Rexroth - Bosch Accessories - pin set CAM100 Pin Set. -Bolt Diameter EK=100mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=110 Or Piston Rod End H With D=200 mm And d=140 mm

Supplier:
User Library
Model Name:
Rexroth - Bosch Accessories - pin set CAM100 Pin Set. -Bolt Diameter EK=100mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=110 Or Piston Rod End H With D=200 mm And d=140 mm
Configuration Name:
Part Number:
CAM_100
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 25,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CAM_100
Name:Rexroth - Bosch Accessories - pin set CAM100 Pin Set. -Bolt Diameter EK=100mm. -For Cylinder Range CDM1. -With Piston Rod End G And Piston Rod Diameter d=110 Or Piston Rod End H With D=200 mm And d=140 mm
Description:The specific part number for a CAM100 Pin Set cannot be confirmed from the search results. However, the technical documentation for the CDM1 cylinder series confirms the rod thread specifications for the two configurations you requested. This information is the key to selecting the correct mounting pin set. ✅ Confirmed CDM1 Cylinder Configuration Data For a CDM1 cylinder, the piston rod end code defines the thread type used. The table below summarizes the thread data for the two rod end variants you specified : Specification Piston Rod End "G" (d=110 mm) Piston Rod End "H" (D=200 mm, d=140 mm) Piston Diameter (ØAL) 200 mm 200 mm Piston Rod Diameter (ØMM) 110 mm 140 mm Rod Thread (KK) Type M64 x 3 (ISO 6020-1) M48 x 2 (VW 39 D 920) 🧭 Finding the Correct "CAM100" Pin Set The CAM designation is not a standard component code found in the available Rexroth CDM1 documentation. The catalog instead lists accessories like mounting blocks and pins under generic names, with the specific part numbers provided in the tables . To find the exact part number for your pin set, you should consult the "Accessories" section of the official Bosch Rexroth CDM1 / CGM1 / CSM1 catalog (RE 17329) . The required components are listed by pin diameter (100mm) and are associated with specific cylinder sizes and mounting blocks. The table of contents for this document points to pages 46 to 54 for the "Accessories" section, which would contain the part number for the "Pin" you need .
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (21)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)