Trunnion Mounting Block CLTB -(Rexroth - Bosch) Accessories - ISO 8132 - Build Size 80.

For a CDH2 series cylinder with a 125 mm piston diameter, the correct trunnion mounting block is the CLTB 80.The "Build Size 80" in your query refers to the trunnion pin diameter (ØCR H7) of the bearing block.📊 CLTB 80 SpecificationsThe table below lists the key specifications and dimensions for the CLTB 80, based on the official Rexroth documentation.Parameter Specification for CLTB 80Type CLTB 80Material Number R900772615Nominal Force 320,000 N per pairTrunnion Pin Diameter (ØCR H7) 80 mmDimension (I1) 160 mmDimension (I2) 112 mmDimension (I3) 3.5 mmWeight Approx. 52.3 kg per pair🔧 Installation NotesCompatibility: This bearing block is suitable for attachment with the MT4 mounting style.Pair Requirement: Mounting blocks from the CLTB series are always supplied in pairs.

For a CST3 tie rod cylinder with an integrated position measuring system, a 200 mm bore, and a 1000 mm stroke is a standard configuration . The ME5 mounting style designates a rectangular flange at the cylinder head .The CST3 series is designed for a nominal pressure of 160 bar and a maximum stroke length of up to 3000 mm, so your 1000 mm requirement is well within the cylinder's capabilities .Key Technical SpecificationsBased on the official Rexroth technical data, the following specifications apply to your cylinder configuration :Parameter Specification for CST3 with 200mm BoreSeries CST3 (Tie rod cylinder with position measurement system)Mounting Type ME5 (Rectangular flange at head)Nominal Pressure 160 barMaximum Operating Pressure 160 bar (static load) Static Test Pressure 240 bar Piston Diameter (ØAL) 200 mmStroke Length 1000 mmMaximum Available Stroke 3000 mm Maximum Stroke Velocity 0.20 m/s Port Thread (EE) G 1 1/4 Ordering Code ExampleBased on the Rexroth ordering code structure for the CST3 series, your cylinder would be configured as follows :Series: CS (Differential cylinder with position measurement system)Type: T3Mounting: ME5Piston Diameter: 200Piston Rod Diameter: You will need to specify this (standard options for 200mm bore are 90 mm, 110 mm, or 140 mm) .Stroke Length: 1000A complete ordering code example would be structured as: CST3ME5/200//1000... .

For a CST3 tie rod cylinder with an integrated position measuring system, a 200 mm bore, and a 1000 mm stroke is a standard configuration. The MS2 mounting style designates a foot mounting (installation base) for rigid, fixed installations .📊 Technical Specifications & Ordering OverviewBased on the official Rexroth technical data, the following key specifications apply to your cylinder configuration :Series: CS (Differential cylinder with position measurement system)Type: T3Mounting: MS2 (Foot mounting)Nominal Pressure: 160 bar Piston Diameter (ØAL): 200 mmStroke Length: 1000 mmNote: The maximum available stroke for this series is up to 3000 mm, so your 1000 mm requirement is well within the cylinder's capabilities .Piston Rod Diameter (ØMM): Standard options for the 200 mm bore are 90 mm, 110 mm, or 140 mm .Maximum Stroke Velocity: 0.20 m/sPort Thread (EE): G 1 1/4🔧 Ordering Code StructureThe Rexroth ordering code defines all cylinder attributes. Based on your specification, the cylinder code would follow this structure :CST3MS2/200//1000...You will need to specify the piston rod diameter (choose from 90, 110, or 140 mm) and other options like cushioning or seals to complete the order code.

