Rexroth - Bosch Accessories - Self-aligning Clevis - CGA - Size 45. - For Cylinder Range CDH1 , Piston Diameter D=100 mm. - For Cylinder Range CDH3 , Piston Diameter D=80 mm.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - Self-aligning Clevis - CGA - Size 45. - For Cylinder Range CDH1 , Piston Diameter D=100 mm. - For Cylinder Range CDH3 , Piston Diameter D=80 mm.
Configuration Name:
Part Number:
CGA_45
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CGA_45
Name:Rexroth - Bosch Accessories - Self-aligning Clevis - CGA - Size 45. - For Cylinder Range CDH1 , Piston Diameter D=100 mm. - For Cylinder Range CDH3 , Piston Diameter D=80 mm.
Description:The correct self-aligning clevis for your specified Rexroth cylinder configurations is the CGAK 45 . 📊 Self-aligning Clevis CGAK 45 Specifications This table details the specifications of the CGAK 45 from the official Rexroth mounting elements documentation . Parameter Specification Type CGAK 45 Material Number R900303166 Thread (KK) M45x1.5 Pin Diameter (ØCN) 50 mm Weight (approx.) 3.3 kg Static Load Rating (C₀) 365 kN Max. Admissible Load (F_adm) 131.4 kN This clevis is compatible with: CDH1 cylinder series: Piston diameter 100 mm . CDH3 cylinder series: Piston diameter 80 mm . ⚠️ Critical Installation Note: The self-aligning clevis must always be screwed against the piston rod thread stop. Afterwards, the clamping screws must be tightened with the specified tightening torque .
Supplier part number:CGA_45
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (24)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)
Contributor
Other contributions from this user

Parts & Assemblies

 

 

 
Hassan Hussein

User since: 8/13/2026
Title: Engineer
 
Skills:
Experience Developing Mechanical Components And Systems From Initial Concept To Manufacturing
Interests:
Mechanical Design. Computer-Aided Design (CAD). Mechanical Components. Manufacturing. Software Tools. Innovative Solutions. Efficiency, And Cost-Effectiveness.
 
  Report Inappropriate User