Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 70M) Cylinder Internal Diameter = 25 mm , Stroke Length S=200 mm - RE 17016/07.03

Supplier:
User Library
Model Name:
Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 70M) Cylinder Internal Diameter = 25 mm , Stroke Length S=200 mm - RE 17016/07.03
Configuration Name:
Part Number:
CD70M25-16-200Z1X
Quantity:
First Name:
Last Name:
Email:
Phone Number:
Company Name:
Address:
City:
State/Province:
Country:
Zip or Postal Code:
Comments:
Email me a copy:
   
Modified on: August 26,2026  
Rating: 
Downloads: 0
 
Comments: 
 
 

Do you have a better or corrected version of this model?
Post Alternate Version   (Login required)
Embed this 3D Model in your Blog

 
Report inappropriate content

Specifications
Supplier part number: CD70M25-16-200Z1X
Name:Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 70M) Cylinder Internal Diameter = 25 mm , Stroke Length S=200 mm - RE 17016/07.03
Description:The official Rexroth documentation for the CD70 series contains a critical specification regarding the configuration you've requested: the CD70M cylinder with a 25 mm piston diameter and a 200 mm stroke is not a standard configuration due to piston rod buckling limitations. 📘 Confirmed Series Specifications The "M" in the model number designates "Foot mounting with seal ring sealing for subplate mounting". For the CD70 series, the key general specifications are confirmed: Parameter Specification Series CD70 (Tie-Rod Cylinder) Nominal Pressure 70 bar [7 MPa] Piston Diameter (ØAL) 25 mm Stroke Length 200 mm (max up to 3000 mm) 🚫 Critical Design Constraint The official "admissible stroke lengths" table shows that for a 25 mm piston, regardless of the rod diameter (12 mm or 16 mm), a stroke of 200 mm is not permissible at any operating pressure. This means a 32 mm piston is the smallest diameter that can support a 200 mm stroke (with an 18 mm rod, up to 670 mm is permissible at 70 bar). For your application, a larger cylinder bore (e.g., 32 mm or above) would be required to safely achieve a 200 mm stroke.
    
  • Configure & Download
  • Rating & Comments (0)
  • Tags (14)
  • Alternate Versions

 

Download the model according to the specified sizing parameters in either 3D or 2D format.
(Login required)
  Be the First to Rate this Part  (Login required)

Report Inappropriate Comment
   


Do you have a different version of this model? Post Alternate Version (Login required)