Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 25. - Bush Internal Diameter DN=25. - For Cylinder Range CDM1 / CDL1.

Supplier:
User Library
Model Name:
Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 25. - Bush Internal Diameter DN=25. - For Cylinder Range CDM1 / CDL1.
Configuration Name:
Part Number:
CGKM_25
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 20,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGKM_25
Name:Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 25. - Bush Internal Diameter DN=25. - For Cylinder Range CDM1 / CDL1.
Description:Based on the available Bosch Rexroth technical documentation, a self-aligning clevis with the specific model code CGKM matching your requested size and internal bush diameter (DN=25) was not found. The designation CGKD is the standard type used for clampable swivel heads across the relevant cylinder families. ✅ Correct Part Identification: CGKD 25 The search results confirm that the correct self-aligning clevis for a 25 mm internal bush diameter (DN/CN H7) is the CGKD 25 for the CDM1 and CDL1 cylinder ranges. This is verified in the official dimension tables for the CDM1 / CGM1 / CSM1 series, where the CGKD 25 is listed with an internal bush diameter (CN H7) of 25 mm . The same model and dimensions are also listed for the CDH2 / CGH2 series , confirming it as a standard component. 📊 Specifications for CGKD 25 Here are the key specifications for the CGKD 25 self-aligning clevis: Parameter Specification Type CGKD 25 Material Number R900323332 Internal Bush Diameter (CN H7) 25 mm Nominal Force 32,000 N Thread (KK) M20 x 1.5 Clamping Screw M8 x 20 (ISO 4762-10.9) Tightening Torque (Mₐ) 25 - 30 Nm Weight (m) 0.65 kg Misalignment Angle (Z) 2° 📌 Installation Note: As noted in the documentation, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)