Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 40. - Bush Internal Diameter DN=40. - For Cylinder Range CDM1 / CDL1.

Supplier:
User Library
Model Name:
Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 40. - Bush Internal Diameter DN=40. - For Cylinder Range CDM1 / CDL1.
Configuration Name:
Part Number:
CGKM_40
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 20,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGKM_40
Name:Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 40. - Bush Internal Diameter DN=40. - For Cylinder Range CDM1 / CDL1.
Description:Based on the available Bosch Rexroth technical documentation, the CGKM designation you used was not found. However, the search results confirm that the correct self-aligning clevis for a 40 mm internal bush diameter (DN/CN H7) for the CDM1 and CDL1 cylinder ranges is the CGKD 40. ✅ Correct Part Identification: CGKD 40 This is confirmed by the official dimension tables for both the CDM1 / CGM1 / CSM1 and CDH2 / CGH2 series, where the CGKD 40 is listed with an internal bush diameter (CN H7) of 40 mm. 📊 Specifications for CGKD 40 Here are the key specifications for the CGKD 40 self-aligning clevis: Parameter Specification Type CGKD 40 Material Number R900322029 Internal Bush Diameter (CN H7) 40 mm Nominal Force 80,000 N Thread (KK) M33 x 2 Clamping Screw M10 x 30 (ISO 4762-10.9) Tightening Torque (Mₜ) 49 Nm Weight (m) 2.1 kg Misalignment Angle (Z) 4° 📌 Installation Note: As noted in the documentation, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)