Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 70. - For Cylinder Range CDH1 , Piston Diameter D=140 mm. - For Cylinder Range CDH3 , Piston Diameter D=125 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 70. - For Cylinder Range CDH1 , Piston Diameter D=140 mm. - For Cylinder Range CDH3 , Piston Diameter D=125 mm.
Configuration Name:
Part Number:
CGAS_70
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAS_70
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 70. - For Cylinder Range CDH1 , Piston Diameter D=140 mm. - For Cylinder Range CDH3 , Piston Diameter D=125 mm.
Description:The correct self-aligning clevis (swivel head) for your specified Rexroth cylinders is the CGAS 70. This clampable swivel head is documented as an accessory for the specified CDH1 and CDH3 series cylinders . The size 70 corresponds to the clevis size required for a CDH1 cylinder with a 140 mm piston or a CDH3 cylinder with a 125 mm piston . 📊 CGAS 70 Specifications Parameter Specification For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 140 mm CDH3/CGH3/CSH3: 125 mm Length L1 (max.) 279 mm Length LF (min.) 75 mm Angle of Misalignment 6° Clamping Screw M16 Tightening Torque (MA) 250 Nm Weight (m) 12.2 kg 📌 Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.
Supplier part number:CGAS_70
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (23)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User