Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 63. - Bush Internal Diameter DN=63. - For Cylinder Range CDM1 / CDL1.

Supplier:
User Library
Model Name:
Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 63. - Bush Internal Diameter DN=63. - For Cylinder Range CDM1 / CDL1.
Configuration Name:
0.0.294.14
Part Number:
CGKM_63
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 20,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGKM_63
Name:Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 63. - Bush Internal Diameter DN=63. - For Cylinder Range CDM1 / CDL1.
Description:Based on the available search results, a Bosch Rexroth self-aligning clevis designated as CGKM could not be found. However, the correct model for a self-aligning clevis with a 63 mm internal bush diameter for the CDM1 / CDL1 cylinder ranges is CGKD 63 . ✅ Correct Part Identification: CGKD 63 The CGKD designation is the standard type used for clampable swivel heads across the relevant cylinder families, and multiple sources confirm the CGKD 63 model as the component with a 63 mm internal bush diameter . 📊 Specifications for CGKD 63 Here are the key specifications for the CGKD 63 self-aligning clevis: Parameter Specification Type CGKD 63 Material Number R900322028 Internal Bush Diameter (CN H7) 63 mm Nominal Force 200,000 N Thread (KK) M48 x 2 📌 Installation Note: As noted in the documentation for other CGKD variants, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)