordering code defines all cylinder attributes. An example for your specifications could be formatted as CDT3MP5/200//500..., where you must specify the piston rod diameter and other options. According to the Rexroth catalog, for piston diameters from 125 to 200 mm, only line connection "B" is possible .

For the Rexroth CDT3 MS2 tie-rod cylinder with a 200 mm bore and 500 mm stroke, here is a summary of its key technical specifications and application notes from the manufacturer's documentation.The Rexroth CDT3 series is a robust, single-rod hydraulic cylinder designed for medium-duty industrial applications. It conforms to standards ISO 6020-2 and DIN 24554, ensuring compatibility with a wide range of international machinery designs. The MS2 mounting style specifies a foot mounting (installation base) for a fixed and rigid installation.📊 Technical Specifications (CDT3 MS2, 200mm Bore, 500mm Stroke)Specification Value DetailsSeries CD Single-rod hydraulic cylinder, T3 StyleMounting MS2 Foot mounting (installation base)Nominal Pressure 160 bar (Maximum 210 bar for static loads)Piston Diameter 200 mm (Maximum available for the series)Stroke Length 500 mm (Maximum 3,000 mm available)⚙️ Ordering Code ExampleThe Rexroth ordering code defines all cylinder attributes. An example for your specifications could be formatted as CDT3MS2/200//500..., where you must specify the piston rod diameter and other options. According to the Rexroth catalog, for piston diameters from 125 to 200 mm, only line connection "B" is possible. The cylinder is built with a precisely machined, one-piece cylinder head that integrates the piston rod guide, contributing to a significantly extended service life.

For the Rexroth CDT3 MT4 tie-rod cylinder with a 200 mm bore and 500 mm stroke, here is a summary of its key technical specifications and application notes from the manufacturer's documentation .The Rexroth CDT3 series is a robust, single-rod hydraulic cylinder designed for medium-duty industrial applications. It conforms to standards ISO 6020-2 and DIN 24554, ensuring compatibility with a wide range of international machinery designs . The MT4 mounting style specifies a center trunnion (pivot) mount, which allows the cylinder to rotate around a fixed axis .📊 Technical Specifications (CDT3 MT4, 200mm Bore, 500mm Stroke)Your specified cylinder configuration of 200 mm bore and 500 mm stroke is a standard option for this series. The following table includes the key parameters and critical dimensions from the official Rexroth data sheet .Specification Value DetailsSeries CD Single-rod hydraulic cylinder, T3 Style Mounting MT4 Center trunnion mount Nominal Pressure 160 bar (Maximum 210 bar for static loads) Piston Diameter 200 mm (Maximum available for the series) Stroke Length 500 mm (Maximum 3,000 mm available) Critical Dimensions for MT4 Mounting (200mm Piston)Dimension Value (mm) DescriptionØTD 100 Trunnion diameter TK max 130 Trunnion length XV 154 + stroke Position of the trunnion from the cylinder base ZB max 336 Retracted length (without cushioning) ZK ±1 329 Retracted length (with cushioning) ZM ±2 361 Extended length (without cushioning) Port Thread (EE) G 3/4 Based on standardized connection ⚙️ Ordering Code ExampleThe Rexroth ordering code defines all cylinder attributes. An example for your specifications could be formatted as CDT3MT4/200//500..., where you must specify the piston rod diameter and other options. According to the Rexroth catalog, for piston diameters from 125 to 200 mm, only line connection "B" is possible . The cylinder is built with a precisely machined, one-piece cylinder head

The Rexroth CDT3 MP1 is a tie-rod cylinder with a fork (clevis) mounting at the cylinder base , which allows the cylinder to pivot.Your specified configuration of a 200 mm bore and 500 mm stroke is a standard option for the CDT3 series, which has a nominal pressure of 160 bar (16 MPa) . The series conforms to standards ISO 6020-2 and DIN 24554, ensuring compatibility across a wide range of machinery .📊 Technical Specifications OverviewSpecification Value DetailsSeries CD Single-rod hydraulic cylinder, T3 Style Mounting MP1 Fork at cylinder base Nominal Pressure 160 bar (Maximum 210 bar for static loads) Piston Diameter 200 mm Maximum available for the series Stroke Length 500 mm Up to 3000 mm max available ⚙️ Ordering Code and Design NotesOrdering Code Example: Your cylinder would be ordered with a code structure like CDT3MP5/200//500... . You will need to specify the piston rod diameter (options range from 12 to 140 mm) and other options like cushioning or seals.Series Limitations: For piston diameters from 125 to 200 mm, only a "B" line connection type is possible .Cylinder Design: The series includes a one-piece cylinder head with an integral piston rod guide for extended service life .

