Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (40). - Build Size For Cylinder Range CDM1 With Piston Rod End G & Piston Rod Diameter d=45 mm Or Piston Rod End H With D=80 mm & d=56 mm. - Hole Diameter CR=40 mm.

Supplier:
User Library
Model Name:
Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (40). - Build Size For Cylinder Range CDM1 With Piston Rod End G & Piston Rod Diameter d=45 mm Or Piston Rod End H With D=80 mm & d=56 mm. - Hole Diameter CR=40 mm.
Configuration Name:
Part Number:
CLTM_40
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 19,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CLTM_40
Name:Mounting Block CLTM - (Rexroth - Bosch) Accessories. - CLTM (40). - Build Size For Cylinder Range CDM1 With Piston Rod End G & Piston Rod Diameter d=45 mm Or Piston Rod End H With D=80 mm & d=56 mm. - Hole Diameter CR=40 mm.
Description:The specific "CLTM (40)" designation you are searching for is not listed as a standard Rexroth mounting block for the CDM1 cylinder range. The official Bosch Rexroth catalog for the CDM1 series shows that the correct accessory for fork-type mounting is from the CLCA series . ✅ Correct Accessory Identification: CLCA 50 According to the official dimension tables for the CDM1 series, the correct fork-type mounting block for a piston rod diameter of 56 mm (associated with Piston Rod End H, D=80mm) is the CLCA 50 . This block is manufactured to ISO 8132, form B . Please see the key specifications below . Parameter Specification for CLCA 50 Designation CLCA 50 Material Number R900542867 Nominal Force 125,000 N (125 kN) Pin Diameter (CK H9) 50 mm Weight (approx.) 15.5 kg Important Note: The "Hole Diameter CR" you specified as 40 mm corresponds to the CLCA 40 block. However, the official table shows this is paired with a 45 mm piston rod, not the 56 mm rod you mentioned for piston rod end H with D=80 mm . For a 56 mm rod, the correct block is definitively the CLCA 50.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)