Based on the search results, a Bosch Rexroth directional poppet valve matching your specifications is the KSDE.1 N (or similar KSDER type). This is a direct-operated, solenoid-actuated valve with two main connections (2/2-way) and is normally closed.The detailed specifications for this valve type are as follows:✅ Valve Specifications & Type CodeThe valve is identified by the type code structure KSDE.1 (or KSDER for the "R" pressure variant) with a component series "B" .Parameter Specification Source(s)Valve Type Directional seat valve (poppet), direct operated, solenoid actuated Main Connections 2 (2/2-way valve) Normal Position Normally closed (Symbol "N") Max. Operating Pressure ("R") 350 bar Max. Flow ("R") Up to 20 l/min (standard) / Up to 80 l/min (flow-optimized variant) Actuation Solenoid operated, wet-pin DC, with detachable coil Mounting Cavity Sun T-13A / R/T-13A (M20x1.5 thread) Design Features Leak-free blocking (poppet type), pressure-compensated Manual Override Optional (concealed or screwable) 🔧 Understanding the Type CodeThe type code KSDER.1 N B / H N0 V can be broken down as follows :KSDE: Directional seat valve, direct operated, electrically actuated.R: Maximum operating pressure 350 bar..1: Component size 1.N: Symbol N for normally closed.B: Component series B.H: High-performance and mounting cavity R/T-13A.N0: Without manual override. Options include N9 (concealed manual override) and N11 (screwable manual override) .V: FKM seals .Flow-Optimized Variant: A flow-optimized version of the "R" type (with a -17 suffix) is available, allowing for a higher flow of up to 80 l/min at the same 350 bar pressure .

Based on the search results, a Bosch Rexroth directional poppet valve matching your specifications is the KSDE.1 N (or similar KSDER type). This is a direct-operated, solenoid-actuated valve with two main connections (2/2-way) and is normally closed.The detailed specifications for this valve type are as follows:✅ Valve Specifications & Type CodeThe valve is identified by the type code structure KSDE.1 (or KSDER for the "R" pressure variant) with a component series "B" .Parameter Specification Source(s)Valve Type Directional seat valve (poppet), direct operated, solenoid actuated Main Connections 2 (2/2-way valve) Normal Position Normally closed (Symbol "N") Max. Operating Pressure ("R") 350 bar Max. Flow ("R") Up to 20 l/min (standard) / Up to 80 l/min (flow-optimized variant) Actuation Solenoid operated, wet-pin DC, with detachable coil Mounting Cavity Sun T-13A / R/T-13A (M20x1.5 thread) Design Features Leak-free blocking (poppet type), pressure-compensated Manual Override Optional (concealed or screwable) 🔧 Understanding the Type CodeThe type code KSDER.1 N B / H N0 V can be broken down as follows :KSDE: Directional seat valve, direct operated, electrically actuated.R: Maximum operating pressure 350 bar..1: Component size 1.N: Symbol N for normally closed.B: Component series B.H: High-performance and mounting cavity R/T-13A.N0: Without manual override. Options include N9 (concealed manual override) and N11 (screwable manual override) .V: FKM seals .Flow-Optimized Variant: A flow-optimized version of the "R" type (with a -17 suffix) is available, allowing for a higher flow of up to 80 l/min at the same 350 bar pressure .

Based on the official Bosch Rexroth technical documentation, a direct-operated solenoid poppet valve (Type KSDE) with the specifications you described is identified by the type code KSDE R 1 P B / H N0 V .This valve has two main connections, is normally open ("P" spool), and is rated for 350 bar (the "R" pressure variant). Key technical specifications are confirmed in the table below.✅ Valve SpecificationsParameter Specification Source(s)Valve Type KSDE (2/2 directional seat valve, direct operated, solenoid actuated) Max. Operating Pressure 350 bar (Version R) Normal Position Normally open (Symbol P) Main Connections 2 Max. Flow Rate 20 l/min (standard R version) or up to 60 l/min (flow-optimized variant) Actuation Direct operated, solenoid actuated (wet-pin) Component Size 1 Component Series B Mounting Cavity R/T-13A (Sun T-13A compatible) 🔧 Understanding the Type CodeYour specifications translate into the type code KSDE R 1 P B / H N0 V, which breaks down as follows :KSDE: Directional seat valve, direct-operated, electrically actuated .R: Maximum operating pressure 350 bar .1: Component size 1 .P: Symbol P, Normally open .B: Component series B .H: Mounting cavity R/T-13A .N0: Without auxiliary (manual) actuation .V: FKM seals .The "R" pressure rating for the KSDE series has a standard maximum flow of 20 l/min, with a flow-optimized variant (R...-17) that can reach up to 60 l/min . The normally open state ("P") means flow is blocked when the solenoid is energized .

