The LFA..E control cover from Bosch Rexroth is designed for directional control functions with electrical monitoring of the closed position. It is typically used with a 2-way cartridge valve and provides a binary electrical feedback signal for safety and position verification functions.🔧 Design and FunctionThe E designation indicates a control cover with spool position monitoring, which uses an inductive position switch to directly monitor the closed position of the valve spool. This provides a reliable electrical signal that confirms the valve is in its safe, closed state .Key aspects of this design:No Dynamic Seals: The position switch operates without dynamic seals, contributing to a long life cycle and high reliability .M12 Connection: The electrical connection is typically via a 4-pole M12 connector, with standard 24 V DC PNP transistor outputs .Safety Application: The valve is suitable for safety-relevant controls but must be assembled and commissioned by trained specialists .📋 Key Technical Specifications (NS 25)The following specifications apply to LFA25E cover variants:Specification DetailType LFA25E (Control Cover) Function Directional Control with Electrical Spool Position MonitoringNominal Size (NS) 25 (NG25) Component Series 7X Max. Operating Pressure 350 bar (for most variants) Mounting Standard DIN ISO 7368 / ISO 4401 Spool Monitoring Inductive position switch type QM / Q6 Voltage 24 V DC Output PNP transistor output, 400 mA Remote Control Port G 1/4 (for LFA25) This cover is the typical choice when reliable confirmation of the valve's closed position is required by the machine control system. If you need more specific details, such as the exact pin assignment or installation dimensions, please let me know.

The LFA25D-7X control cover from Bosch Rexroth is designed for directional control functions. In this context, the "D" designation identifies it as a control cover with a remote control connection. This style is also available for other nominal sizes, such as NS16, NS32, and NS40.🔧 Function in the LC/LFA SystemThe LFA control cover serves as the "brain" of the LC/LFA cartridge valve system. Mounted directly onto the power section (the LC cartridge), the cover contains the necessary pilot oil connections that dictate the valve's behavior. Selecting a cover with the "D" function transforms the cartridge valve into a unit that can be piloted or operated remotely via a connected pilot valve or control circuit.📋 Key Technical Specifications (LFA25D)The following specifications are based on data for the LFA25D variant from product listings and technical documentation.Specification DetailType LFA25D (Control Cover)Function Directional Control with Remote Control ConnectionNominal Size 25 (NG25)Component Series 7XMax. Operating Pressure Up to 350 barMounting Standard ISO (Standardized receiving hole)Remote Control Port G1/4The "D" cover enables flexible remote piloting of the logic element for directional functions. If you need further details, such as compatible pilot valves or installation dimensions, please let me know.

⚙️ VPDPVE16F - Product IdentificationBased on available search results, "VPDPVE16F" does not appear to be an exact match for a standard HOERBIGER product code. The most likely match is a variant of the VPDBVE16 series.The VPDBVE16 is a proportional pressure relief valve manufactured by HOERBIGER (also associated with HAWE Hydraulik) . It is designed for precise, continuous pressure adjustment in hydraulic systems, controlled by an electrical input signal .📊 Technical Specifications (for VPDBVE16 Series)The following general specifications apply to the VPDBVE16 series. The final "F" in your query may denote a specific pressure range or special configuration.Specification DetailType VPDBVE16 (Proportional Pressure Relief Valve) Manufacturer HOERBIGER / HAWE Hydraulik Max. Flow Rate 150 l/min Max. Pressure 350 bar Weight Approx. 2 - 3 kg Size VE16 🔧 Available Pressure Variants (VPDBVE16)The standard VPDBVE16 series is available in several pressure ranges, identified by a suffix letter . Your "F" suffix may be a similar variant:Suffix Pressure RangeA 5 - 70 bar B 8 - 140 bar C 10 - 210 bar D 15 - 280 bar E 20 - 350 bar

VDBE03EB hydraulic pressure relief valve manufactured by HOERBIGER HAWE.

The VDBE03EB is a hydraulic pressure relief valve manufactured by HOERBIGER HAWE. This is a compact, screw-in cartridge valve designed for direct control and monitoring of system pressure.📊 Technical SpecificationsSpecification DetailType VDBE03EBFunction Pressure Relief Valve (directly controlled)Manufacturer HOERBIGER / HOERBIGER HAWEConnection M20x1.5 / 15H8Max. Operating Pressure 350 barPressure Range 10 - 140 barMax. Flow Rate 10 L/minWeight Approx. 0.12 - 0.15 kgIf you need details on the ordering code breakdown or compatible accessories, feel free to ask.

HOERBIGER HAWE PIL series proportional directional valve.

The PIL500PC06P12 is a HOERBIGER HAWE PIL series proportional directional valve, designed for precise control of oil flow in hydraulic systems.⚙️ Key technical specificationsBased on product data and related model documentation, here are its confirmed and likely specifications:Parameter ValueType PIL500PC06P12 (also listed with type code HV06452)Function Proportional directional valve with electrical actuationMax. Operating Pressure 350 barMax. Flow Rate 12 L/minVoltage 24 V DCNominal Current 0.8 APower Consumption 14 WHydraulic Connection Subplate mounting (NG06 / CETOP 03)Weight Approx. 2.5 kg🔧 Interpreting the model codeThe model number breaks down as follows:PIL: Indicates the valve is a proportional directional spool valve with an inductive position transducer (electrical position feedback).500: Likely a series identifier.PC06: Refers to the NG06 (nominal size 6) mounting standard.P12: Indicates a maximum flow rate of 12 L/min.

