Based on the available search results, a Bosch Rexroth self-aligning clevis designated as CGKM could not be found. However, the correct model for a self-aligning clevis with a 63 mm internal bush diameter for the CDM1 / CDL1 cylinder ranges is CGKD 63 .✅ Correct Part Identification: CGKD 63The CGKD designation is the standard type used for clampable swivel heads across the relevant cylinder families, and multiple sources confirm the CGKD 63 model as the component with a 63 mm internal bush diameter .📊 Specifications for CGKD 63Here are the key specifications for the CGKD 63 self-aligning clevis:Parameter SpecificationType CGKD 63 Material Number R900322028 Internal Bush Diameter (CN H7) 63 mm Nominal Force 200,000 NThread (KK) M48 x 2📌 Installation Note: As noted in the documentation for other CGKD variants, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque.

Based on the available search results, a self-aligning clevis with the CGKM designation you used was not found. However, the correct model for an 80 mm internal bush diameter for the CDM1 / CDL1 cylinder ranges is the CGKD 80 .✅ Correct Part Identification: CGKD 80This is confirmed by the official dimension tables for both the CDM1/CGM1/CSM1 and CDH2/CGH2 series, where the CGKD 80 is listed with an internal bush diameter (CN H7) of 80 mm .📊 Specifications for CGKD 80Here are the key specifications for the CGKD 80 self-aligning clevis :Parameter SpecificationType CGKD 80Material Number R900322700Internal Bush Diameter (CN H7) 80 mmNominal Force 320,000 NThread (KK) M64 x 3Clamping Screw M20 x 50 (ISO 4762-10.9)Tightening Torque (Mₜ) 410 NmWeight (m) 15 kgMisalignment Angle (Z) 4°📌 Installation Note: As noted in the documentation, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque .

Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 100.

A self-aligning clevis with the CGKM designation could not be found in the search results. However, the correct model for an 80 mm internal bush diameter (DN/CN) for the CDM1 / CDL1 cylinder ranges is the CGKD 80 .This is confirmed in the official technical documentation, which lists the CGKD 80 as having an internal bush diameter (CN H7) of 80 mm and a nominal force of 320,000 N .📊 Specifications for CGKD 80Here are the key specifications for the CGKD 80 self-aligning clevis:Parameter SpecificationType CGKD 80 Material Number R900322700 Internal Bush Diameter (CN H7) 80 mm Nominal Force 320,000 N Thread (KK) M64 x 3 Clamping Screw M20 x 50 (ISO 4762-10.9) Tightening Torque (Mₜ) 410 Nm Weight (m) 15 kg 📌 Installation Note: The self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque .

Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 125.

A self-aligning clevis with the CGKM designation could not be found in the available documentation. However, the correct model for an 125 mm internal bush diameter (DN/CN) for the CDM1 / CDL1 cylinder ranges is the CGKD 125.✅ Correct Part Identification: CGKD 125This is confirmed by official Rexroth dimension tables for both the CDM1 and CDH2 series, which list the CGKD 125 with an internal bush diameter (CN H7) of 125 mm.📊 Specifications for CGKD 125Here are the key specifications for the CGKD 125 self-aligning clevis:Parameter SpecificationType CGKD 125Material Number R900322026Internal Bush Diameter (CN H7) 125 mmNominal Force 800,000 NThread (KK) M100 x 3Clamping Screw M24 x 70 (ISO 4762-10.9)Tightening Torque (Mₜ) 710 NmWeight (m) 52.5 kg📌 Installation Note: The self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque.

