Trunnion Mounting Block CLTA -(Rexroth - Bosch) Accessories - DIN 24556 - Build Size 32.

For a CDT3 / CDW160 cylinder series with a 63 mm piston diameter, the correct trunnion mounting block is the CLTA 32 . The Rexroth technical documentation confirms this pairing, where the piston diameter (ØAL) is matched to the specific CLTA type .📊 CLTA 32 SpecificationsThe table below lists the key specifications and dimensions for the CLTA 32, based on the official Rexroth dimension tables .Parameter Specification for CLTA 32Type CLTA 32Material Number R901071377 Nominal Force (per pair) 50 kN Trunnion Pin Diameter (ØCR H7) 32 mm Weight (per pair) 5.0 kg Dimension (CO N9) 25 mm Dimension (FK js12) 75 mm Dimension (FN max) 110 mm Dimension (FS js14) 15 mm 🔧 Installation NotesCompatibility: The CLTA series bearing blocks are designed for use with the AT 4 (clampable) mounting style for the CDT3, CGT3, and CST3 cylinder series .Pair Requirement: Mounting blocks from the CLTA series are always supplied in pairs .

Trunnion Mounting Block CLTA -(Rexroth - Bosch) Accessories - DIN 24556 - Build Size 50.

Based on the official Bosch Rexroth technical documentation, the correct trunnion mounting block for your CDT3 / CDW160 cylinder series with a 100 mm piston diameter is the CLTA 50 .📊 CLTA 50 SpecificationsThe "Build Size 50" refers to the diameter of the trunnion pin (ØCR). The table below lists the key specifications for the CLTA 50, based on the official Rexroth dimension table .Parameter Specification for CLTA 50Type CLTA 50Material Number R901071385 Nominal Force (per pair) 125 kN Trunnion Pin Diameter (ØCR H7) 50 mm Weight (per pair) 15 kg Dimension (CO N9) 36 mm Dimension (FK js12) 105 mm 🔧 Installation NotesCompatibility: The CLTA series bearing blocks are designed for use with the AT 4 (clampable) mounting style for the CDT3, CGT3, and CST3 cylinder series .Pair Requirement: Mounting blocks from the CLTA series are always supplied in pairs .

Trunnion Mounting Block CLTA -(Rexroth - Bosch) Accessories - DIN 24556 - Build Size 63.

The correct trunnion mounting block for the specified CDT3 / CDW160 cylinder series with a 125 mm piston diameter is the CLTA 63. The "Build Size 63" in your query corresponds to the nominal trunnion pin diameter.📊 CLTA 63 SpecificationsBased on the official Rexroth documentation, the key specifications for the CLTA 63 are detailed in the table below. This bearing block is designed for use with the MT4 (clampable) mounting style .Parameter Specification for CLTA 63Type CLTA 63 Material Number R901071395 Compatible Cylinder Series CDT3; CGT3; CST3 🔧 Installation NotesPair Requirement: Mounting blocks from the CLTA series are always supplied in pairs .Application: This block is suitable for use with cylinders where a pivoting motion is required .

For the CDL1 M00 mill-type cylinder, here are the key specifications for the configuration you requested: a 32 mm bore and a 250 mm stroke.📊 Technical Specifications (CDL1 M00, 32mm Bore, 250mm Stroke)The M00 designation means the cylinder is supplied without any mounting elements, making it suitable for custom integration. The Rexroth CDL1 series is a heavy-duty mill-type cylinder with a nominal pressure of 160 bar (16 MPa) and the ability to operate up to 240 bar for applications with up to 200,000 load cycles.Here is a summary of the key parameters for your cylinder:Parameter Specification for CDL1 M00Series CDL1Mounting M00 (Without mounting)Nominal Pressure 160 bar (16 MPa)Piston Diameter (ØAL) 32 mmPiston Rod Diameter (ØMM) 18 mm (standard for 32mm bore)Stroke Length 250 mm📐 Dimensional DataFor an M00 mounting, the exact dimensions are defined on page 16 of the official Rexroth technical document (RE 17325). The 32mm bore is one of the smaller sizes in this series, for which the MP5 (self-aligning clevis) mounting style is not available. The cylinder's design principle for this size range can be either a screwed head and base, or a screwed head with a welded base.⚙️ Key Design & Ordering NotesOrdering Code: To order, use a code structure like CDL1M00/32/18/250D1X/B1... to define the mounting, bore, rod, and stroke lengths.Permissible Stroke: For a 32mm bore with an 18mm rod, the maximum permissible stroke length to avoid piston rod buckling is a critical design factor. The datasheet’s buckling table (pages 20-23) should be consulted for this specific configuration.

