Eye Brackets CLEA - (Rexroth - Bosch) Accessories. - CLEA (39).

Based on the Rexroth documentation, the CLEA (39) eye bearing block and the corresponding CCKA fork clevis are confirmed as accessories for the specified cylinder ranges .✅ Product Compatibility & SelectionThe "Build Size 39" in the CLEA eye bearing block and the "Build Size 39" in the CCKA fork clevis must be paired correctly . The pistons and piston rods you specified are standard options for the CD70 and CD210 series.CLEA (39) Eye Bearing BlockThis eye bearing block is listed as an accessory for the CD70/CG70 and CD210/CG210 cylinder series .CCKA Fork ClevisFor the CCKA fork clevis, the correct model depends on the piston rod diameter (d) . Your specified piston rod diameters of 50/56 mm match the Build Size 39 from the Rexroth dimension tables.Piston Rod Diameter (d) Fork Clevis CCKA Material No.50/56 mm CCKA 39 R900318496

Based on the official Bosch Rexroth technical documentation (RE 17042), the CLEA (48) eye bearing block and the corresponding CCKA fork clevis are confirmed as accessories for the CD70 and CD210 cylinder series .✅ Product Compatibility & SelectionThe "Build Size 48" in the CLEA eye bearing block and the "Build Size 48" in the CCKA fork clevis must be paired correctly. The pistons and piston rods you specified are standard options for the CD70 and CD210 series.CLEA (48) Eye Bearing BlockThis eye bearing block is listed as an accessory for the CD70/CG70 and CD210/CG210 cylinder series .CCKA Fork ClevisFor the CCKA fork clevis, the correct model depends on the piston rod diameter (d) . Your specified piston rod diameters of 63/70 mm match the Build Size 48 from the Rexroth dimension tables.Piston Rod Diameter (d) Fork Clevis CCKA Material No.63/70 mm CCKA 48 R900318492 / R900541067Note: The specific dimensional data for the CLEA (48) model was not included in the search results excerpt. The referenced Rexroth document RE 17042 contains the full technical data, including dimensions and load ratings, for the complete accessory range .

Based on the official Bosch Rexroth technical documentation, the CLEA (58) eye bearing block and the associated CCKA fork clevis are confirmed as valid accessories for the specified cylinder ranges .✅ Product Compatibility & SelectionThe "Build Size 58" in the CLEA eye bearing block must be paired with the "Build Size 58" in the CCKA fork clevis. The pistons and piston rods you specified are standard options for the CD70 and CD210 series.CLEA (58) Eye Bearing BlockThis eye bearing block is listed as an accessory for the CD70/CG70 and CD210/CG210 cylinder series .CCKA Fork ClevisFor the CCKA fork clevis, the correct model depends on the piston rod diameter (d). Your specified piston rod diameter of 80 mm matches the Build Size 58 from the Rexroth dimension tables .Piston Rod Diameter (d) Fork Clevis CCKA Material No.80 mm CCKA 58 R900318498Note: The specific dimensional data for the CLEA (58) model was not included in the search results excerpt. The referenced Rexroth document RE 17042 contains the full technical data, including dimensions and load ratings, for the complete accessory range .

Eye Brackets CLEA - (Rexroth - Bosch) Accessories. - CLEA (64).

Based on the official Rexroth documentation, the CLEA (64) eye bearing block and the CCKA fork clevis are confirmed as a valid accessory combination for the specified cylinder ranges .✅ Product Compatibility & SelectionThe "Build Size 64" in the CLEA eye bearing block is designed to be paired with the appropriate CCKA fork clevis. The piston rod diameter you specified, 90 mm, is the correct size for this combination.CLEA (64) Eye Bearing BlockThis eye bearing block is listed as an accessory for the CD70/CG70 and CD210/CG210 cylinder series .For Cylinder Series Piston Diameter (D) Type Material No. Pin Diameter (ØCK H7) Weight (kg)CD70 / CG70 150 mm CLEA 64 R900318523 76.23 mm 26.0 CCKA Fork ClevisFor the CCKA fork clevis, a 90 mm piston rod diameter corresponds to the CCKA 64 model, as per the Rexroth dimension tables.Piston Rod Diameter (d) Fork Clevis CCKA Material No.90 mm CCKA 64 R900318498

