Based on the official Bosch Rexroth technical documentation for the CDM1 series, a mounting block with the exact designation CLTM is not a standard accessory for this cylinder range.For your specific CDM1 cylinder with a 140 mm piston rod diameter, the correct fork-type mounting block is the CLCA 125, which is the standard accessory type used with this cylinder series.✅ Correct Part Identification: CLCA 125For a CDM1 cylinder with a 140 mm piston rod diameter (Piston Rod End G), the corresponding model from the official catalog is the CLCA 125.This is a clevis bracket manufactured to ISO 8132, form B standards.Here are its key specifications from the Rexroth dimension tables:Parameter Specification for CLCA 125Designation CLCA 125Material Number On request (not listed in the standard table)Nominal Force 800,000 NPin Diameter (CK H9) 125 mmWeight On requestThis data is directly from the official Rexroth CDM1 catalog, which states that for a piston rod diameter of 140 mm, the mounting block required is the CLCA 125. The "hole diameter" you specified (125 mm) matches the pin diameter (CK H9) of this exact block.

Based on the Rexroth technical documentation, the cylinder configuration you specified—a CST3 series tie-rod cylinder with a 100 mm bore and an 800 mm stroke—is a standard and valid combination.📊 Product & SpecificationsThe MP5 designation in your query indicates the cylinder has a self-aligning clevis at the cylinder base for pivoting motion .Model Series: CST3...Z (Differential cylinder with an integrated position measuring system) .Mounting Style (MP5): Self-aligning clevis at the cylinder base .Nominal Pressure: 160 bar (maximum 210 bar static) .Bore Diameter (ØAL): 100 mm .Stroke Length: 800 mm. The series supports strokes up to 3000 mm, and your specified stroke is within the permissible range .Standards: Meets ISO 6020/2, DIN 24554, and NF/ISO 6020/2 .⚙️ Ordering Code StructureThe Rexroth ordering code for this cylinder follows the structure CST3MP5/100//800... . For a 100 mm bore, the standard piston rod diameters (ØMM) are 45 mm or 70 mm. The "MP5" code is correctly used to specify the self-aligning clevis .

The cylinder configuration you specified, a CST3 series tie-rod cylinder with a 100 mm bore and an 800 mm stroke, is a standard and valid combination according to the official Rexroth documentation.📊 Product & SpecificationsModel Series: CST3...Z (Differential cylinder with position measurement system) .Mounting Style (ME5): Rectangular flange at the cylinder head .Bore Diameter (ØAL): 100 mm .Stroke Length: 800 mm. The series supports strokes up to 3000 mm , and an 800 mm stroke is within the permissible range .⚙️ Ordering Code StructureThe Rexroth ordering code for this cylinder follows the structure CST3ME5/100//800... . An example similar to your specification is CST3ME5/100/45/800... . For a 100 mm bore, standard piston rod diameters (ØMM) are 45 mm or 70 mm .

Tie Rod Cylinder With Position Measuring Systems CST3 - ME5.

The cylinder configuration you specified, a CST3 series tie-rod cylinder with a 100 mm bore and an 800 mm stroke, is a standard and valid combination according to the official Rexroth documentation.📊 Product & SpecificationsModel Series: CST3...Z (Differential cylinder with position measurement system) .Mounting Style (ME5): Rectangular flange at the cylinder head .Bore Diameter (ØAL): 100 mm .Stroke Length: 800 mm. The series supports strokes up to 3000 mm , and an 800 mm stroke is within the permissible range .⚙️ Ordering Code StructureThe Rexroth ordering code for this cylinder follows the structure CST3ME5/100//800... . An example similar to your specification is CST3ME5/100/45/800... . For a 100 mm bore, standard piston rod diameters (ØMM) are 45 mm or 70 mm .

Tie Rod Cylinder With Position Measuring Systems CST3 - MS2.

The cylinder configuration you specified—a CST3 series tie-rod cylinder with a 100 mm bore and an 800 mm stroke—is a standard and valid combination.📊 Product & SpecificationsModel Series: CST3...Z (Differential cylinder with position measurement system) .Mounting Style (MS2): Foot mounting .Bore Diameter (ØAL): 100 mm .Stroke Length: 800 mm. The series supports strokes up to 3000 mm, and your 800 mm stroke is within the permissible range .⚙️ Ordering Code StructureThe Rexroth ordering code for this cylinder follows the structure CST3MS2/100//800... . For a 100 mm bore, standard piston rod diameters (ØMM) are 45 mm or 70 mm .

Based on the technical documentation for the CST3 series from Rexroth, a 100 mm bore with an 800 mm stroke is a standard and permissible configuration. The MX5 mounting type indicates a tapped hole at the cylinder head for a rigid, fixed installation .The Rexroth ordering code for your specific cylinder would follow the structure CST3MX5/100//800... . For a 100 mm bore, the standard piston rod diameters (ØMM) are 45 mm or 70 mm .📊 Series SpecificationsThe CST3 series is designed with the following key parameters :Parameter SpecificationModel Series CST3 (Differential cylinder with position measuring system)Mounting Style (MX5) Tapped hole at the cylinder head Nominal Pressure 160 bar Bore Diameter (ØAL) 100 mm (range 40…200 mm) Stroke Length 800 mm (max up to 3000 mm) Standards ISO 6020/2, DIN 24554, NF/ISO 6020/2 The integrated position measurement system operates on the magnetostrictive principle, providing contactless and precise stroke feedback .

