Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 110. - For Cylinder Range CDH2 , Piston Diameter D=180 mm. - ISO 6982 , DIN 24338.

Supplier:
User Library
Model Name:
Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 110. - For Cylinder Range CDH2 , Piston Diameter D=180 mm. - ISO 6982 , DIN 24338.
Configuration Name:
Part Number:
CGKD110
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 22,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGKD110
Name:Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 110. - For Cylinder Range CDH2 , Piston Diameter D=180 mm. - ISO 6982 , DIN 24338.
Description:Based on the official Bosch Rexroth technical documentation, the correct self-aligning clevis for a CDH2 cylinder with a 180 mm piston diameter is the CGKD 110. 📊 CGKD 110 Specifications The table below lists the key specifications and dimensions for the CGKD 110 from the manufacturer's technical data sheet . Parameter Specification for CGKD 110 Type CGKD 110 Material no. R900544846 (example variant) Thread (KK) M90 x 3 Pin diameter (CN H7) 100 mm (derived from part number) Clamping screw M24 x 60 (ISO 4762-10.9) Tightening torque (MA) 840 Nm Weight (m) 36.5 kg Static load rating (C₀) 1200 kN Max. admissible load (Fadm) 442.8 kN Misalignment angle (Z) 4° 📌 Installation note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .
Supplier part number:CGKD110
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (14)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User