The HOERBIGER IVN221/222 BE12 is a 2/2-way directional poppet valve, a type of hydraulically pilot-operated screw-in cartridge valve designed for reliable on/off control in high-pressure systems .It is built with a poppet (seat) design that ensures it is leak-free in the closed position, making it suitable for functions like load holding and motion control .📊 Technical SpecificationsSpecification Detail SourceType IVN 221 / 222 (Pilot-operated poppet valve) Design Screw-in cartridge valve, size 12 Function 2/2-way directional seated valve (Normally closed) Max. Operating Pressure 350 bar Nominal Flow Rate 100 L/min Voltage (BE12 variant) 24 V DC Power Consumption 26 W Position Sensor Inductive position monitoring (via M12x1, 4-pin sensor plug) Protection Class IP65 (with plug connected) Hydraulic Fluid Mineral oil (DIN 51524); other media on request Viscosity Range 10 to 600 mm²/s Fluid Temperature -25 °C to +70 °C Weight Approx. 0.6 - 0.7 kg 🔧 Key Features and ApplicationsInductive Position Sensing: The valve includes an inductive position switch that monitors the closed position, providing a reliable signal for control systems . The electrical connection is a standard M12x1, 4-pin connector .Leak-Free Design: The cone-seat design provides a tight seal in the closed switching position .Common Applications: Typical uses include press brakes, machine tools, and general handling and assembly equipment .If you need more specific details, such as the exact ordering code breakdown or pin assignment for the sensor plug, just let me know.

Based on the search results, a "directly controlled hydraulic slide valve with position sensing" is a high-precision component widely used in industrial automation. This type of valve is also commonly referred to as a direct-operated proportional directional valve with electrical position feedback.🔧 Core Technology: How It WorksThe defining feature of these valves is an internal closed-loop control system that ensures precise and reliable operation.Direct Operation: An electrical signal directly actuates the valve spool (slide) without the need for a separate pilot stage, allowing for fast response times.Position Sensing & Feedback: An inductive position transducer (LVDT) or similar sensor continuously monitors the spool's actual position. This information is fed back to an electronic controller to achieve high accuracy.🏭 Product Examples & ApplicationsSeveral manufacturers offer valves with these features, each tailored for specific applications.Bosch Rexroth 4WRPH6: This is a high-response valve with external piston position feedback and external electronics, designed for applications requiring servo quality performance and quick response times.Bosch Rexroth 4WRPEH: A direct-operated valve with electrical position feedback and integrated electronics (OBE). These valves are used in industrial hydraulic systems for precise control.Duplomatic DSE5J: A direct-operated proportional directional valve with on-board electronics and position feedback, used to control the position and speed of hydraulic actuators.Moog D92x Series: These servo-proportional valves utilize position sensing to convert an electrical input signal into a spool position, which is then used to control hydraulic flow. The D926 and D927 are part of this series.📊 Key Technical SpecificationsWhile exact specifications vary by model, here are common parameters based on the search results:Operation: Direct-operated with electrical position feedback and inte

Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Differential Cylinder With Piston Rod For Positioning - Range HVBD , 05.

Here are the specifications and hashtags for the Bosch Rexroth HVBD tie-rod cylinder, based on technical documentation for the series .📋 Cylinder Specifications & Ordering CodeThe cylinder is a differential cylinder with a sensor rod (HVBD) for positioning applications, built to CNOMO standards. The ordering code is constructed as follows :Component Designation/Value DescriptionType HVBD Differential cylinder with a sensor rod for position measurement Range 05 Piston diameter 50 mm and piston rod diameter 28 mm Stroke Code D Standard stroke length of 25 mm 📊 Key Technical SpecificationsParameter Value / DescriptionNominal Pressure 200 bar (20 MPa) Standards CNOMO 05.07.65 to 05.07.70 Piston Diameter (ØAL) 50 mmPiston Rod Diameter (ØMM) 28 mmStroke (D) 25 mmDesign Tie-rod design; without end position cushioning .

Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Differential Cylinder With Piston Rod For Positioning - Range HVBD , 05.

Here are the specifications and hashtags for the Bosch Rexroth HVBD tie-rod cylinder, based on technical documentation for the series .📋 Cylinder Specifications & Ordering CodeThe cylinder is a differential cylinder with a sensor rod (HVBD) for positioning applications, built to CNOMO standards. The ordering code is constructed as follows :Component Designation/Value DescriptionType HVBD Differential cylinder with a sensor rod for position measurement Range 05 Piston diameter 50 mm and piston rod diameter 28 mm Stroke Code D Standard stroke length of 25 mm 📊 Key Technical SpecificationsParameter Value / DescriptionNominal Pressure 200 bar (20 MPa) Standards CNOMO 05.07.65 to 05.07.70 Piston Diameter (ØAL) 50 mmPiston Rod Diameter (ØMM) 28 mmStroke (D) 25 mmDesign Tie-rod design; without end position cushioning .

Tie Rod Cylinder To CNOMO - Rexroth - BOSCH - Differential Cylinder With Piston Rod For Positioning - Range HVBD , 05.

Here are the specifications and hashtags for the Bosch Rexroth HVBD tie-rod cylinder, based on technical documentation for the series .📋 Cylinder Specifications & Ordering CodeThe cylinder is a differential cylinder with a sensor rod (HVBD) for positioning applications, built to CNOMO standards. The ordering code is constructed as follows :Component Designation/Value DescriptionType HVBD Differential cylinder with a sensor rod for position measurement Range 05 Piston diameter 50 mm and piston rod diameter 28 mm Stroke Code D Standard stroke length of 25 mm 📊 Key Technical SpecificationsParameter Value / DescriptionNominal Pressure 200 bar (20 MPa) Standards CNOMO 05.07.65 to 05.07.70 Piston Diameter (ØAL) 50 mmPiston Rod Diameter (ØMM) 28 mmStroke (D) 25 mmDesign Tie-rod design; without end position cushioning .