Rexroth - Bosch Accessories - Self-aligning Clevis - CGA - Size 80. - For Cylinder Range CDH1 , Piston Diameter D=160 mm. - For Cylinder Range CDH3 , Piston Diameter D=140 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGA - Size 80. - For Cylinder Range CDH1 , Piston Diameter D=160 mm. - For Cylinder Range CDH3 , Piston Diameter D=140 mm.
Configuration Name:
Part Number:
CGA_80
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
Wrong PartNumber="CGA_80" specified. Please check the configuration information before proceeding: model configuration will be set to default configuration.
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGA_80
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGA - Size 80. - For Cylinder Range CDH1 , Piston Diameter D=160 mm. - For Cylinder Range CDH3 , Piston Diameter D=140 mm.
Description:The correct self-aligning clevis for your CDH1 cylinder (160 mm piston) and CDH3 cylinder (140 mm piston) is the CGA 80. Here are the detailed technical specifications from the official Rexroth documentation . 📊 CGA 80 Specifications Parameter Specification Type CGA 80 Material Number R900303132 Thread (KK) M80 x 2 Length (L1) 265 mm Pin Diameter (CN) 80 mm Weight 12.2 kg Static Load Rating (C₀) 670 kN Max. Admissible Load 241.2 kN This clevis is compatible with: CDH1/CGH1/CSH1 cylinder series: Piston diameter 160 mm . CDH3/CGH3/CSH3 cylinder series: Piston diameter 140 mm . Installation Note: The self-aligning clevis must always be screwed against the shoulder of the piston rod until tight .
Supplier part number:CGA_80
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (24)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User