Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 100. - For Cylinder Range CDH1 , Piston Diameter D=180 mm. - For Cylinder Range CDH3 , Piston Diameter D=160 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 100. - For Cylinder Range CDH1 , Piston Diameter D=180 mm. - For Cylinder Range CDH3 , Piston Diameter D=160 mm.
Configuration Name:
Part Number:
CGAK100
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAK100
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 100. - For Cylinder Range CDH1 , Piston Diameter D=180 mm. - For Cylinder Range CDH3 , Piston Diameter D=160 mm.
Description:Based on the official Rexroth technical documentation, the correct clampable swivel head for your specified cylinder configurations is the CGAK 100 . The technical data from the catalog clearly lists this model as the accessory for the CDH1/CGH1/CSH1 series with a piston diameter (ØAL) of 180 mm, and the CDH3/CGH3/CSH3 series with a piston diameter of 160 mm . 📊 CGAK 100 Specifications Here is a summary of its key specifications from the Rexroth technical data : Parameter Specification for CGAK 100 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 180 mm CDH3/CGH3/CSH3: 160 mm Material No. (Standard) R900303133 (for CDH1) R900312165 (for CDH3) Thread (KK) M100 x 2 Length (L1) 323 mm Weight (m) 21.5 kg Static Load Rating (C₀) 980 kN Max. Admissible Load (Fadm) 352.8 kN Clamping Screw ISO 4762 - M20 Tightening Torque (MA) 490 Nm Angle of Misalignment (Z) 5° ⚠️ Installation Note: The self-aligning clevis must always be screwed against the piston rod shoulder. Afterwards, the clamping screws must be tightened with the specified tightening torque .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (24)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)