Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 30. - For Cylinder Range CDH1 , Piston Diameter D=50 mm. - For Cylinder Range CDH3 , Piston Diameter D=40 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 30. - For Cylinder Range CDH1 , Piston Diameter D=50 mm. - For Cylinder Range CDH3 , Piston Diameter D=40 mm.
Configuration Name:
Part Number:
CGAS_30
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGAS_30
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGAS - Size 30. - For Cylinder Range CDH1 , Piston Diameter D=50 mm. - For Cylinder Range CDH3 , Piston Diameter D=40 mm.
Description:Based on the official Rexroth documentation, the correct self-aligning clevis (swivel head) for your specified cylinder configurations is the CGAS 30. This component is designed to attach to the piston rod, allowing for angular misalignment . The "CGAS" is a clampable swivel head, and the "30" in the name refers to the size of the clevis, not the pin diameter. 📊 CGAS 30 Specifications Here is a summary of its key specifications from the official Rexroth catalog : Parameter Specification Type CGAS 30 For Cylinder (Piston Ø) CDH1/CGH1/CSH1: 50 mm, CDH3/CGH3/CSH3: 40 mm Material No. (Maintenance-required) R900303138 Material No. (Maintenance-free) R900321696 Material No. (Flat Grease Nipple) R900321627 Length L1 (max.) 109 mm Length LF (min.) 30 mm Clamping Screw ISO 4762 - M8 Tightening Torque (MA) 30 Nm Weight (m) 1.0 kg Static Load Rating (C₀) 122 kN Max. Admissible Load (Fadm) 40.3 kN Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (24)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)