The cylinder configuration you have specified—a CST3 series tie-rod cylinder with a 100 mm bore, 800 mm stroke, and MT4 center trunnion mounting—is a standard and valid combination, as confirmed by Bosch Rexroth technical documentation.For a 100 mm bore, standard piston rod diameters (ØMM) are 56 mm or 70 mm. The "MT4" indicates a trunnion mount located in the center of the cylinder, allowing it to pivot.📊 Key Specifications & Dimensions for 100mm Bore (CST3 MT4)The table below provides the relevant technical specifications derived from the official Rexroth catalog.Parameter Specification for 100mm Bore / MT4 MountingModel Series CST3...Z (Differential cylinder with position measuring system)Mounting Type MT4 (Center trunnion)Nominal Pressure 160 barBore Diameter (ØAL) 100 mmPiston Rod Diameter (ØMM) 56 mm or 70 mmStroke Length 800 mm (max up to 3000 mm)Trunnion Diameter (QTD f8) 50 mmTrunnion Length (TK max) 70 mmPiston Rod Thread (KK) M33 x 2 (for 56 mm rod) / M33 x 2 (for 70 mm rod)Port Thread (EE) G 3/4Retracted Length (ZK) 248 mm⚙️ Ordering Code StructureThe Rexroth ordering code follows a specific structure. For your specifications, the cylinder code would follow this pattern:CST3MT4/100//800...You must specify the piston rod diameter (choose from 56 or 70 mm) and other options like cushioning or seals to complete the order code.

The Bosch Rexroth 4WRL 10 E V-5X/50-150/... valve matches your specifications and is a standard 4/3-way high-response directional valve with integrated control electronics (OBE). This valve provides precise control of flow and pressure in closed-loop systems.✅ Product SpecificationsThe table below summarizes the key technical specifications for your valve configuration.Specification DetailValve Type 4WRL (4/3-way high-response directional valve)Nominal Size 10 (NG10)Component Series 5X (Series 50 to 59)Symmetric Spool E - Symmetrical spool overlapNominal Flow 50 L/min (at 10 bar pressure differential per control edge)Spool Control Direct-operated pilot control valve with position feedback of both spoolsElectronics Integrated control electronics (OBE)Pilot Oil Supply External supplyPilot Oil Drain External drainPorting Pattern ISO 4401-05-05-0-05Max. Operating Pressure 315 bar (port A/B)Pilot Pressure Min. 15 bar, max. 315 bar🔧 Understanding the Ordering CodeThe type code structure for this valve is confirmed by multiple sources. An example order code is 4WRL 10 E V-5X/50-150/....The code breaks down as follows:4WRL: 4/3-way high-response directional valve with integrated electronics.10: Nominal size 10.E: Symmetrical spool overlap (as specified).V: "Valves with servo valves as pilot valve" (pilot valve type).5X: Component series 50 to 59.50: Nominal flow of 50 L/min.150: Pilot control pressure (e.g., 150 bar).The external supply and external drain you requested are defined in the valve options.

Based on the official Bosch Rexroth documentation, the 4WRL 10 E V-5X/50-150/... valve is the correct model matching your specifications . The key difference in your configuration is the E designation for the pilot oil supply, which represents internal supply, external drain .✅ Valve Specifications & Ordering CodeThe specifications for your exact valve configuration are detailed in the table below:Specification DetailValve Type 4WRL (4/3-way high-response directional valve)Nominal Size 10 (NG10)Component Series 5X (Series 50 to 59)Symmetrical Spool E - Symmetrical spool overlapNominal Flow 50 L/min (at 10 bar pressure differential per control edge)Spool Control Direct-operated pilot control valve with position feedback of both spoolsElectronics Integrated control electronics (OBE)Pilot Oil Supply Internal supplyPilot Oil Drain External drainPorting Pattern ISO 4401-05-05-0-05Max. Operating Pressure 315 bar (port A/B)Ordering Code Example:4WRL 10 E V-5X/50-150/...🔧 Understanding the Type CodeThe code breaks down as follows:4WRL: 4/3-way high-response directional valve with integrated electronics.10: Nominal size 10.E: Symmetrical spool overlap (as specified).V: Pilot control valve type (servo valve as pilot valve).5X: Component series 50 to 59.50: Nominal flow of 50 L/min.150: Pilot control pressure (e.g., 150 bar).

Based on the Bosch Rexroth product documentation, a 4WRL valve matching your specifications is available. The valve's type code for your configuration of internal supply, internal drain is 4WRL 10 E V-5X/50-150/... . This valve is a 4/3-way high-response directional valve with integrated control electronics (OBE), direct-operated pilot control, and position feedback for both spools.✅ Valve SpecificationsThe table below summarizes the technical specifications for your exact configuration.Specification DetailValve Type 4WRL (4/3-way high-response directional valve)Nominal Size 10 (NG10)Component Series 5X (Series 50 to 59)Symmetric Spool E - Symmetrical spool overlap (as specified)Nominal Flow 50 L/min (at 10 bar pressure differential per control edge)Spool Control Direct-operated pilot control valve with position feedback of both spoolsElectronics Integrated control electronics (OBE)Pilot Oil Supply Internal supplyPilot Oil Drain Internal drain (as specified)Porting Pattern ISO 4401-05-05-0-05Max. Operating Pressure 315 bar (port A/B)Pilot Pressure Min. 15 bar, max. 315 bar🔧 Understanding the Type CodeThe type code for your valve is 4WRL 10 E V-5X/50-150/... . The "ET" in the ordering code is part of the additional options, specifying internal pilot oil supply and internal drain. The code breaks down as follows:4WRL: 4/3-way high-response directional valve with integrated electronics.10: Nominal size 10.E: Symmetrical spool overlap (as specified).V: Pilot control valve type (servo valve as pilot valve).5X: Component series 50 to 59.50: Nominal flow of 50 L/min.150: Pilot control pressure (e.g., 150 bar).