Based on the official Bosch Rexroth technical documentation, a direct-operated solenoid poppet valve (Type KSDE) with the specifications you described is identified by the type code KSDE R 1 P B / H N0 V .This valve has two main connections, is normally open ("P" spool), and is rated for 350 bar (the "R" pressure variant). Key technical specifications are confirmed in the table below.✅ Valve SpecificationsParameter Specification Source(s)Valve Type KSDE (2/2 directional seat valve, direct operated, solenoid actuated) Max. Operating Pressure 350 bar (Version R) Normal Position Normally open (Symbol P) Main Connections 2 Max. Flow Rate 20 l/min (standard R version) or up to 60 l/min (flow-optimized variant) Actuation Direct operated, solenoid actuated (wet-pin) Component Size 1 Component Series B Mounting Cavity R/T-13A (Sun T-13A compatible) 🔧 Understanding the Type CodeYour specifications translate into the type code KSDE R 1 P B / H N0 V, which breaks down as follows :KSDE: Directional seat valve, direct-operated, electrically actuated .R: Maximum operating pressure 350 bar .1: Component size 1 .P: Symbol P, Normally open .B: Component series B .H: Mounting cavity R/T-13A .N0: Without auxiliary (manual) actuation .V: FKM seals .The "R" pressure rating for the KSDE series has a standard maximum flow of 20 l/min, with a flow-optimized variant (R...-17) that can reach up to 60 l/min . The normally open state ("P") means flow is blocked when the solenoid is energized .

Based on the official Bosch Rexroth technical documentation, a directional spool valve with the B spool symbol (Type 4WE6B) matches your specifications for a size 6, solenoid-operated valve with wet-pin solenoids.The 'B' designation indicates the spool symbol, which defines the specific fluid flow paths when the valve is actuated. A product listing confirms a model with the "B" spool is a 3-way, 2-position (3/2) valve, featuring three ports and two switching positions.Key performance parameters confirmed for this valve series include the maximum flow and pressure ratings you specified, compliant with the listed porting standards.✅ Confirmed Technical SpecificationsParameter Specification Source(s)Valve Type WE – Directional spool valve, solenoid-operated Nominal Size 6 (NG6 / CETOP 3 / ISO 4401) Spool Type B (3/2-way) Maximum Flow (DC) 80 L/min Maximum Operating Pressure 350 bar (at ports P, A, B) Actuation Solenoid operated (wet-pin) Porting Pattern DIN 24340 Form A, ISO 4401-03-02-0-05, NFPA D03 🔧 Understanding the Valve DesignThe valve uses a control spool moved by one or two wet-pin solenoids, which are immersed in hydraulic fluid for quiet operation, good heat dissipation, and long service life.In the de-energized state, the spool is held in its central or initial position by return springs.When a solenoid is energized, it pushes the spool to direct flow according to the hydraulic symbol, enabling reliable switching of the oil flow direction.

Based on the Bosch Rexroth technical documentation for the CGH1 series, the configuration you specified—a mill-type double rod cylinder (CGH1) with MF3 mounting (round flange at the head end), a 320 mm bore, and a 1500 mm stroke—is a standard offering within the series .The CGH1 series is designed for a nominal pressure of 250 bar .📊 Key Technical SpecificationsFor your 320 mm bore cylinder, the standard piston rod diameter is 220 mm . Below are the key technical specifications derived from the official Rexroth catalogs.Parameter SpecificationCylinder Series CGH1 (Double Rod Cylinder, Series H1) Nominal Pressure 250 bar (25 MPa) Piston Diameter (ØAL) 320 mm Piston Rod Diameter (ØMM) 200 mm or 220 mm Mounting Type MF3 (Round Flange at Cylinder Head) Stroke Length 1500 mm (max up to 6000 mm) 📐 Key MF3 Mounting Dimensions (320 mm Bore)The following table shows critical dimensions for the MF3 mounting style with your specified bore size, as per the official dimension tables .Dimension Value (mm)Piston Rod Thread (KK) M180x4 Flange Diameter (D) 490 Flange Hole Circle (DA) 406 Port Thread (EE) G 1 1/2 Note on Ordering Code: A complete Rexroth ordering code for this cylinder would follow a structure like CGH1MF3/320/220/1500A3X/B11... . It is recommended to verify the required piston rod diameter and specify any additional options to complete the order code.

Mill Type Cylinder - Double Rod Cylinder(CG) - (BOSCH , Rexroth) Range H1. - CGH1 MS2 (Foot Mounting).

