Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 90. - For Cylinder Range CDH1 , Piston Diameter D=180 mm. - For Cylinder Range CDH3 , Piston Diameter D=160 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 90. - For Cylinder Range CDH1 , Piston Diameter D=180 mm. - For Cylinder Range CDH3 , Piston Diameter D=160 mm.
Configuration Name:
Part Number:
CGAS_90
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
Wrong PartNumber="CGAS_90" specified. Please check the configuration information before proceeding: model configuration will be set to default configuration.
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAS_90
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 90. - For Cylinder Range CDH1 , Piston Diameter D=180 mm. - For Cylinder Range CDH3 , Piston Diameter D=160 mm.
Description:The correct self-aligning clevis for a CDH1 cylinder with a 180 mm piston or a CDH3 cylinder with a 160 mm piston is the CGAS 90. CGAS 90 Specifications Based on the official Rexroth documentation, here are the key specifications for the CGAS 90: Parameter Specification for CGAS 90 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 180 mm CDH3/CGH3/CSH3: 160 mm Length L1 (max.) 366 mm Length LF (min.) 90 mm Angle of Misalignment 5° Clamping Screw M20 Tightening Torque (MA) 490 Nm Weight (m) 31.6 kg Static Load Rating (C₀) 1284 kN Max. Admissible Load (Fadm) 423.7 kN 📌 Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.
Supplier part number:CGAS_90
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User