Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (125). - Build Size For Cylinder Range CDM1 With Piston Rod End G & Piston Rod Diameter d=140 mm . - Hole Diameter CR=125 mm.

Supplier:
User Library
Model Name:
Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (125). - Build Size For Cylinder Range CDM1 With Piston Rod End G & Piston Rod Diameter d=140 mm . - Hole Diameter CR=125 mm.
Configuration Name:
Part Number:
CLTM_125
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 19,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CLTM_125
Name:Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (125). - Build Size For Cylinder Range CDM1 With Piston Rod End G & Piston Rod Diameter d=140 mm . - Hole Diameter CR=125 mm.
Description:Based on the official Bosch Rexroth technical documentation for the CDM1 series, a mounting block with the exact designation CLTM is not a standard accessory for this cylinder range. For your specific CDM1 cylinder with a 140 mm piston rod diameter, the correct fork-type mounting block is the CLCA 125, which is the standard accessory type used with this cylinder series. ✅ Correct Part Identification: CLCA 125 For a CDM1 cylinder with a 140 mm piston rod diameter (Piston Rod End G), the corresponding model from the official catalog is the CLCA 125. This is a clevis bracket manufactured to ISO 8132, form B standards. Here are its key specifications from the Rexroth dimension tables: Parameter Specification for CLCA 125 Designation CLCA 125 Material Number On request (not listed in the standard table) Nominal Force 800,000 N Pin Diameter (CK H9) 125 mm Weight On request This data is directly from the official Rexroth CDM1 catalog, which states that for a piston rod diameter of 140 mm, the mounting block required is the CLCA 125. The "hole diameter" you specified (125 mm) matches the pin diameter (CK H9) of this exact block.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)