The CGH1 MS2 is a standard, heavy-duty double-rod cylinder from Bosch Rexroth, built to meet the demands of high-pressure industrial applications . The configuration you specified—a 320 mm bore and 1500 mm stroke—is a valid standard variant within the series .Technical Specifications and CompatibilityThis cylinder is designed for a nominal pressure of 250 bar . The MS2 code denotes a foot mounting style, suitable for rigid, fixed installations . For a 320 mm piston, the standard piston rod diameter can be selected from options ranging from 22 mm to 220 mm .Ordering Code ReferenceA complete Rexroth ordering code follows a structure like CGH1MS2/320//1500A3X/B11..., where you would specify the exact piston rod diameter (e.g., 220mm) and other options like cushioning and seal type .

The Rexroth CGH1 MT4 you specified is a standard heavy-duty mill-type cylinder with a trunnion mounting, and it is capable of supporting your requested 320 mm bore and 1500 mm stroke.📊 Technical Specifications & DimensionsThe following table compiles the key specifications for your cylinder configuration from the official Bosch Rexroth documentation .Parameter Specification for 320mm Bore / MT4 MountingCylinder Series CGH1 (Mill Type Double Rod Cylinder) Mounting Style MT4 – Trunnion mount Nominal Pressure 250 bar (25 MPa) Piston Diameter (ØAL) 320 mm Piston Rod Diameter (ØMM) 200 mm or 220 mm (Standard options) Stroke Length 1500 mm (Series max up to 6000 mm) Trunnion Position (XV) 431 mm (From the cylinder base) Retracted Length (ZP) Determined by stroke, rod diameter, and optionsKey Dimension Data (MT4) :Piston Rod Thread (KK): M160x4Port Thread (EE): G1 1/2Trunnion to Head (X1): 243 mmTrunnion Diameter (D): 490 mm⚙️ Important Ordering NotesTrunnion Position: The XV dimension (trunnion position from the cylinder base) is freely selectable. You must specify this value in plain text when ordering . The value shown in the table (431 mm) is the standard position for a 320mm piston as per the dimension table, but you should confirm it fits your machine's geometry.Ordering Code: Your complete Rexroth ordering code would follow a structure like CGH1MT4/320//1500A3X/B11.... You must specify the piston rod diameter (choose 200 or 220 mm) and other options like cushioning and seal type to complete the order .

Based on the available information, the KSDER1CB/HN11V (or KSDER1CB/HN0V) valve matches your specified requirements: a KSDE type solenoid-operated directional poppet valve with the "C" spool symbol and 3 main connections.✅ Confirmed Technical SpecificationsParameter Specification Source(s)Valve Type KSDE, directional seat valve, direct-operated Component Size 1 Component Series B Spool Symbol C Main Connections 3 (3/2-way) Normal Position Normally closed (NC) Max. Operating Pressure ("R") 350 bar Max. Flow Rate 20 L/min Mounting Cavity R/T-11A Standard High Performance (HP) 🔧 Understanding the Ordering CodeThe type code for the "C" spool variant is structured as follows based on official Rexroth data :KSDE: Directional seat valve, direct-operated, electrically actuated R: Maximum operating pressure 350 bar 1: Component size 1 C: Spool symbol C (Normally closed, 3 main connections) B: Component series B H: High-Performance and mounting cavity R/T-11A N0 or N11: Manual override option (N0 = without, N11 = screwable) V: FKM seals A product listing for the KSDER1CB/HN11V confirms this exact model with the "C" spool and a screwable manual override . The option with a concealed manual override, KSDER1CB/HN0V, is also documented .

The Bosch Rexroth valve matching your specified configuration is the KSDE R 1 N B / H... series. This is a direct-operated, solenoid-actuated 2/2 directional poppet valve that is normally closed with 2 main connections (2-way valve).✅ Confirmed Technical SpecificationsParameter Specification Source(s)Valve Type KSDE – Directional seat valve, direct-operated, solenoid actuated Component Size 1 Component Series B Spool Symbol N – Normally closed Main Connections 2 (2/2-way) Max. Operating Pressure ("R") 350 bar Max. Flow Rate 20 L/min Mounting Cavity R/T-13A 🔧 Understanding the Ordering CodeYour specifications translate into the type code KSDE R 1 N B / H..., which breaks down as follows:KSDE: Directional seat valve, direct-operated, electrically actuatedR: Maximum operating pressure 350 bar1: Component size 1N: Spool symbol N – Normally closed (2 main connections)B: Component series BH: High Performance and mounting cavity R/T-13AManual Override Options (part of the ordering code):N0: Without manual overrideN9: With concealed manual overrideN11: With screwable manual overrideThe valve is pressure-compensated and provides leak-free blocking when in the closed position. Important: Flow is only permitted in the direction of the arrow shown in the symbol.