Based on the Bosch Rexroth technical documentation, the CST3 - MX5 tie rod cylinder with a 200 mm bore and 1000 mm stroke is a valid and common configuration. The MX5 mounting style specifies a tapped hole at the cylinder head .The Rexroth CST3 series is a tie-rod cylinder with an integrated position measuring system. It operates at a nominal pressure of 160 bar and conforms to standards ISO 6020/2, DIN 24554 .📊 Technical Specifications & Ordering OverviewBased on the official Rexroth technical data, the following key specifications apply to your cylinder configuration:Parameter Specification for CST3 with 200mm Bore & MX5Series CS (Differential cylinder with position measurement system) Type T3Mounting MX5 (Tapped hole at head) Nominal Pressure 160 bar Piston Diameter (ØAL) 200 mmStroke Length 1000 mmMaximum Available Stroke 2700 mm (for 200mm bore) Maximum Stroke Velocity 0.20 m/s Port Thread (EE) G 1 1/4 (based on dimension table) Piston Rod Diameter (ØMM) Standard options for the 200 mm bore: 90 mm, 110 mm, or 140 mm 🔧 Ordering Code StructureThe Rexroth ordering code defines all cylinder attributes. Based on your specification, the cylinder code would follow this structure:CST3MX5/200//1000...You will need to specify the piston rod diameter (choose from 90, 110, or 140 mm) and other options like cushioning or seals to complete the order code.

For a CST3 tie rod cylinder with an integrated position measuring system, a 200 mm bore, and a 1000 mm stroke is a valid configuration. The MP5 mounting style designates a self-aligning clevis at the cylinder base, which allows the cylinder to pivot and compensates for minor angular misalignments.📊 Technical SpecificationsThe Rexroth CST3 series operates at a nominal pressure of 160 bar. A 1000 mm stroke is well within the maximum available stroke of 3000 mm for this series. For a 200 mm bore, standard piston rod diameter options include 90 mm, 110 mm, or 140 mm.Parameter Specification for CST3 with 200mm Bore & MP5Series CST3 (Differential cylinder with position measurement system)Mounting MP5 (Self-aligning clevis at base)Nominal Pressure 160 barPiston Diameter (ØAL) 200 mmStroke Length 1000 mmMaximum Available Stroke 3000 mmPiston Rod Diameter (ØMM) Standard options: 90, 110, or 140 mmStandards ISO 6020/2, DIN 24554, NF/ISO 6020/2🔧 Ordering Code StructureThe Rexroth ordering code defines all cylinder attributes. Based on your specification, the cylinder code would follow this structure:CST3MP5/200//1000...For example, an order code for a cylinder with a 110 mm piston rod would be structured as: CST3MP5/200/110/1000.... You will need to specify the piston rod diameter (choose from 90, 110, or 140 mm) and other options like cushioning or seals to complete the order code.

A CST3 - MT4 tie rod cylinder with a 200 mm bore and a 1000 mm stroke is a standard configuration. The MT4 mounting style indicates a center trunnion mount, where the cylinder pivots around a central axis.📊 Technical Specifications for 200mm Bore (CST3 MT4)Based on the official Rexroth catalog, the key specifications for your cylinder configuration are as follows:Parameter Specification for CST3 with 200mm Bore & MT4Series CS (Differential cylinder with position measurement system)Type T3Mounting MT4 (Center trunnion)Nominal Pressure 160 barPiston Diameter (ØAL) 200 mmStroke Length 1000 mmMaximum Available Stroke 3000 mm (for 200mm bore)Piston Rod Diameter (ØMM) Standard options: 90 mm or 140 mmMaximum Stroke Velocity 0.20 m/sTrunnion Diameter (ØTD f8) 100 mmTrunnion Length (TK max) 130 mmPort Thread (EE) G 1 1/4📐 Key Dimensions (200mm Bore)For your 200 mm bore cylinder, these dimensions from the dimension table are critical for machine integration:Dimension Value (mm)XV 154 + strokePJ ±1.25 160Y ±2 98WH ±2 32GA 107.5GB 105E 245 ± 2The XV dimension is the position of the trunnion from the cylinder base. You must specify the "XV" dimension when ordering this cylinder.⚙️ Ordering Code StructureThe Rexroth ordering code defines all cylinder attributes. Based on your specification, the cylinder code would follow this structure:CST3MT4/200//1000...You will need to specify the piston rod diameter (choose from 90 or 140 mm) and other options like cushioning or seals.