The Rexroth CDL1 MF3 is a robust mill-type cylinder from the CDL1 series, designed for a nominal pressure of 160 bar (16 MPa) and capable of handling operating pressures up to 240 bar (24 MPa) for applications with up to 200,000 load cycles . The MF3 mounting style specifies a round flange at the cylinder head .The configuration you specified—a 200 mm bore and 1000 mm stroke—is a valid standard option for this series . For a 200 mm bore, the standard piston rod diameter options are 90 mm, 110 mm, or 140 mm .Technical Specifications (CDL1 MF3, 200mm Bore, 1000mm Stroke)The key technical parameters for your cylinder are as follows:Parameter Specification for CDL1 MF3 (200mm Bore)Series CDL1 Mill-Type Cylinder Mounting MF3 – Round flange at cylinder head Nominal Pressure 160 bar (16 MPa) Max. Operating Pressure Up to 240 bar (24 MPa) Piston Diameter (ØAL) 200 mm Piston Rod Diameter (ØMM) 90 mm, 110 mm, or 140 mm Stroke Length 1000 mm (Maximum up to 3000 mm) Ordering Code ReferenceA complete Rexroth ordering code for this configuration would follow a structure like CDL1MF3/200//1000D1X/B1CHUWWW .CDL1MF3/200//1000: Defines the series, mounting style, piston diameter, rod diameter, and stroke.D1X: Component series 1X (10 to 19; installation and connection dimensions remain unchanged) .B1: Pipe thread connection (ISO 228-1) and port position .CHUWWW: Options for piston rod version (hard chrome plated), piston rod end (thread), and seal version (standard for mineral oil) .

For the Rexroth CDL1 MF4 mill-type cylinder, the configuration you specified—a 200 mm bore and 1000 mm stroke—is a valid standard option for this series .The MF4 mounting style specifies a round flange at the cylinder base .Technical Specifications (CDL1 MF4, 200mm Bore, 1000mm Stroke)Series: CDL1 Mill-Type Cylinder Mounting: MF4 – Round flange at cylinder base Nominal Pressure: 160 bar (16 MPa) Piston Diameter (ØAL): 200 mm Piston Rod Diameter (ØMM): 110 mm (standard option for 200mm bore) Stroke Length: 1000 mm (Maximum up to 3000 mm) Design Principle: For this size range, the cylinder can be configured with either a screwed head and base, or a screwed head with a welded base .Max Stroke Velocity: 0.5 m/s Ordering Code ReferenceA complete Rexroth ordering code for this configuration follows a structure like CDL1MF4/200/110/1000... .You will need to specify the piston rod diameter and other options like seal type, cushioning, and port positions to complete the order code.

The Rexroth CDL1 MP5 is a heavy-duty, single-rod mill-type cylinder with a self-aligning clevis at the base .Your specified 200mm bore and 1000mm stroke is a standard configuration for this series. The technical data from the Rexroth catalog confirms the key specifications for this setup.📊 Technical SpecificationsSpecification Value for CDL1 MP5Nominal Pressure 160 bar Max. Operating Pressure 240 bar Piston Diameter (ØAL) 200 mmPiston Rod Diameter (ØMM) 110 mm (standard for 200mm bore) Stroke Length 1000 mm (maximum up to 3000 mm) Weight 100 kg (base for 0mm stroke) + 15.30 kg (per 100mm stroke) Mounting Style MP5 - Self-aligning clevis at base The weight calculation for a 1000mm stroke is: 100 kg + (15.30 kg × 10) = **253 kg** .🔧 Mounting and Ordering DetailsThe self-aligning clevis at the base (MP5) is available for piston diameters from 40mm to 200mm .MP5 Mounting Dimensions (200mm Bore) :Thread (KK): M80 x 2Thread Length (A): 80 mmPivot Pin Dia (PK): 154 mmDimension X1: 134 mmOrdering Code Example: CDL1MP5/200/110/1000D1X/B1CHUWWW .