The Rexroth CDT3 MP3 is a tie-rod cylinder with a swivel eye at the cylinder base.Your specified configuration, with a 200 mm bore and 500 mm stroke, conforms to standards ISO 6020-2 and DIN 24554 and is a valid variant of the CDT3 series, which operates at a nominal pressure of 160 bar (16 MPa).📊 Technical Specifications OverviewSpecification Value DetailsSeries CD Single-rod hydraulic cylinder, T3 StyleMounting MP3 Swivel eye at cylinder baseNominal Pressure 160 bar (Maximum 210 bar for static loads)Piston Diameter 200 mm Maximum available for the seriesStroke Length 500 mm Standard option within the 3000 mm maximum⚙️ Ordering Code and Design NotesOrdering Code Example: Your cylinder would be ordered with a code structure like CDT3MP3/200//500.... You will need to specify the piston rod diameter and other options (like cushioning or seals) to complete the order code.Series Limitations: For piston diameters from 125 to 200 mm, only a "B" line connection type is possible.Cylinder Design: The series includes a one-piece cylinder head with an integral piston rod guide for extended service life.

The Rexroth CDT3 MT1 is a tie-rod cylinder with a trunnion mount at the cylinder head . Your specified configuration of a 200 mm bore and 500 mm stroke falls within the standard capabilities of the CDT3 series .📊 Technical Specifications OverviewThe Rexroth CDT3 series is a robust, single-rod hydraulic cylinder designed for medium-duty industrial applications. It conforms to standards ISO 6020-2 and DIN 24554, ensuring compatibility with a wide range of international machinery designs .Specification Value DetailsSeries CD Single-rod hydraulic cylinder, T3 Style Mounting MT1 Trunnion at cylinder head Nominal Pressure 160 bar (Maximum 210 bar for static loads) Piston Diameter 200 mm Maximum available for the series Stroke Length 500 mm Up to 3000 mm max available ⚙️ Ordering Code and Design NotesOrdering Code Example: Your cylinder would be ordered with a code structure like CDT3MT1/200//500.... You will need to specify the piston rod diameter (options range from 12 to 140 mm) and other options like cushioning or seals.Series Limitations: For piston diameters from 125 to 200 mm, only a "B" line connection type is possible .Cylinder Design: The series includes a one-piece cylinder head with an integral piston rod guide for extended service life .

For the Rexroth CDT3 MT2 tie-rod cylinder with a 200 mm bore and 500 mm stroke, here is a summary of its key technical specifications.The Rexroth CDT3 series is a robust, single-rod hydraulic cylinder designed for medium-duty industrial applications. It conforms to standards ISO 6020-2 and DIN 24554. The MT2 mounting style specifies a trunnion mount at the cylinder base, allowing the cylinder to pivot around a fixed axis at its rear end .📊 Technical Specifications (CDT3 MT2, 200mm Bore, 500mm Stroke)Your specified cylinder configuration is a valid standard option for this series. The table below includes the key parameters and a critical note regarding this mounting style.Specification Value DetailsSeries CD Single-rod hydraulic cylinder, T3 Style Mounting MT2 Trunnion at cylinder base Nominal Pressure 160 bar (Maximum 210 bar for static loads) Piston Diameter 200 mm Maximum available for the series Stroke Length 500 mm Up to 3000 mm maximum available ⚠️ Important Design Note for 200mm BoreFor piston diameters from 125 to 200 mm, only the "B" line connection type is possible, meaning the cylinder uses a pipe thread (G) connection according to ISO 1179-1 . Also, when using trunnion mounts like MT1, MT2, or MT4, it is important to account for the cylinder's own weight in the design, as lateral forces on the piston rod guides must be avoided .⚙️ Ordering Code StructureThe Rexroth ordering code follows a structure that defines all cylinder attributes . An example for your specifications would be formatted as CDT3MT2/200//500..., where you must specify the piston rod diameter (options up to 140 mm) and other options like cushioning or seals.