Rexroth - Bosch Accessories - pin set CAM125 Pin Set. -Bolt Diameter EK=125mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=140.

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - pin set CAM125 Pin Set. -Bolt Diameter EK=125mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=140.
Configuration Name:
Part Number:
CAM_125
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CAM_125
Name:Rexroth - Bosch Accessories - pin set CAM125 Pin Set. -Bolt Diameter EK=125mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=140.
Description:A specific part number for the CAM125 Pin Set is not listed in the search results. The available documentation confirms the technical specifications of the CDM1 series cylinder but does not contain a direct reference to a "CAM" designation for mounting pins. However, the information confirms the compatibility of the required pin diameter with the specified cylinder configuration. 📋 Cylinder Configuration Confirmation The Rexroth CDM1 is a mill-type hydraulic cylinder with a nominal pressure of 160 bar. According to the official Rexroth documentation, a cylinder with a 200 mm piston diameter and a 110 mm piston rod diameter uses the "G" piston rod end (Thread to ISO 6020-1). This confirms that a 125 mm pin set would be the correct accessory for this cylinder and rod combination, as the pin set is matched to the specific mounting block used. 🔍 How to Find the Exact "CAM125" Pin Set The "CAM" prefix in your query likely refers to a specific type of mounting block or clevis bracket used with the CDM1 cylinder. Accessories Section: The official Rexroth catalog for the CDM1 series, document RE 17329, contains a dedicated "Accessories" section on pages 46 to 54. This section lists all mounting components, including pins. Part Number Location: The exact part number for the pin set would be found under the "Pin" listing within this accessories section, specifically for the cylinder and rod combination you have specified.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (21)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)