For the Rexroth CDL1 MT4 mill-type cylinder, the configuration you specified—a 200 mm bore and 1000 mm stroke—is a valid standard option for this series . The MT4 mounting style specifies a trunnion (pivot) mount .Technical Specifications (CDL1 MT4, 200mm Bore, 1000mm Stroke)Series: CDL1 Mill-Type Cylinder Mounting: MT4 – Trunnion mount Nominal Pressure: 160 bar (16 MPa) Piston Diameter (ØAL): 200 mm Piston Rod Diameter (ØMM): 110 mm (standard option for 200mm bore) Stroke Length: 1000 mm (Maximum up to 3000 mm) Max Stroke Velocity: 0.5 m/s 📐 Dimensional Data for CDL1 MT4 (200mm Bore)The following key dimensions for the MT4 mounting style are detailed in the Rexroth catalog :Dimension Value (mm) DescriptionKK M80 x 2 Piston rod threadA 80 Piston rod thread lengthNV 95 Thread lengthPK 154 Pivot pin diameterX1 134 Distance from head to trunnion centerZB 336 Retracted length (for 0 mm stroke)Important Note: When ordering a trunnion-mount cylinder, you must specify the XV dimension (the position of the trunnion from the cylinder base) in the clear text of your order .Ordering Code ReferenceA complete Rexroth ordering code for this configuration follows a structure like CDL1MT4/200/110/1000D1X/B1CHUWWW .CDL1MT4/200/110/1000: Defines the series, mounting style, piston diameter, rod diameter, and stroke.D1X: Component series 1X (10 to 19; installation and connection dimensions remain unchanged) .B1: Pipe thread connection (ISO 228-1) and port position .CHUWWW: Options for piston rod version (hard chrome plated), piston rod end (thread), and seal version (standard for mineral oil) .

Based on the search results, the Rexroth 4WS2E is a two-stage, 4-way directional servo valve designed for use with external electronics.Here is a summary of its key specifications and characteristics that match your request:✅ Confirmed Product SpecificationsParameter Specification Source(s)Model Series 4WS.2E (Two-stage servo valve) Nominal Size NG6 (Size 6) Valve Type 4-way, mechanical feedback Pilot Stage Nozzle/flapper plate amplifier Max. Operating Pressure 315 bar Porting Pattern ISO 4401-03-02-0-05 (CETOP 3) Nominal Flow 2 ... 25 L/min (at 70 bar differential) The 2 L/min flow rate you specified at a 70 bar valve pressure differential is a standard nominal flow option for this valve series.🔧 Design & Operation FeaturesThe valve is a two-stage unit that combines a torque motor with a hydraulic amplifier. Key design features include:A dry torque motor that separates the electrical coil from the hydraulic fluid to prevent contamination.A nozzle/flapper plate as the first hydraulic stage, which converts the electrical signal from the torque motor into a pressure differential.A spool with mechanical feedback, which provides a direct, wear-free connection to the feedback element.📋 Valve Series and Application ContextThe 4WS.2E series is also available in sizes NG10 and NG16, with maximum flows up to 200 L/min. It is used for applications requiring precise closed-loop control of position, force, or velocity.

The Bosch Rexroth 4WS2E servo valve is a two-stage, 4-way directional valve designed for high-precision closed-loop control applications like position, force, and speed control . It is operated by external electronics (servo amplifier) which are ordered separately .The 5 L/min nominal flow rate you specified is a standard option for this valve when measured at the 70 bar valve pressure differential (35 bar per control edge) . The NG6 (Nominal Size 6) version conforms to the ISO 4401-03-02-0-05 porting pattern .✅ Technical SpecificationsParameter Specification Source(s)Model Series 4WS2E (Two-stage servo valve) Nominal Size 6 (NG6 / CETOP 3) Maximum Operating Pressure 315 bar Nominal Flow (at 70 bar Δp) 5 L/min (±10% tolerance) Porting Pattern ISO 4401-03-02-0-05 🔧 Ordering Code StructureThe Rexroth ordering code for your specific valve follows this structure :4WS2E: Electrically operated 2-stage servo valve for external control electronics .6: Nominal size 6 .2X: Component series 20 to 29 (unchanged installation dimensions) .5: Nominal flow of 5 L/min at 70 bar ....: Additional codes for spool overlap, seal material, and other options .A complete order code example for a 5 L/min valve is 4WS2EM6-2X/5B12ET210K17EV .