Based on the search results, here is the available information regarding the Bosch Rexroth 2-Way Proportional Throttle Valve Type FES, specifically for Nominal Size 25.✅ Product Confirmation and SpecificationsThe Type FES is a pilot-operated, 2-way proportional throttle valve designed for cartridge/block installation . Your specified nominal size (NG) 25 is a standard variant within the FES valve family .The following specifications are confirmed for the FES valve family:Parameter SpecificationType FES / FESE (2-way proportional throttle valve) Nominal Sizes (NG) 25 to 63 Component Series 3X Maximum Operating Pressure 315 bar (at ports A, B, X) Porting Pattern Cartridge type to DIN 24342 (Form A) / ISO/DIS 7368 Max Flow Rate (NG25) 600 L/min 🔧 Features and DesignDesign: The valve consists of four main assemblies: a cover with pilot oil connections, a main valve with an orifice spool, a pilot control valve with a proportional solenoid, and (in some variants) integrated control electronics .Operation: It provides continuous control of flow. The position of the main spool is controlled in a closed loop based on the command value. An inductive position transducer provides actual position feedback .Integral Control Electronics: Your search query specified the valve has "Integral Control Electronics." It is important to differentiate between two variants:Type FES: This valve is designed to be used with external control electronics .Type FESE: This is the variant with integral control electronics (OBE) . Product listings confirm the existence of FESE25 models with integrated electronics .Fail-Safe: In the event of a power failure or cable break, the spool automatically moves to the closed position, blocking flow in both directions .Let me know if you require details on a different nominal size or the variant with external electronics (Type FES).

The Bosch Rexroth FES (and its variant FESE) is a pilot-operated 2-way proportional throttle valve for block installation, designed for the continuous control of flow. For a Nominal Size 32 valve with integral control electronics as you've specified, the correct model is a variant of the FESE type .✅ Product Confirmation and Key SpecificationsThe "FESE" designation in the model number confirms the valve is equipped with integrated control electronics (OBE), distinguishing it from the "FES" type which requires external control electronics .Your specifications match the FESE 32 model, a standard variant in the Rexroth product line . The table below lists the key performance characteristics for this valve size .Parameter SpecificationValve Type FESE (2-way proportional throttle valve with integrated electronics) Nominal Size (NG) 32 Component Series 3X Maximum Operating Pressure 315 bar (at ports A, B, and X) Porting Pattern Cartridge type to DIN 24342, Form A / ISO/DIS 7368 Max Flow Rate (NG32) 1000 L/min ⚙️ Valve Models and Ordering ExamplesThe search results reference several specific models within the FESE 32 range, each with different flow ratings and connection variants. This confirms the availability of the exact valve type you are looking for:R900973605 FESE32CA-3X/450LK0B1M: A specific model with a maximum flow of 450 L/min and a voltage command value interface .R901012850 FESE32CA-3X/450LK0B1M=LB: Another variant of the same base model .R901033548 FESE32CA-3X/450LK0G1M: A variant with a current command value interface (4 to 20 mA) .FESE32CA-3X/450LK4M: A model with a flow rating of 450 L/min .FESE32CA-3X/450LK0B1V: Another variant of the NG32 valve .The "CA" in the valve type code likely designates the spool variant and flow characteristics for the valve.💡 Understanding the "FESE" Valve DesignThe FESE valve's function is defined by its integrated electronics and closed-loop control design:Closed

The Bosch Rexroth valve that meets your precise specification—a 2-way proportional throttle valve, Type FES, Nominal Size 63, with integral control electronics—is the FESE 63.The "E" in the type code identifies the variant with integrated control electronics (OBE), which you requested. The standard model is the FESE 63 CA-3X/1800LK0B1M (material no. R900954505).🔧 Technical Specifications for NG63 with OBEThe technical data confirms the following key parameters for this valve series at Nominal Size 63:Parameter Specification for FESE 63Valve Type FESE (2-way proportional throttle valve with integrated electronics)Nominal Size (NG) 63Component Series 3X (Series 30-39, dimensions unchanged)Max. Operating Pressure 315 barNominal Flow Rate 1800 L/min (at Δp = 10 bar)Porting Pattern DIN ISO 7368 (cavity)Area Ratio 1.6 : 1Weight 21.2 kg💡 Understanding the Valve VariantsThe FESE 63 valve is available in several variants, primarily distinguished by the type of command value interface:Model Type Command Value Interface Material No.FESE 63 CA-3X/1800LK0B1M Voltage interface (0 to 10 V) R900954505FESE 63 CA-3X/1800LK0G1M Current interface (4 to 20 mA) R900764316The valve features a component plug according to DIN 43651, weighs approximately 21.2 kg, and can handle flow in both directions (A to B and B to A). In the event of a power supply failure, the integrated electronics de-energize the solenoid, and the spool automatically moves to its closed position to block flow.

