Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 50. - For Cylinder Range CDH1 , Piston Diameter D=100 mm. - For Cylinder Range CDH3 , Piston Diameter D=80 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 50. - For Cylinder Range CDH1 , Piston Diameter D=100 mm. - For Cylinder Range CDH3 , Piston Diameter D=80 mm.
Configuration Name:
Part Number:
CGAS_50
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
Wrong PartNumber="CGAS_50" specified. Please check the configuration information before proceeding: model configuration will be set to default configuration.
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAS_50
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 50. - For Cylinder Range CDH1 , Piston Diameter D=100 mm. - For Cylinder Range CDH3 , Piston Diameter D=80 mm.
Description:The correct self-aligning clevis (swivel head) for your specified Rexroth cylinders is the CGAS 50. For a CDH1 cylinder with a 100 mm piston or a CDH3 cylinder with an 80 mm piston, the CGAS 50 is the recommended accessory. Here are the key specifications from the official documentation. CGAS 50 Specifications Parameter Specification for CGAS 50 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 100 mm CDH3/CGH3/CSH3: 80 mm Material No. (Maintenance-required) R900303141 Material No. (Maintenance-free) R900322017 Material No. (Flat Grease Nipple) R900321885 Length L1 (max.) 198 mm Length LF (min.) 55 mm Clamping Screw M12 (ISO 4762-10.9) Tightening Torque (MA) 100 Nm Static Load Rating (C₀) 422 kN Max. Admissible Load (Fadm) 139.3 kN Thread (KK) M50 x 3 Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .
Supplier part number:CGAS_50
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (24)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User