Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 40. - For Cylinder Range CDH1 , Piston Diameter D=80 mm. - For Cylinder Range CDH3 , Piston Diameter D=63 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 40. - For Cylinder Range CDH1 , Piston Diameter D=80 mm. - For Cylinder Range CDH3 , Piston Diameter D=63 mm.
Configuration Name:
Part Number:
CGAS_40
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAS_40
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 40. - For Cylinder Range CDH1 , Piston Diameter D=80 mm. - For Cylinder Range CDH3 , Piston Diameter D=63 mm.
Description:The correct self-aligning clevis for your specified Rexroth cylinder configurations is the CGAS 40. This component is a clampable swivel head (Gelenkkopf) designed to attach to the piston rod and compensate for angular misalignment . The size "40" refers to the clevis size, which matches the piston diameters you specified . 📊 CGAS 40 Specifications Here is a summary of its key specifications based on the official Rexroth catalog data : Parameter Specification Type CGAS 40 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 80 mm CDH3/CGH3/CSH3: 63 mm Material No. (Maintenance-required) R900303140 Material No. (Maintenance-free) R900321665 Material No. (Flat Grease Nipple) R900321650 Thread (KK) M39 x 3 Pin Diameter (ØCN) 40 mm Length L1 (max.) 155 mm Length LF (min.) 44 mm Clamping Screw ISO 4762 - M12 Tightening Torque (MA) 100 Nm Weight (m) 2.4 kg Static Load Rating (C₀) 287 kN Max. Admissible Load (Fadm) 94.7 kN Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (24)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)