The Bosch Rexroth Type FES proportional flow control valve is a pilot-operated 2-way throttle valve designed for block installation, providing continuous control of flow .For a Type FES valve without integral control electronics—which you specified—an external amplifier is required for operation . This is distinct from the "FESE" variant, which has built-in (OBE) electronics .🔧 Key Specifications for NG25 (Without Integral Electronics)The technical specifications for the NG25 valve are as follows:Parameter SpecificationValve Type FES (2-way proportional throttle valve without integral electronics) Nominal Size (NG) 25 Component Series 3X (Series 30 to 39, dimensions unchanged) Maximum Operating Pressure 315 bar (at ports A, B, and X) Porting Pattern DIN 24342 Form A / DIN ISO 7368 (cavity) Max Flow Rate (NG25) 600 L/min Area Ratio (Main Spool) 2 : 1 💡 Understanding the Valve VariantsThe key difference between the FES and FESE variants is the location of the control electronics:Type FES: This is the valve specified in your query. It does not have integral control electronics. It requires a separate, external amplifier to control the position of the main spool . This external electronics unit must be ordered separately.Type FESE: This variant has integrated control electronics (OBE) . It is a fully matched unit with either a voltage or current interface . Product listings show models such as FESE 25 CA-3X/315LK0B1M (material no. R900973604) for this version .

The Bosch Rexroth valve that matches your exact specification is the Type FES (without integral electronics). For a Type FES valve, external control electronics must be ordered separately . This is distinct from the "FESE" variant, which has on-board electronics (OBE) .🔧 Key Specifications for NG32 FES ValveThe technical specifications for the FES valve series are well-documented . The following table summarizes the key parameters for the Nominal Size 32 model.Parameter Specification for NG32Valve Type FES (2-way proportional throttle valve without integral electronics) Nominal Size (NG) 32 Component Series 3X (Series 30 to 39, dimensions unchanged) Maximum Operating Pressure 315 bar (at ports A, B, and X) Porting Pattern DIN 24342 Form A / DIN ISO 7368 (cartridge type) Nominal Flow Rate 450 L/min (at Δp = 10 bar) Max Flow Rate (NG32) 1000 L/min Area Ratio (Main Spool) 2 : 1 💡 Understanding the Valve VariantsThe primary distinction between the FES and FESE variants is the location of the control electronics :Type FES: This is the valve specified in your query. It does not have integral control electronics. It requires a separate, external amplifier to control the position of the main spool . This external electronics unit must be ordered separately.Type FESE: This variant has integrated control electronics (OBE) . It is a completely matched unit available with either voltage (0 to 10 V) or current (4 to 20 mA) interfaces .🔧 Ordering Code BreakdownBased on the product data, an example of a complete ordering code for this configuration could be structured as FES 32 CA-3X/450LK4M . The "CA" in the type code likely designates the spool variant and flow characteristics. The "LK" indicates the flow characteristics are linear .

The Bosch Rexroth Type FES 40 valve is the correct 2-way proportional throttle valve for your specified configuration without integral control electronics.🔧 Technical Specifications for NG40 FES ValveThe following table summarizes the key technical parameters for the Type FES 40:Parameter SpecificationValve Type FES (2-way proportional throttle valve without integral electronics)Nominal Size (NG) 40Component Series 3X (Series 30-39, dimensions unchanged)Max. Operating Pressure 315 bar (at ports A, B, and X)Porting Pattern DIN ISO 7368 (cartridge type)Nominal Flow Rate 670 L/min (at Δp = 10 bar)Max Flow Rate (A→B) 680 L/min (at Δp = 10 bar)Max Flow Rate (B→A) 585 L/min (at Δp = 10 bar)Area Ratio (Main Spool) 2 : 1Weight 8.2 kg (FES) / 8.4 kg (FESE)💡 Understanding the Valve TypeThe Type FES is designed for use with an external control electronics unit, which must be ordered separately. This is distinct from the "FESE" variant, which has on-board electronics (OBE).Key features of the FES valve include:Pilot-operated, 2-way proportional throttle valve for block installationCommand value-dependent position control of the orifice spoolThe position of the main spool is controlled in a closed loop using an external amplifier and an inductive position transducerIn the event of a power failure, cable break, or withdrawal of the enable signal, the spool automatically moves to the seated position, blocking flow in both directions🔧 Ordering Code ExampleBased on the ordering code structure from the official Rexroth documentation, a complete ordering code for this configuration could be structured as: FES 40 CA-3X/670LK4M.The code elements represent the valve type, size, spool variant, component series, flow rating, and options.Proportional Flow Control Valve (Rexroth - BOSCH).- 2-Way Proportional Throttle Valve Type FES.- Nominal Size 50.- Porting Pattern To DIN 24342 Form A.- Without Integral Control