The cylinder you are looking for is a HVBS type, which is a single rod, differential cylinder without a sensor rod.Based on the official Rexroth documentation, here are the specifications for your requested cylinder:Ordering Code BreakdownComponent Designation/Value DescriptionHVBS Type of Cylinder Differential cylinder (single rod, without sensor rod)03 Range Piston diameter 32 mm and piston rod diameter 18 mmA Stroke Code Standard stroke length of 5 mmK14 Electrical Connection Connector according to DIN EN 175301-803, without mating connector. This is a standard option from the ordering code.The A1 designation you requested is not a standard code. The official table shows the stroke code is simply A for 5 mm. The K14 is added for the electrical connection type.Key Technical SpecificationsNominal Pressure: 200 bar (20 MPa)Standard: CNOMO 05.07.65 to 05.07.70Piston Diameter (ØAL): 32 mmPiston Rod Diameter (ØMM): 18 mmStroke: 5 mmEnd Position Cushioning: WithoutPiston Rod End Thread (KK): M12 x 1.25

Based on the official Bosch Rexroth documentation, a self-aligning clevis (swivel head) with an internal bush diameter (CN) of 10 mm for a CD70 cylinder with a 25 mm piston is the CGK 10.Product SpecificationsThe CGK 10 swivel head is the correct accessory for the CD70 cylinder series . The key specifications for this component are listed below .Parameter Specification for CGK 10Type CGK 10 Material No. R900001653 Internal Bush Diameter (ØCN) 10 mm Thread (KK) M10 Weight (approx.) 0.07 kg Static Load Rating (C0) 17.6 kN Max. Admissible Load (Fadm) 5.8 kN Misalignment Angle (Z) 12 ... 15° Note: The document specifies that the CGK 10 is "Cannot be re-lubricated" .CompatibilityThe CGK 10 is specifically documented as part of the accessory range for the CD70 and CG70 cylinder series . The CD70 series has a nominal pressure of 70 bar <7> with piston diameters ranging from 25 to 200 mm , confirming it is the correct component for your specified CD70 cylinder with a 25 mm piston diameter.The standard for this swivel head is ISO 12240-4 .

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=12 mm.

Based on the official Bosch Rexroth documentation, the self-aligning clevis (swivel head) you're looking for is the CGK 12, which has an internal bush diameter (CN) of 12 mm .This is confirmed to be the correct accessory for a CD70 cylinder with a 32 mm piston diameter .✅ Product SpecificationsThe table below lists the key specifications for the CGK 12 swivel head, as detailed in the Rexroth technical data sheets .Parameter SpecificationType CGK 12Material No. R900001327Internal Bush Diameter (CN) 12 mmThread (KK) M12Weight 0.1 kgStatic Load Rating (C₀) 24.5 kNMax. Admissible Load (Fadm) 8.1 kNMisalignment Angle (Z) 10° - 11°🔧 Compatibility & NotesThe CGK 12 is specifically designed for the CD70, CG70, CD210, and CG210 cylinder series .📌 Installation Note: The self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque .

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=15 mm.

Based on the Bosch Rexroth documentation, the self-aligning clevis for a CD70 or CD210 cylinder with a 40 mm piston diameter is the CGK 15, featuring an internal bush diameter (CN) of 15 mm.✅ Product DetailsType: CGK 15Internal Bush Diameter (CN): 15 mmCompatibility: Suitable for the CD70 and CD210 cylinder ranges.Standard: Manufactured to ISO 12240-4.📊 Key Specifications (CGK 15)Material No.: R900001328Thread (KK): M14Weight: 0.16 kgStatic Load Rating (C₀): 36 kNMax. Admissible Load (Fadm): 11.9 kNMisalignment Angle (Z): 8° - 12°📌 Installation Note: The self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque.

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=20 mm.

Based on the official Bosch Rexroth technical documentation, the self-aligning clevis (swivel head) you are looking for is the CGK 20. This component has an internal bush diameter (CN) of 20 mm and is designed for the CD70 and CD210 cylinder series.The following table provides the key technical specifications for the CGK 20, which is manufactured to ISO 12240-4 standards.Parameter Specification for CGK 20Type CGK 20Internal Bush Diameter (ØCN) 20 mmMaterial Number R900001329Thread (KK) M20 x 1.5Weight (approx.) 0.34 kgStatic Load Rating (C₀) 60 kNMax. Admissible Load (Fadm) 19.8 kNMisalignment Angle (Z) 9°

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=25 mm.

