Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Sigle Rod Cylinder. - Range HVBS , 08.

The correct Rexroth ordering code for the HVBS single-rod cylinder with your specified dimensions is HVBS 08 F, where F is the standard stroke code for 63 mm .✅ Correct Ordering Code BreakdownThe following table breaks down the correct ordering code based on the official Rexroth specifications:Component Code DescriptionType HVBS Standard differential cylinder (single rod, without sensor rod) Range 08 Piston diameter 80 mm, Piston rod diameter 45 mm Stroke Code F Standard stroke length of 63 mm The F1 code you provided for the stroke is not a standard option in the official Rexroth documentation. The standard codes are single letters: A=5mm, B=10mm, C=16mm, D=25mm, E=40mm, F=63mm, G=100mm, and H=160mm .

Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Sigle Rod Cylinder. - Range HVBS , 08.

The correct Rexroth ordering code for the HVBS single-rod cylinder with your specified dimensions is HVBS 08 F, where F is the standard stroke code for 63 mm .✅ Correct Ordering Code BreakdownThe following table breaks down the correct ordering code based on the official Rexroth specifications:Component Code DescriptionType HVBS Standard differential cylinder (single rod, without sensor rod) Range 08 Piston diameter 80 mm, Piston rod diameter 45 mm Stroke Code F Standard stroke length of 63 mm The F1 code you provided for the stroke is not a standard option in the official Rexroth documentation. The standard codes are single letters: A=5mm, B=10mm, C=16mm, D=25mm, E=40mm, F=63mm, G=100mm, and H=160mm .

Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Sigle Rod Cylinder. - Range HVBS , 08.

The correct Rexroth ordering code for the HVBS single-rod cylinder with your specified dimensions is HVBS 08 F, where F is the standard stroke code for 63 mm .✅ Correct Ordering Code BreakdownThe following table breaks down the correct ordering code based on the official Rexroth specifications:Component Code DescriptionType HVBS Standard differential cylinder (single rod, without sensor rod) Range 08 Piston diameter 80 mm, Piston rod diameter 45 mm Stroke Code F Standard stroke length of 63 mm The F1 code you provided for the stroke is not a standard option in the official Rexroth documentation. The standard codes are single letters: A=5mm, B=10mm, C=16mm, D=25mm, E=40mm, F=63mm, G=100mm, and H=160mm .

Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Sigle Rod Cylinder. - Range HVBS , 08.

The correct Rexroth ordering code for the HVBS single-rod cylinder with your specified dimensions is HVBS 08 F, where F is the standard stroke code for 63 mm .✅ Correct Ordering Code BreakdownThe following table breaks down the correct ordering code based on the official Rexroth specifications:Component Code DescriptionType HVBS Standard differential cylinder (single rod, without sensor rod) Range 08 Piston diameter 80 mm, Piston rod diameter 45 mm Stroke Code F Standard stroke length of 63 mm The F1 code you provided for the stroke is not a standard option in the official Rexroth documentation. The standard codes are single letters: A=5mm, B=10mm, C=16mm, D=25mm, E=40mm, F=63mm, G=100mm, and H=160mm .

Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Sigle Rod Cylinder. - Range HVBS , 08.

The correct Rexroth ordering code for the HVBS single-rod cylinder with your specified dimensions is HVBS 08 F, where F is the standard stroke code for 63 mm .✅ Correct Ordering Code BreakdownThe following table breaks down the correct ordering code based on the official Rexroth specifications:Component Code DescriptionType HVBS Standard differential cylinder (single rod, without sensor rod) Range 08 Piston diameter 80 mm, Piston rod diameter 45 mm Stroke Code F Standard stroke length of 63 mm The F1 code you provided for the stroke is not a standard option in the official Rexroth documentation. The standard codes are single letters: A=5mm, B=10mm, C=16mm, D=25mm, E=40mm, F=63mm, G=100mm, and H=160mm .

Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Sigle Rod Cylinder. - Range HVBS , 08.

The correct Rexroth ordering code for the HVBS single-rod cylinder with your specified dimensions is HVBS 08 F, where F is the standard stroke code for 63 mm .✅ Correct Ordering Code BreakdownThe following table breaks down the correct ordering code based on the official Rexroth specifications:Component Code DescriptionType HVBS Standard differential cylinder (single rod, without sensor rod) Range 08 Piston diameter 80 mm, Piston rod diameter 45 mm Stroke Code F Standard stroke length of 63 mm The F1 code you provided for the stroke is not a standard option in the official Rexroth documentation. The standard codes are single letters: A=5mm, B=10mm, C=16mm, D=25mm, E=40mm, F=63mm, G=100mm, and H=160mm .

