Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 130. - For Cylinder Range CDH1 , Piston Diameter D=280 mm. - For Cylinder Range CDH3 , Piston Diameter D=250 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 130. - For Cylinder Range CDH1 , Piston Diameter D=280 mm. - For Cylinder Range CDH3 , Piston Diameter D=250 mm.
Configuration Name:
Part Number:
CGAK130
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAK130
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 130. - For Cylinder Range CDH1 , Piston Diameter D=280 mm. - For Cylinder Range CDH3 , Piston Diameter D=250 mm.
Description:Based on the official Bosch Rexroth documentation for the CDH1/CGH1/CSH1 and CDH3/CGH3/CSH3 series, the correct clampable swivel head for your specified cylinder configurations is the CGAK 130. The technical data clearly lists the CGAK 130 for both the CDH1 series with piston diameters (ØAL) of 280 mm and the CDH3 series with piston diameters of 250 mm. 📊 CGAK 130 Specifications Here is a summary of its key specifications from the Rexroth technical data: Parameter Specification for CGAK 130 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 280 mm CDH3/CGH3/CSH3: 250 mm Material No. (Maintenance-required) R900322015 Material No. (Maintenance-free) R900540850 Thread (KK) M130 x 3 Pin Diameter (ØCN) 120 mm Length (L1) 490 mm Static Load Rating (C₀) 2900 kN Max. Admissible Load (Fadm) 1044.0 kN Clamping Screw ISO 4762 - M24 Tightening Torque (MA) 840 Nm Weight (m) 76.4 kg ⚠️ Installation Note: The self-aligning clevis must always be screwed against the piston rod shoulder. Afterwards, the clamping screws must be tightened with the specified tightening torque.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (24)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)