The self-aligning clevis you're looking for, with a 25 mm internal bush diameter (CN), is the CGK 25.This component is compatible with both the CD70 / CG70 and CD210 / CG210 cylinder series.Here are the key specifications for the CGK 25:Material No.: R900001330Internal Bush Diameter (CN): 25 mmThread (KK): M24 x 2Weight: 0.6 kgStatic Load Rating (C₀): 83 kNMax. Admissible Load (Fadm): 27.4 kNMisalignment Angle (Z): 7°

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=30 mm.

The self-aligning clevis for the specified requirements is the CGK 30.This is confirmed by the official Bosch Rexroth technical documentation, which shows the CGK 30 as the swivel head (Gelenkkopf) designated for the CD70, CG70, CD210, and CG210 cylinder series with the corresponding internal bush diameter.The component is manufactured to the ISO 12240-4 standard.Here are the key technical specifications for the CGK 30 from the Rexroth catalog:Parameter SpecificationType CGK 30Material Number R900001331Internal Bush Diameter (ØCN) 30 mmThread (KK) M30 x 2Weight (m) 0.9 kgStatic Load Rating (C₀) 110 kNMax. Admissible Load (Fadm) 36.3 kNMisalignment Angle (Z) 6°Max. Overall Length (L3) 149 mmWidth (B1) 22 mmNote on lubrication: The source material indicates this version "Cannot be re-lubricated" .

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=35 mm.

The self-aligning clevis meeting your specifications—a 35 mm internal bush diameter, for the CD70/CD210 cylinder range, with an 80 mm piston diameter—is the CGK 35.✅ Product ConfirmationThe model CGK 35 is the correct choice. The official Rexroth documentation designates it for the CD210 and CG210 series . It features an internal bush diameter (CN) of 35 mm .Specification DetailType CGK 35Material No. R900012486Internal Bush Diameter (CN) 35 mmThread (KK) M36 x 3Weight (approx.) 1.4 kgStatic Load Rating (C₀) 146 kNMax. Admissible Load (Fadm) 48.2 kNMisalignment Angle (Z) 6°While the primary table lists the CGK 35 for the CD210/CG210 series , the second row of the table shows that the same combination (80 mm piston with a 45 mm rod) for the CD70/CG70 series uses the CGK 30 . It's recommended to verify which cylinder series you are using. If it's CD70, the model should be CGK 30; if it's CD210, the model is CGK 35.

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=40 mm.

The correct self-aligning clevis for your specified parameters is the CGK 40. This is confirmed by the official Bosch Rexroth documentation, which shows it as the "Swivel head CGK" for the CD70, CG70, CD210, and CG210 cylinder series with a 100 mm piston diameter and a 40 mm internal bush diameter .The component is manufactured to the ISO 12240-4 standard .Here are the key technical specifications for the CGK 40 from the Rexroth catalog:Parameter SpecificationType CGK 40 Material Number R900001332 Internal Bush Diameter (ØD5) 40 mm Thread (D1) M39x3 Weight (m) 2.0 kg Static Load Rating (C₀) 180 kN Max. Admissible Load (Fadm) 59.4 kN Misalignment Angle (Z) 7°

Self-Aligning Clevis CGK -(Rexroth - Bosch) Accessories - ISO 6126 / DIN 648. - Internal Bush Diameter CN=45 mm.

The correct self-aligning clevis for your CD70/CD210 cylinder with a 125 mm piston diameter is the CGK 45, as it has the matching internal bush diameter of 45 mm (CN=45) .Here are the key specifications from the Rexroth documentation:Parameter SpecificationType CGK 45 Material Number R900001333 Internal Bush Diameter (ØD5) 45 mm (matches your CN specification)Thread (D1) M42 x 3 Weight (m) 2.7 kg Static Load Rating (C₀) 240 kN Max. Admissible Load (Fadm) 79.2 kN Note on Lubrication: This variant is designated with a 2) in the catalog, indicating it can be re-lubricated via a lubrication hole in the housing .