Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 120T) Cylinder Internal Diameter = 25 mm , Stroke Length S=200 mm

Supplier:
User Library
Model Name:
Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 120T) Cylinder Internal Diameter = 25 mm , Stroke Length S=200 mm
Configuration Name:
Part Number:
CD210T40-25-200Z1X-
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 26,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CD210T40-25-200Z1X-
Name:Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 120T) Cylinder Internal Diameter = 25 mm , Stroke Length S=200 mm
Description:The Rexroth tie-rod cylinder model number CD 120T could not be found in standard documentation. The "T" likely refers to a specific mounting style, but it is not a standard Rexroth code for commonly documented series . 🔍 Available Information on Related Tie-Rod Cylinders The "CD" designation is used for Rexroth tie-rod cylinders, and the general specifications from similar series are shown below as a reference: Parameter Specification Series Example CD70, CDT3 Design Tie-rod cylinder Nominal Pressure Up to 210 bar Piston Diameter Available in 25 mm Stroke Length Up to 3000 mm A specific example, the CD70P 25/16-0060, confirms a 25 mm piston diameter with a 16 mm piston rod for a 60 mm stroke . The 200 mm stroke you requested falls within the maximum 3000 mm stroke limit of these series. 🧭 How to Find Exact Specifications To locate the exact specifications for the CD 120T model: Verify the Mounting Style: The "T" most likely stands for a mounting style (e.g., foot, flange, trunnion). Confirming the type of mounting you need is crucial for selecting the right cylinder. Consult Official Documentation: The primary source for Rexroth tie-rod cylinders is the RE 17016 datasheet. A direct review of this document will provide the definitive list of available mounting styles and dimensional drawings for a 25 mm bore. Contact Rexroth Support: For the most accurate information on specific, potentially non-standard, or older model variants, contacting Bosch Rexroth directly is recommended.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (11)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)