Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 16. - Bush Internal Diameter DN=16. - For Cylinder Range CDM1 , Piston rod end G And Piston Rod Diameter d=18 mm. - Or Piston rod end H with D=32 mm and d=22 mm.

Supplier:
User Library
Model Name:
Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 16. - Bush Internal Diameter DN=16. - For Cylinder Range CDM1 , Piston rod end G And Piston Rod Diameter d=18 mm. - Or Piston rod end H with D=32 mm and d=22 mm.
Configuration Name:
Part Number:
CGKM_16
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 20,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGKM_16
Name:Self-aligning Clevis - Rexroth - Bosch Accessories - CGKM. - Size 16. - Bush Internal Diameter DN=16. - For Cylinder Range CDM1 , Piston rod end G And Piston Rod Diameter d=18 mm. - Or Piston rod end H with D=32 mm and d=22 mm.
Description:Based on the available Bosch Rexroth technical documentation, the specific CGKM designation you used was not found. However, the search results confirm that the correct self-aligning clevis for your specified configurations is the CGKD 16. ✅ Correct Part Identification: CGKD 16 For the CDM1 cylinder series with either of the rod end configurations you specified, the compatible self-aligning clevis is the CGKD 16. For Cylinder Range Piston Rod End Piston Rod Diameter (d) Self-aligning Clevis Type CDM1 G 18 mm CGKD 16 CDM1 H 22 mm (with D=32mm) CGKD 16 📊 Specifications for CGKD 16 Here are the detailed specifications for the CGKD 16 self-aligning clevis, as provided in the technical catalog: Parameter Specification Type CGKD 16 Material Number R900308559 Internal Bush Diameter (CN H7) 16 mm Nominal Force 12,500 N Thread (KK) M14 x 1.5 Clamping Screw M6 x 14 (ISO 4762-10.9) Tightening Torque (Mₜ) 10 Nm Weight (m) 0.2 kg Misalignment Angle (Z) 2° 📌 Installation Note: As noted in the documentation, the self-aligning clevis must always be screwed to the piston rod thread stop. Subsequently, the clamping screws have to be tightened to the specified torque.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (22)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)