Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 65. - For Cylinder Range CDH1 , Piston Diameter D=140 mm. - For Cylinder Range CDH3 , Piston Diameter D=125 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 65. - For Cylinder Range CDH1 , Piston Diameter D=140 mm. - For Cylinder Range CDH3 , Piston Diameter D=125 mm.
Configuration Name:
Part Number:
CGAK_65
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAK_65
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 65. - For Cylinder Range CDH1 , Piston Diameter D=140 mm. - For Cylinder Range CDH3 , Piston Diameter D=125 mm.
Description:The correct self-aligning clevis (swivel head) for your specified Rexroth cylinder configurations is the CGAK 65. This swivel head is documented as an accessory for the CDH1 and CGH1 mill-type cylinder series, which also applies to the CDH3 series under the same technical documentation . The data confirms it is compatible with a CDH1 cylinder with a 140 mm piston and a CDH3 cylinder with a 125 mm piston . 📊 CGAK 65 Specifications Here is a summary of its key specifications, including the material number, based on the Rexroth technical catalog for the CDH1/CGH1/CSH1 and CDH3/CGH3/CSH3 series : Parameter Specification for CGAK 65 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 140 mm CDH3/CGH3/CSH3: 125 mm Material No. (Maintenance-required) R900303168 Thread (KK) M65 x 1.5 Pin Diameter (CN) 70 mm Weight (approx.) 10.5 kg Static Load Rating (C₀) 745 kN Max. Admissible Load (Fadm) 268.2 kN Angle of Misalignment (Z) 6° Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (24)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)