Trunnion Mounting Block CLTA -(Rexroth - Bosch) Accessories - DIN 24556 - Build Size 12.

For the Trunnion Mounting Block CLTA applicable to your CDT3 / CDW160 cylinder with a 25 mm piston diameter, the correct model is the CLTA 12.The Rexroth technical documentation confirms that the CLTA 12 is specifically designed for cylinder series with a piston diameter (ØAL) of 25 mm .📊 CLTA 12 SpecificationsParameter ValueType CLTA 12Material Number R901071355 Nominal Force 8 kN (per pair) Trunnion Pin Diameter (ØCR H7) 12 mm Weight (per pair) 0.5 kg Compatible Cylinder Series CDT3; CGT3; CST3 Mounting Note: The CLTA series bearing blocks are always delivered in pairs and are designed for use with the AT 4 (clampable) mounting style for the specified cylinder series . The associated pin and locking feature are included in the scope of supply .

Trunnion Mounting Block CLTA -(Rexroth - Bosch) Accessories - DIN 24556 - Build Size 16.

Based on the official Bosch Rexroth technical documentation, the correct trunnion mounting block for your CDT3 / CDW160 cylinder series with a 32 mm piston diameter is the CLTA 16.The "Build Size 16" in your query refers to the trunnion pin diameter (ØCR H7) of the bearing block.📊 CLTA 16 SpecificationsThe table below lists the key specifications for the CLTA 16, based on the official Rexroth dimension tables .Parameter Specification for CLTA 16Type CLTA 16Material Number R901071364Nominal Force (per pair) 12.5 kNTrunnion Pin Diameter (ØCR H7) 16 mmWeight (per pair) 0.9 kg🔧 Installation NotesCompatibility: The CLTA series bearing blocks are designed for use with the AT 4 (clampable) mounting style for the CDT3, CGT3, and CST3 cylinder series .Pair Requirement: Mounting blocks from the CLTA series are always supplied in pairs .

The correct trunnion mounting block for a CDT3 / CDW160 cylinder with a 40 mm piston diameter is the CLTA 20.This is based on the official Bosch Rexroth dimension tables, which specify this model for a 40 mm piston diameter . The "Build Size 20" corresponds to the 20 mm trunnion pin diameter.📊 CLTA 20 SpecificationsBelow are the key specifications for the CLTA 20, confirmed by the Rexroth technical documentation .Parameter Specification for CLTA 20Type CLTA 20Material Number R901071365Nominal Force (per pair) 20 kNTrunnion Pin Diameter (ØCR H7) 20 mmWeight (per pair) 1.35 kgDimension (CO N9) 16 mmDimension (FK js12) 55 mm🔧 Installation NotesCompatibility: The CLTA series bearing blocks are designed for use with the AT 4 (clampable) mounting style for the CDT3, CGT3, and CST3 cylinder series .Pair Requirement: Mounting blocks from the CLTA series are always supplied in pairs .Lubrication: The block includes a lubrication nipple (cone head form A according to DIN 71412) .

Trunnion Mounting Block CLTA -(Rexroth - Bosch) Accessories - DIN 24556 - Build Size 25.

Based on the Bosch Rexroth technical documentation, the correct trunnion mounting block for a CDT3 / CDW160 cylinder series with a 50 mm piston diameter is the CLTA 25.📊 CLTA 25 SpecificationsThe table below lists the key specifications for the CLTA 25, based on the official Rexroth dimension tables.Parameter Specification for CLTA 25Type CLTA 25Material Number R901071368 Nominal Force (per pair) 32 kN Trunnion Pin Diameter (ØCR H7) 25 mm Weight (per pair) 2.4 kg 🔧 Installation NotesCompatibility: The CLTA series bearing blocks are designed for use with the AT 4 (clampable) mounting style for the CDT3, CGT3, and CST3 cylinder series.Pair Requirement: Mounting blocks from the CLTA series are always supplied in pairs.Lubrication: The block includes a lubrication nipple (cone head form A according to DIN 71412).