Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (12).

Based on the available search results, a Rexroth mounting block with the exact designation CLTM for the CDM1 cylinder series could not be found. The official Bosch Rexroth technical documentation for the CDM1 series does not list this specific model as a standard accessory .However, the Rexroth catalog for the CDM1 series includes a comprehensive list of other available accessories. Fork-type mounting blocks (CLCA) and self-aligning clevises (CGKD) are documented for the CDM1 range . The CLTM designation found in search results is for a standard industrial support bracket from a third-party manufacturer (MISUMI) and is not a Rexroth hydraulic cylinder accessory .🔍 What the Search Results ShowThe search results confirm that CLTM refers to a "side mounting" bracket used for supporting device stands . The model CLTM12 is a support block with a 12 mm hole diameter, available from the manufacturer MISUMI, not from Bosch Rexroth .

Based on the official Bosch Rexroth technical documentation for the CDM1 series, a mounting block with the exact designation CLTM is not a standard accessory for this cylinder range. The official catalog for the CDM1 cylinder series, which lists all standard mounting types and accessories, does not include CLTM.The product code CLTM that you are using appears to be a designation for a support bracket used in linear motion systems, which is available from the manufacturer MISUMI, not from Bosch Rexroth as a hydraulic cylinder accessory.🔍 What the Search Results ShowFor the CDM1 mill-type cylinder, the official Bosch Rexroth catalog lists a comprehensive range of standard accessories, including fork-type mounting blocks (CLCA) and self-aligning clevises (CGKD), but there is no mention of a CLTM mounting block.💡 How to Find the Correct AccessoryTo find the correct mounting block for your CDM1 cylinder, follow these steps:Verify the Correct Product Code: The "CLTM" designation is not a Rexroth hydraulic accessory code. The correct mounting blocks for the CDM1 series are from the CLCA and CLCD series.Consult the Official Documentation: The most reliable source of information is the official Bosch Rexroth catalog RE 17329, which contains complete details on all available mounting elements and accessories.

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (20).

Based on the official Bosch Rexroth technical catalog for the CDM1 cylinder series, the CLTM designation for a mounting block was not found as a standard accessory. The correct part for the CDM1 cylinder range is from the CLCA series of fork-type mounting blocks .For your cylinder with a 20 mm hole diameter, piston rod end G, and a piston rod diameter of 14 mm, the compatible mounting block would be a CLCA 12 . This is a clampable clevis bracket manufactured to ISO 8132 standards .✅ Correct Part Identification: CLCA 12For the CDM1 cylinder series, the table for fork-type mounting blocks shows that the CLCA 12 is the correct accessory for a 14 mm piston rod (and a 25 mm piston) .Parameter SpecificationDesignation CLCA 12Material Number R900542861 Nominal Force 8,000 N Pin Diameter (CK H9) 12 mm For Piston Rod Diameter (d) 14 mm Weight 0.45 kg

Based on the available Bosch Rexroth documentation, a mounting block with the exact designation CLTM is not a standard accessory for the CDM1 cylinder series .The official technical catalog for the CDM1 series (RE 17329) lists a comprehensive range of standard mounting accessories, including fork-type mounting blocks (CLCA), self-aligning clevises (CGKD), and pins, but there is no mention of a CLTM mounting block . The CLTM designation found in your query may refer to a support bracket or a product from a different manufacturer, not a Rexroth hydraulic cylinder accessory.🔍 Correct Accessories for CDM1For the CDM1 cylinder series, the correct fork-type mounting blocks are from the CLCA series. These are manufactured to ISO 8132 standards .Based on the CDM1 accessory table, here is the recommended part for your specifications :Parameter SpecificationDesignation CLCA 16For Piston Rod Diameter (d) 18 mm (Piston Rod End G) or 22 mm (Piston Rod End H)Material Number R900542862Nominal Force 12,500 NPin Diameter (CK H9) 16 mmWeight 1.0 kgNote: The CLCA 16 is the correct fork-type mounting block for CDM1 cylinders with piston rod diameters of 18 mm and 22 mm . Your query specified a hole diameter (CR) of 20 mm, but the standard Rexroth accessory for this rod size uses a 16 mm pin. If a 20 mm hole is required, the cylinder rod end configuration may be different.

Based on the available search results, a mounting block with the exact designation CLTM was not found in the Bosch Rexroth documentation for the CDM1 cylinder range . The official catalogs for the CDM1 series list standard accessories such as fork-type mounting blocks (CLCA) and self-aligning clevises, but do not reference a CLTM series .🔍 Correct Accessory: Fork-type Mounting Block CLCAFor the CDM1 cylinder with piston rod diameters of 36 mm (Rod End G) and 45 mm (Rod End H), the correct fork-type mounting block from the official catalog is the CLCA 32 . This component is manufactured to ISO 8132 standards .Here are the key specifications for this block:Parameter SpecificationDesignation CLCA 32Material Number R900542865Nominal Force 50,000 NPin Diameter (CK H9) 32 mm💡 Explanation of FindingsThe CLTM designation you are using does not appear to be a standard Rexroth code for CDM1 mounting accessories. The correct block series for the CDM1 is CLCA . The referenced CLTM is a support bracket designation used by other manufacturers for different applications, and is not a Rexroth hydraulic cylinder accessory .To find the correct part, it is recommended to verify the code against the official Bosch Rexroth catalog RE 17329, which contains the complete accessories section .

