Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 32. - Bush Internal Diameter DN=32. - For Cylinder Range CDM1 / CDL1.

Supplier:
User Library
Model Name:
Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 32. - Bush Internal Diameter DN=32. - For Cylinder Range CDM1 / CDL1.
Configuration Name:
Part Number:
CGKM_32
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 20,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGKM_32
Name:Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 32. - Bush Internal Diameter DN=32. - For Cylinder Range CDM1 / CDL1.
Description:The specific CGKM designation does not appear in the available documentation. The correct self-aligning clevis for a 32 mm internal bush diameter (DN/CN H7) for the CDM1 and CDL1 cylinder ranges is the CGKD 32. ✅ Correct Part Identification: CGKD 32 This is confirmed by the official dimension tables for both the CDM1 / CGM1 / CSM1 and CDH2 / CGH2 series, where the CGKD 32 is listed with an internal bush diameter of 32 mm. 📊 Specifications for CGKD 32 Here are the key specifications for the CGKD 32 self-aligning clevis: Parameter Specification Type CGKD 32 Material Number R900322049 Internal Bush Diameter (CN H7) 32 mm Nominal Force 50,000 N Thread (KK) M27 x 2 Clamping Screw M10 x 25 (ISO 4762-10.9) Tightening Torque (Mₜ) 49 Nm Weight (m) 1.15 kg Misalignment Angle (Z) 4° 📌 Installation Note: As noted in the documentation, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)