The Rexroth CGH1 is a robust mill-type double rod cylinder designed for demanding industrial applications. It operates at a nominal pressure of 250 bar (25 MPa) and meets the requirements of standards like ISO 3320 .The MF3 mounting style specifies a round flange at the cylinder head . For your configuration of a 63 mm bore and 450 mm stroke, the standard piston rod diameter options are 36 mm or 45 mm .📊 Technical Specifications & Dimensions for 63mm Bore (CGH1 MF3)The table below summarizes the key performance data and critical dimensions for your cylinder, based on official Rexroth documentation .Parameter Specification for CGH1 MF3 (63mm Bore)Series CGH1 (Mill Type Double Rod Cylinder)Mounting Style MF3 (Round flange at head)Nominal Pressure 250 bar (25 MPa)Piston Diameter (ØAL) 63 mmPiston Rod Diameter (ØMM) 36 mm or 45 mmStroke Length 450 mm (Max. up to 6000 mm)Key Dimensions (in mm)Dimension ValuePiston Rod Thread (KK) M28x1.5 (for 36mm rod) / M30x2 (for 45mm rod)Port Thread (EE) G3/4Retracted Length (ZP) Determined by stroke and cushioning🔧 Ordering Code ReferenceThe Rexroth ordering code for this cylinder follows the structure CGH1MF3/63//450A3X/B11... . An example of a complete code is CGH1MF3/63/36/450A3X/B11CADMW, where 63 is the bore, 36 is the rod diameter, and 450 is the stroke in millimeters .Note on Application Limits: The specified operating pressures and force values are only valid for shock-free applications. With extreme loads (e.g., high sequence cycles), mounting elements and piston rod connections need to be designed for durability .

The Rexroth CGH1 is a robust mill-type double rod cylinder designed for demanding industrial applications. It operates at a nominal pressure of 250 bar (25 MPa) and meets the requirements of standards like ISO 3320 .The MS2 mounting style specifies a foot mounting for a fixed, rigid installation . For your configuration of a 63 mm bore and 450 mm stroke, the standard piston rod diameter options are 36 mm or 45 mm .📊 Technical Specifications & Dimensions for 63mm Bore (CGH1 MS2)The table below summarizes the key performance data and critical dimensions for your cylinder, based on official Rexroth documentation .Parameter Specification for CGH1 MS2 (63mm Bore)Series CGH1 (Mill Type Double Rod Cylinder) Mounting Style MS2 (Foot mounting) Nominal Pressure 250 bar (25 MPa) Piston Diameter (ØAL) 63 mm Piston Rod Diameter (ØMM) 36 mm or 45 mm Stroke Length 450 mm (Max. up to 6000 mm) Max. Stroke Velocity 0.28 m/s (at 63mm piston) Key Dimensions (in mm)Dimension ValuePiston Rod Thread (KK) M28x1.5 (for 36mm rod) / M30x2 (for 45mm rod) Port Thread (EE) G3/4 Retracted Length (ZP) Determined by stroke and cushioning 🔧 Ordering Code ReferenceThe Rexroth ordering code for this cylinder follows the structure CGH1MS2/63//450A3X/B11... . An example of a complete code is CGH1MS2/63/36/450A3X/B11CADMW, where 63 is the bore, 36 is the rod diameter, and 450 is the stroke in millimeters.Note on Application Limits: The specified operating pressures and force values are only valid for shock-free applications. With extreme loads (e.g., high sequence cycles), mounting elements and piston rod connections need to be designed for durability

The Rexroth CGH1 is a robust mill-type double rod cylinder designed for a nominal pressure of 250 bar (25 MPa) . The MT4 mounting style specifies a trunnion (pivot) mount, which allows the cylinder to rotate around a fixed axis.For your configuration of a 63 mm bore, the standard piston rod diameter options are 36 mm or 45 mm .📊 Technical Specifications for 63mm Bore (CGH1 MT4)The table below summarizes the key performance data and critical dimensions for your cylinder, based on official Rexroth documentation .Parameter Specification for CGH1 MT4 (63mm Bore)Series CGH1 (Mill Type Double Rod Cylinder)Mounting Style MT4 (Trunnion mount)Nominal Pressure 250 bar (25 MPa) Piston Diameter (ØAL) 63 mmPiston Rod Diameter (ØMM) 36 mm or 45 mmStroke Length 450 mm (Max. up to 6000 mm) Key Dimensions (in mm)Dimension ValuePiston Rod Thread (KK) M28x1.5 (for 36mm rod) / M30x2 (for 45mm rod) Port Thread (EE) G3/4 Trunnion Diameter (QCD H11) 35 mm Trunnion Length (M1) 40 mm Note on Application Limits: The specified operating pressures and force values are only valid for shock-free applications. With extreme loads (e.g., high sequence cycles), mounting elements and piston rod connections need to be designed for durability . The XV dimension (trunnion position from the cylinder base) must be specified when ordering a trunnion-mount cylinder .