The specific "CLTM (40)" designation you are searching for is not listed as a standard Rexroth mounting block for the CDM1 cylinder range. The official Bosch Rexroth catalog for the CDM1 series shows that the correct accessory for fork-type mounting is from the CLCA series .✅ Correct Accessory Identification: CLCA 50According to the official dimension tables for the CDM1 series, the correct fork-type mounting block for a piston rod diameter of 56 mm (associated with Piston Rod End H, D=80mm) is the CLCA 50 .This block is manufactured to ISO 8132, form B . Please see the key specifications below .Parameter Specification for CLCA 50Designation CLCA 50Material Number R900542867Nominal Force 125,000 N (125 kN)Pin Diameter (CK H9) 50 mmWeight (approx.) 15.5 kgImportant Note: The "Hole Diameter CR" you specified as 40 mm corresponds to the CLCA 40 block. However, the official table shows this is paired with a 45 mm piston rod, not the 56 mm rod you mentioned for piston rod end H with D=80 mm . For a 56 mm rod, the correct block is definitively the CLCA 50.

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (50).

Based on the official Bosch Rexroth documentation, the CLTM model code you've provided does not match the standard part numbers for the CDM1 cylinder series. The correct equivalent is a fork-type mounting block from the CLCA series .✅ Correct Part Identification: CLCA 50For a CDM1 cylinder with a 56 mm piston rod diameter (Rod End G) or a 70 mm rod diameter (Rod End H, with a 100 mm piston), the correct mounting block is the CLCA 50 . This clevis bracket is manufactured according to ISO 8132, form B .Parameter Specification for CLCA 50Designation CLCA 50 Material Number R900542867 Nominal Force 125,000 N Pin Diameter (CK H9) 50 mm Weight (approx.) 15.5 kg 🔍 Explanation of Product Code DiscrepancyThe CLTM designation is not a standard Rexroth code for hydraulic cylinder accessories found in the official CDM1 catalog . The correct mounting block series for this cylinder family is CLCA .

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (63).

Based on the official Rexroth technical documentation for the CDM1 series, a mounting block with the exact designation CLTM is not a standard accessory for this cylinder range .The CLTM designation found in your query may refer to a support bracket or a product from a different manufacturer, not a Rexroth hydraulic cylinder accessory .✅ Correct Accessory: Fork-type Mounting Block CLCAFor the CDM1 cylinder with piston rod diameters of 70 mm (Rod End G) and 90 mm (Rod End H, with a 125 mm piston), the correct fork-type mounting block from the official catalog is the CLCA 63 .This component is a clampable clevis bracket manufactured to ISO 8132, form B standards .Here are the key specifications for this block :Parameter Specification for CLCA 63Designation CLCA 63Material Number R900542868Nominal Force 200,000 N (200 kN)Pin Diameter (CK H9) 63 mmWeight (approx.) 27.5 kg

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (80).

A Rexroth accessory with the exact designation CLTM could not be found in the provided technical catalogs for the CDM1 cylinder series. The correct standard fork-type mounting block for your specified piston rod diameters (90 mm or 110 mm) is the CLCA 80, from the CLCA series .✅ Correct Part Identification: CLCA 80The official Rexroth documentation for the CDM1 series shows that the CLCA fork-type mounting block is the standard accessory used with the MP5 mounting style and swivel heads . For the piston rod diameters you specified, the corresponding model is the CLCA 80.Here are its key specifications:Parameter Specification for CLCA 80Designation CLCA 80Material Number R900542869Nominal Force 320,000 N (320 kN)Pin Diameter (CK H9) 80 mmWeight (approx.) 47 kgThis fork-type mounting block is manufactured according to ISO 8132, form B .

Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (100).

Based on the Rexroth technical catalog for the CDM1 series, a mounting block with the exact designation CLTM is not listed. The correct standard accessory for your cylinder is a fork-type mounting block from the CLCA series .For a CDM1 cylinder with a 110 mm piston rod diameter (Rod End G) or a 140 mm rod diameter (Rod End H with a 200 mm piston), the correct mounting block is the CLCA 100. This is a clampable clevis bracket manufactured to ISO 8132, form B .Here are its key specifications:Parameter Specification for CLCA 100Designation CLCA 100Nominal Force 500,000 N (500 kN)Pin Diameter (CK H9) 100 mmWeight (approx.) On requestMaterial Number Not listed; contact RexrothThis information comes from the official CDM1 accessory table, which lists the CLCA series as the standard fork-type mounting block for this cylinder range . The CLTM designation you mentioned was not found in the available Rexroth documentation for hydraulic cylinder accessories.