Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 16. - For Cylinder Range CDH1 , Piston Diameter D=40 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 16. - For Cylinder Range CDH1 , Piston Diameter D=40 mm.
Configuration Name:
Part Number:
CGAK_16
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAK_16
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAK - Size 16. - For Cylinder Range CDH1 , Piston Diameter D=40 mm.
Description:Based on the official Rexroth technical documentation, the correct clampable swivel head for your CDH1 cylinder with a 40 mm piston diameter is the CGAK 16. This component is designed to attach to the piston rod and compensate for angular misalignment in your hydraulic system. 📊 CGAK 16 Specifications Here is a summary of its key specifications from the Rexroth catalog data : Parameter Specification Type CGAK 16 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 40 mm Material No. (Maintenance-required) R900303162 Material No. (Maintenance-free) R900321784 Material No. (Flat Grease Nipple) R900321521 Thread (KK) M16 x 1.5 Pin Diameter (ØCN) 25 mm Length L1 80 mm Clamping Screw ISO 4762 - M8 Tightening Torque (MA) 30 Nm Weight (m) 0.43 kg Static Load Rating (C₀) 72 kN Max. Admissible Load (Fadm) 25.9 kN Angle of Misalignment (Z) 7° Installation Note: The self-aligning clevis must always be screwed against the piston rod thread stop. Afterwards, the clamping screws must be tightened with the specified tightening torque .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (22)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)