Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 63. - For Cylinder Range CDH2 , Piston Diameter D=100 mm. - ISO 6982 , DIN 24338.

Supplier:
User Library
Model Name:
Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 63. - For Cylinder Range CDH2 , Piston Diameter D=100 mm. - ISO 6982 , DIN 24338.
Configuration Name:
Part Number:
CGKD63
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 22,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGKD63
Name:Self-aligning Clevis - Rexroth - Bosch Accessories - CGKD - Size 63. - For Cylinder Range CDH2 , Piston Diameter D=100 mm. - ISO 6982 , DIN 24338.
Description:The correct self-aligning clevis for a CDH2 cylinder with a 100 mm piston diameter is the CGKD 63, as detailed in the official Rexroth documentation. 📊 CGKD 63 Specifications The table below summarizes the key specifications for the CGKD 63 swivel head, which is also known by the material number R900322028. Parameter Specification for CGKD 63 Type CGKD 63 Material no. R900322028 Nominal force 200,000 N Thread (KK) M48 x 2 Pin diameter (CN H7) 63 mm Clamping screw M16 x 40 (ISO 4762-10.9) Tightening torque (MA) 210 Nm Weight (m) 7.2 kg Misalignment angle (Z) 4° 📌 Installation note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.
Supplier part number:CGKD63
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (14)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User