Based on the search results, here is the information for the Rexroth Type WN directional spool valve with pneumatic (fluidic) actuation at a pilot pressure of 1.5 to 6 bar.🔧 Valve OverviewThe Type WN valve is a direct-operated directional spool valve that uses fluidic (pneumatic) actuation. This means it is controlled by applying a pilot pressure to a hydraulic cylinder integrated into the valve . These valves are used to control the start, stop, and direction of a hydraulic fluid flow .⚙️ Technical SpecificationsFor the WN 10 (size 10) variant, which is the most documented in the search results, the key specifications are as follows:Parameter SpecificationValve Type WN - Directional spool valve with fluidic actuation Actuation Pneumatic (Hydraulic pilot pressure) Pilot Pressure Range 1.5 ... 10 bar (Your specified 1.5 to 6 bar falls within this range) Nominal Size 10 (NG10 / CETOP 5) Maximum Operating Pressure 350 bar (Ports P, A, B) Maximum Flow 160 l/min Porting Pattern ISO 4401-05-04-0-05 Seals NBR (standard) or FKM 🔄 Spool Symbols and Valve ConfigurationsThe valve is available in a variety of spool symbols (A, B, C, D, etc.), including the Y-Spool you mentioned, to provide different flow path configurations . It is available in 4/3, 4/2, and 3/2-way versions, meaning it can have either three or four main ports and two or three switching positions . The specific spool symbol is selected as part of the ordering code .

Based on the official Bosch Rexroth technical documentation, a Type WMR roller-operated directional spool valve in NS6 directly meets your specifications for maximum flow and pressure, as well as the required porting patterns .The valve is a direct-operated directional spool valve, available in 4/3, 4/2, and 3/2-way versions .Technical SpecificationsThe following specifications are confirmed for the WMR valve family in NS6.Parameter Specification Source(s)Valve Type WMR - Directional spool valve, roller plunger actuated Nominal Size (NS) 6 (NG6 / CETOP 3) Maximum Operating Pressure 315 bar (at ports P, A, B) Maximum Flow (Qmax) 60 L/min Actuation Roller plunger Porting Pattern DIN 24340 Form A, ISO 4401-03-02-0-05, CETOP-RP 121 H Understanding Spool TypesThe valve is available with a variety of spool symbols (A, B, C, etc.) to provide different flow path configurations and circuit functions . The letter in the model number, such as 3WMR6B5X/, denotes the specific spool type . A detailed list of available symbols can be found in the manufacturer's documentation .Operational NotesDetent: Directional valves with a roller plunger (WMR) are generally designed without a detent mechanism, meaning the spool does not lock into position and will return to the starting position once the actuating force is removed .Port T Pressure: It is important to note that for the WMR valve, the port T (return) has a lower maximum pressure rating of 60 bar .

Based on the official Bosch Rexroth technical documentation, a Type WMR roller-operated directional spool valve in NS6 directly meets your specifications for maximum flow and pressure, as well as the required porting patterns .The valve is a direct-operated directional spool valve, available in 4/3, 4/2, and 3/2-way versions .Technical SpecificationsThe following specifications are confirmed for the WMR valve family in NS6.Parameter Specification Source(s)Valve Type WMR - Directional spool valve, roller plunger actuated Nominal Size (NS) 6 (NG6 / CETOP 3) Maximum Operating Pressure 315 bar (at ports P, A, B) Maximum Flow (Qmax) 60 L/min Actuation Roller plunger Porting Pattern DIN 24340 Form A, ISO 4401-03-02-0-05, CETOP-RP 121 H Understanding Spool TypesThe valve is available with a variety of spool symbols (A, B, C, etc.) to provide different flow path configurations and circuit functions . The letter in the model number, such as 3WMR6B5X/, denotes the specific spool type . A detailed list of available symbols can be found in the manufacturer's documentation .Operational NotesDetent: Directional valves with a roller plunger (WMR) are generally designed without a detent mechanism, meaning the spool does not lock into position and will return to the starting position once the actuating force is removed .Port T Pressure: It is important to note that for the WMR valve, the port T (return) has a lower maximum pressure rating of 60 bar .

Based on the official Rexroth technical documentation, your specified Type WMM valve in NG6 size is confirmed. This direct-operated directional spool valve is designed with a hand lever for reliable manual control of hydraulic flow direction and meets your key specifications: a maximum operating pressure of 315 bar, a flow rate of 60 L/min, and porting patterns compliant with DIN 24340 Form A and ISO 4401 .⚙️ Product SpecificationsYour requirements match the established technical data for the WMM series (NG6).Parameter Specification Source(s)Valve Type WMM - Manual directional spool valve Nominal Size (NS) 6 (NG6 / CETOP 3) Maximum Operating Pressure 315 bar (at P, A, B ports) Maximum Flow (Qmax) 60 L/min Actuation Hand lever Porting Pattern DIN 24340 Form A, ISO 4401-03-02-0-05, CETOP-RP 121H 🔧 Understanding Spool Types and OrderingThe valve is available in a variety of spool symbols (A, B, C, etc.) to provide different flow configurations and circuit functions (e.g., 4/3, 4/2, 3/2-way). The letter in the model number, such as 4WMM6D6X, denotes the specific spool type .A key variant is the detent version, indicated by /F in the model number (e.g., 4WMM6D5X/F). This locks the spool in each position for stable, hands-free operation . A typical ordering code follows the structure: 4WMM 6 6X/... . A notable operational note is that port T (return) has a significantly lower pressure rating of 160 bar .