Based on the official Bosch Rexroth technical data sheet (RE 17051) for swivel heads, the correct CGKA Size 30 self-aligning clevis (clamping version) is fully compatible with your specified cylinder configurations .🔧 Key Specifications for CGKA 30The table below summarizes the confirmed technical data for the swivel head :Parameter Specification for CGKA 30Material no. R900327187 Thread (KK 6H) M20x1.5 Pin Diameter (ØCN) 30 mm Nominal Force 108 kN (head) / 39.9 kN (admissible) Weight 1.3 kg Standard ISO 8133 ✅ Compatibility ConfirmationThe CGKA 30 uses an M20x1.5 thread . The official Bosch Rexroth documentation indicates that this specific thread type is compatible with the piston rod ends and piston diameters you specified :With Piston Rod Ends F and H: This configuration is used with a Piston Diameter D=63 mm .With Piston Rod Ends D and K: This configuration is used with a Piston Diameter D=40 mm .This confirms the CGKA 30 is the correct accessory for both cylinder configurations you've outlined.

Self-aligning Clevis (Clamping Version) - Rexroth - Bosch Accessories. - CGKA. - Size 40.

Based on the official Rexroth documentation, the CGKA 40 self-aligning clevis (clamping version) is the correct accessory for your specified cylinder configurations.✅ Key Specifications for CGKA 40Parameter Specification for CGKA 40Material no. R900327188 Thread (KK 6H) M27x2 Pin Diameter (ØCN) 40 mmNominal Force Information missingWeight Information missing🔧 Compatibility ConfirmationThe CGKA 40 uses an M27x2 thread. This thread type is compatible with the piston diameters and rod ends you specified:With Piston Rod Ends F and H: Used with Piston Diameter D=80 mm .With Piston Rod Ends D and K: Used with Piston Diameter D=50 mm .This confirms the CGKA 40 is the correct accessory for both cylinder configurations outlined in your request.

Based on the official Bosch Rexroth technical documentation, the CGKA 50 self-aligning clevis (clamping version) is the correct accessory for your specified cylinder configurations.The CGKA series adheres to ISO 8133 / DIN 24555 standards . A model with the material number R900327368 is listed as a swivel head .🔧 Key Specifications for CGKA 50Parameter Specification for CGKA 50Material no. R900327368 Thread (KK 6H) M33 x 2 Pin Diameter (ØCN) 50 mm Weight (approx.) 4.4 kg Nominal Force 245 kN (head) / 90.4 kN (admissible) ✅ Compatibility ConfirmationThe CGKA 50 uses an M33 x 2 thread . According to the Rexroth dimension table for this swivel head, the CGKA 50 is compatible with the following piston diameters and rod ends :With Piston Rod Ends F and H: Used with Piston Diameter D=100 mm.With Piston Rod Ends D and K: Used with Piston Diameter D=63 mm.This confirms the CGKA 50's complete compatibility with both cylinder configurations outlined in your request.

Self-aligning Clevis (Clamping Version) - Rexroth - Bosch Accessories. - CGKA. - Size 60.

Based on the official Rexroth documentation, the CGKA 60 self-aligning clevis (clamping version) is the correct accessory for your specified cylinder configurations.The CGKA series adheres to ISO 8133 standards . The model is identified by the material number R900327369 .🔧 Key Specifications for CGKA 60Parameter Specification for CGKA 60Material no. R900327369 Thread (KK 6H) M42 x 2 Pin Diameter (ØCN) 60 mm Nominal Force 380 kN (head) / 140.2 kN (admissible) Weight 8.4 kg ✅ Compatibility ConfirmationThe CGKA 60 uses an M42 x 2 thread. According to the Rexroth dimension tables for the CDT3 and CDW160 series, this swivel head is compatible with the following piston diameters and rod ends :With Piston Rod Ends F and H: Used with Piston Diameter D=125 mm.With Piston Rod Ends D and K: Used with Piston Diameter D=80 mm.This confirms the CGKA 60's complete compatibility with both cylinder configurations outlined in your request.

Self-aligning Clevis (Clamping Version) - Rexroth - Bosch Accessories. - CGKA. - Size 80.

Based on the official Bosch Rexroth documentation, the CGKA 80 self-aligning clevis is the correct accessory for your specifications, meeting the ISO 8133 standard .🔧 Key Specifications for CGKA 80Parameter Specification for CGKA 80Material no. R900327370 Thread (KK 6H) M48 x 2 Pin Diameter (ØCN) 80 mm Head Force (Nominal) 585 kN Admissible Load (Fadm) 215.9 kN Weight 15.6 kg (listed as 15 kg in other sources )✅ Compatibility ConfirmationThe search results confirm the CGKA 80 is the correct component for your specified cylinder configurations :With Piston Rod Ends F and H: Used with Piston Diameter D=160 mm.With Piston Rod Ends D and K: Used with Piston Diameter D=100 mm.

Self-aligning Clevis (Clamping Version) - Rexroth - Bosch Accessories. - CGKA. - Size 100.

Based on the search results, the correct self-aligning clevis for your specifications is the CGKA 100. The "Size 100" in your request refers to the pin diameter of the clevis.🔧 Key Specifications for CGKA 100The search results confirm the following specifications for the CGKA 100:Parameter SpecificationDesignation CGKA 100 Material no. R900327371 Standard ISO 8133 Model Description GELENKKOPF CGKA 100 KPL ✅ Compatibility ConfirmationThe search results confirm the CGKA 100 is an accessory compatible with the CDT3 cylinder range:A cylinder of this type was listed with a "CGKA" swivel head (material no. R900327186) in an example configuration .The CGKA series is listed as an accessory specifically for the CDT3 / CDW160 cylinder ranges, compatible with the piston rod ends you specified .