The Rexroth CDT3 ME5 is a tie-rod cylinder designed for a nominal pressure of 160 bar and conforms to standards ISO 6020-2 and DIN 24554. The ME5 mounting style specifies a rectangular flange at the cylinder head, providing a rigid and fixed mounting point. Your configuration of an 80 mm bore and 50 mm stroke is a standard option for this series.📊 Key Technical SpecificationsFor the CDT3 series with an 80 mm bore, the standard piston rod diameter options are 45 mm or 56 mm. The specifications for your cylinder are as follows:Parameter Specification for CDT3 ME5 (80mm Bore)Series CD (Single-rod hydraulic cylinder, T3 Style)Mounting ME5 (Rectangular flange at cylinder head)Nominal Pressure 160 barPiston Diameter (ØAL) 80 mmStroke Length 50 mm (Maximum up to 3000 mm)Port Thread (EE) Typically G1/2 (based on standard configurations)⚙️ Ordering Code ReferenceThe Rexroth ordering code for this cylinder follows a structure like CDT3ME5/80//50.... You will need to specify the piston rod diameter (choose from 45 or 56 mm) and other options like cushioning or seals to complete the order code.

The Rexroth CDT3 ME6 you specified is a tie-rod cylinder with a rectangular flange at the cylinder base. For your configuration with an 80 mm bore, 50 mm stroke, and a nominal pressure of 160 bar, this is a standard and valid variant.📊 Key Technical SpecificationsThe key parameters for your cylinder are derived from the official Rexroth documentation:Series: CD - Single-rod hydraulic cylinder, T3 Style.Mounting: ME6 - Rectangular flange at cylinder base.Standards: ISO 6020-2, DIN 24554.Nominal Pressure: 160 bar (Maximum 210 bar for static loads).Piston Diameter (ØAL): 80 mm.Stroke Length: 50 mm (within the 3000 mm maximum).Piston Rod Diameter: Standard options for an 80 mm bore include 36 mm, 45 mm, or 56 mm.Port Connection: Typically G 3/4 for line connection type "B".⚙️ Ordering Code ReferenceThe Rexroth ordering code for your cylinder follows a structure like CDT3ME6/80//50.... In this code, 80 is the bore and 50 is the stroke in millimeters. You will need to specify the piston rod diameter (e.g., 36, 45, or 56 mm) and other options like cushioning and seals to complete the order code.

The Rexroth CDT3 MP1 is a tie-rod cylinder with a fork (clevis) mounting at the cylinder base. For your configuration of an 80 mm bore and 50 mm stroke, this is a standard and permissible variant.📊 Technical Specifications & Ordering OverviewThe following table summarizes the key specifications for your cylinder configuration, based on the official Rexroth documentation.Parameter Specification for CDT3 MP1Series CD (Single-rod hydraulic cylinder, T3 Style)Mounting MP1 (Fork at cylinder base)Nominal Pressure 160 bar (Maximum 210 bar for static loads)Piston Diameter (ØAL) 80 mmStroke Length 50 mm (Maximum up to 3000 mm)Piston Rod Diameter (ØMM) Standard options for an 80 mm bore are 36 mm, 45 mm, or 56 mmStandards ISO 6020-2, DIN 24554⚙️ Ordering Code ReferenceThe Rexroth ordering code defines all cylinder attributes. Based on your specification, the cylinder code would follow this structure:CDT3MP1/80//50...You will need to specify the piston rod diameter (choose from 36, 45, or 56 mm) and other options like cushioning or seals to complete the order code. An example of a complete ordering code is CDT3MP1/80/56/127/Z1X/B1CHDTWWW, where 80 is the bore, 56 is the rod diameter, and 127 is the stroke in millimeters.