Based on the official Bosch Rexroth documentation, a directional poppet valve of the M-SED series, size 6, directly matches your specified requirements.✅ Product ConfirmationThe technical specifications for this valve type are confirmed by the manufacturer's data and product listings.Model Series: The M-SED series covers direct-operated directional poppet valves with solenoid actuation. It is available as a 2/2, 3/2, or 4/2-way version.Nominal Size: A valve from the Size 6 (NG6) series is the correct option, as this is the standard offered for the M-SED line.Maximum Flow: The maximum flow capacity for this valve series is confirmed as 25 l/min.Maximum Pressure: The component is designed for an operating pressure of up to 350 bar.Solenoid Type: The valve uses a wet-pin DC solenoid with a detachable coil, which is a key feature of the M-SED series.Porting Pattern: The interface conforms to the specified standards, with the locating bore being an optional feature.Manual Override: It features a protected manual override (with concealed auxiliary actuation) for operation without power.Port TB Blind Hole: The designation of a blind hole on port TB is due to the valve's internal structure. In a 3/2 or 4/2-way function, this port is not externally connected, acting as a sealed internal passage.⚠️ Important Model-Specific DetailsSpool Position Monitoring: The spool position is generally not monitored. Inductive position switches are available as an optional feature.Check Valve Insert: The valve can be ordered with an optional check valve insert if needed for the specific application.

Based on the official Bosch Rexroth documentation, a directional poppet valve of the M-SED series, size 10, directly matches your specified requirements. The valve provides a leak-free, pressure-compensated solution for high-pressure applications .✅ Product ConfirmationThe technical specifications for this valve type are confirmed by the manufacturer's data. The M-SED10 is a direct-operated directional seat valve with solenoid actuation . It is available as a 3/2 or 4/2-way version .Model Series: The M-SED10 covers direct-operated directional poppet valves with solenoid actuation.Nominal Size: Size 10 (NG10) .Maximum Flow: 40 l/min .Maximum Pressure: 350 bar .Solenoid Type: The valve uses a wet-pin DC solenoid with a detachable coil . The coil can be changed without opening the pressure-tight chamber .Porting Pattern: The interface conforms to the specified standards (DIN 24340 Form A, ISO 4401, and CETOP-RP 121H) .Manual Override: It features a concealed manual override for operation without power .Port TB Blind Hole: The designation of a blind hole on port TB is due to the valve's internal structure. In some configurations, this port is not externally connected, acting as a sealed internal passage.⚠️ Important Model-Specific DetailsSpool Position Monitoring: The spool position is generally not monitored. Inductive position switches are available as an optional feature .Check Valve Insert: The valve can be ordered with an optional check valve insert if needed for the specific application .

Based on the official Bosch Rexroth documentation, the M-.SEW series of directional poppet valves matches the specific parameters you have outlined. These direct-operated, solenoid-actuated valves use an air-gap solenoid design and feature a leak-free, pressure-compensated poppet system .✅ Product ConfirmationThe following technical specifications for the M-SEW 6 (NG6) valve have been confirmed:Valve Type: M-SEW – Directional poppet valve with solenoid actuation .Nominal Size: 6 (NG6) .Actuation: Solenoid operated (air-gap) with detachable coil .Maximum Flow: 25 L/min .Maximum Operating Pressure: 420/630 bar .Porting Pattern: Conforms to DIN 24340 Form A, ISO 4401, and CETOP - RP 121 H standards .⚠️ Important Details on Blind PortsThe port configurations you specified are typical for the 420 bar version of this valve series :Configuration Blind Ports2/2-Way Poppet Valves (420 bar version) Ports A and B are blind holes .3/2-Way Poppet Valves (420 bar version) Port B is a blind hole .This design blocks unused ports, ensuring leak-free sealing . As noted in the technical data, the 3/2 directional seat valves have a "negative spool overlap," so port T must always be connected . The concealed manual override is a standard feature on these valves .

Based on the official Bosch Rexroth documentation for the M-.SEW series, the technical specifications you have outlined for the M-SEW10 directional poppet valve are confirmed. This is a direct-operated directional seat valve with air-gap solenoid actuation .✅ Product Confirmation and SpecificationsThe following table summarizes the key parameters for this valve series .Parameter Specification for M-SEW10Valve Type M-SEW – Directional poppet valve with solenoid actuation Nominal Size 10 (NG10 / CETOP 5) Maximum Flow 40 l/min Maximum Operating Pressure 420 / 630 bar Actuation Solenoid operated (air-gap) with detachable coil Porting Pattern ISO 4401-05-04-0-05 Porting Pattern Also conforms to DIN 24340 Form A and CETOP - RP 121 H ⚠️ Important Details on Blind PortsThe port configurations you specified are accurate for this valve series and depend on the valve function and pressure version :Valve Function Pressure Version Blind Port(s)4/2-Way 420 bar Port TB is a blind hole .3/2-Way 420 bar Ports B and TB are blind holes .4/2-Way 630 bar Ports B and TB are not available .3/2-Way 630 bar Ports B and TB are not available .🔧 Additional Valve FeaturesLeak-Free Design: The blocked port closes leak-free, making it suitable for high-pressure and load-holding applications .Manual Override: Features a concealed manual override for operation without solenoid energization .Pressure-Compensated Design: The valve system is pressure-compensated, allowing reliable operation up to 630 bar .